This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(5) | ASME B&PV Code | 1969 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels, Including Addenda | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-27A | 1969 | Specification for L-807 Eight-foot and Twelve-foot Unlighted or Externally Lighted Wind Cone Assemblies | Federal Aviation Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 21 CFR 177.2490(a) | FDA Publication | 1969 | Determination of the Inherent Viscosity of Polyphenylene Sulfide | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1926.453 Note | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 533.1R | 1969 | Quality Standards and Tests for Precast Concrete Wall Panels | American Concrete Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.268(j)(4)(iv)(H) | ANSI B30.6 | 1969 | Safety Code for Derricks | American National Standards Institute | |
Coast Guard | 46 CFR 160.010-1(d)(2) | MIL-P-21929B | 1969 | Plastic Material, Cellular, Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot) | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI Addenda B31.1 | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5325-8 | 1969 | Compass Calibration Pad | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-27A | 1969 | Specification for L-807 Eight-foot and Twelve-foot Unlighted or Externally Lighted Wind Cone Assemblies | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(72) | ANSI Z88.2 | 1969 | Practices for Respiratory Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(5) | AWS D2.0 | 1969 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
Environmental Protection Agency | 40 CFR 61.93(b)(2)(ii) | ANSI N13.1 | 1969 | Guide to Sampling Airborne Radioactive Materials in Nuclear Facilities | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(27) | NFPA 251 | 1969 | Standard Methods of Fire Tests of Building Construction and Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(16) | ANSI B56.1 | 1969 | Safety Standards for Powered Industrial Trucks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.178(a)(2) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks, Part II | American National Standards Institute | |
Labor Department | 89 FR 28218 | 30 CFR 57 | ANSI Z88.2-1969 | 1969 | Lowering Miners' Exposure to Respirable Crystalline Silica and Improving Respiratory Protection | American National Standards Institute |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5325-8 | 1969 | Compass Calibration Pad | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Aviation Administration | 14 CFR 152.11(b) | 150/5390-1A | 1969 | Heliport Design Guide | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(12) | ANSI A90.1 | 1969 | Safety Standard for Manlifts | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.261(s) Silvery iron | ASTM A100 | 1969 | Standard Specification for Ferrosilicon | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.552(b)(8) | ANSI A10.5 | 1969 | Safety Requirements for Material Hoists | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(13)(ii)(B)(1) | ASTM B88 | 1969 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.178(a)(3) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks, Part II | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(3) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(30)(iv) | ANSI B56.1 | 1969 | Safety Code for Powered Industrial Trucks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(iii)(B) | ANSI Addenda B31.1 | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(b)(4)(i) | NFPA 251 | 1969 | Standard Methods of Fire Tests for Building Construction and Materials | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 233.70(a)(5) | MIOD regulations | 1969 | The Michigan Administrative Procedures Act of 1969, MCL 24-201 et seq. | State of Michigan | |
Federal Aviation Administration | 14 CFR 152, Appendix B(b) | 150/5390-1A | 1969 | Heliport Design Guide | Federal Aviation Administration, U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320a | 1969 | Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 17 | 1969 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.178(f)(1) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(1) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Labor Department | 89 FR 28218 | 30 CFR 70 | ANSI Z88.2-1969 | 1969 | Lowering Miners' Exposure to Respirable Crystalline Silica and Improving Respiratory Protection | American National Standards Institute |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (2) | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(3)(iv) | NFPA 58 | 1969 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429d | 1969 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(15) | SAE J-397 | 1969 | Critical Zone Characteristics and Dimensions for Operators of Construction and Industrial Machinery | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.95 Appendix E | ANSI S3.6 | 1969 | Specifications for Audiometers | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(13) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-995a | 1969 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.5005(b) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(3) | ASTM D56 | 1969 | Standard Method of Test for Flash Point by the Tag Closed Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(20)(iv)(A) | NFPA 54 | 1969 | Standard for the Installation of Gas Appliances and Gas Piping | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 198 | 1969 | Standard for the Care of Fire Hose | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.178(f)(2) | NFPA 58 | 1969 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(f)(1)(ii) | SAE J-397 | 1969 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers |