Environmental Protection Agency |
|
40 CFR 60.58a(h)(6)(ii) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4
|
American Society of Mechanical Engineers |
Federal Aviation Administration |
|
14 CFR 152.11(a) |
150/5345-39A |
1971 |
Runway and Taxiway Retroreflective Markers
|
Federal Aviation Administration, U.S. Department of Transportation |
Occupational Safety and Health Administration |
|
29 CFR 1926.1002(k) |
SAE Publication |
1971 |
SAE Handbook
|
Society of Automotive Engineers |
Federal Railroad Administration |
|
49 CFR 229.51(a)(1) |
ASME B&PV Code |
1971 |
Boiler and Pressure Vessel Code, Section II
|
American Society of Mechanical Engineers |
Coast Guard |
|
29 CFR 1926.6(dd)(14) |
SAE J-396 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders
|
Society of Automotive Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.602(a)(4) |
SAE J-237 |
1971 |
Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 160.171-17(o) |
Federal Standard 191A |
1971 |
Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method
|
Federal Specifications Standards and Test Methods |
Occupational Safety and Health Administration |
|
29 CFR 1926.1003(g) |
SAE Publication |
1971 |
SAE Handbook
|
Society of Automotive Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(7) |
SAE J-237 |
1971 |
Front End Loaders and Dozers
|
Society of Automotive Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.951(a)(1)(i) |
ANSI J6.1 |
1971 |
Rubber Insulating Line Hose
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(79) |
ANSI Z89.2 |
1971 |
Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B
|
American National Standards Institute |
Coast Guard |
|
40 CFR 136.3(a) Table IB (38) |
EPA Method 352.1 |
1971 |
Nitrate Nitrogen - Brucine
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 160.023-5(a) |
MIL-S-18655 |
1971 |
Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0
|
U.S. Department of Defense |
Coast Guard |
|
46 CFR 160.040-2(c) |
MIL-R-45505 |
1971 |
Line Throwing Apparatuses, Rocket and Projectile Units
|
U.S. Department of Defense |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(39) |
ANSI J6.6 |
1971 |
Rubber Insulating Gloves
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.145(d)(10) |
ANSI B114.1 |
1971 |
Emblem for Identifying Slow Moving Vehicles
|
American National Standards Institute |
National Highway Traffic Safety Administration |
|
49 CFR 571.222 S6.6.2 |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5335-3 |
1971 |
Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports
|
Federal Aviation Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 60.58b(i)(6)(ii) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4
|
American Society of Mechanical Engineers |
Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-39A |
1971 |
Runway and Taxiway Retroreflective Markers
|
Federal Aviation Administration, U.S. Department of Transportation |
Federal Railroad Administration |
|
49 CFR 229.51(a)(2) |
ASME B&PV Code |
1971 |
Boiler and Pressure Vessel Code, Section VIII, Division 1
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.602(a)(4) |
SAE J-319b |
1971 |
Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers
|
Society of Automotive Engineers |
National Highway Traffic Safety Administration |
|
49 CFR 572.11(e) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(8) |
SAE J-319b |
1971 |
Self-Propelled Scrapers
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 141.25(a) Table Note 5 |
APHA Standard Methods, 13th Edition |
1971 |
Standard Methods for the Examination of Water and Wastewater. 13th Edition
|
American Public Health Association |
Occupational Safety and Health Administration |
|
29 CFR 1926.951(a)(1)(i) |
ANSI J6.5 |
1971 |
Rubber Insulating Sleeves
|
American National Standards Institute |
Coast Guard |
|
46 CFR 160.023-2(a) |
MIL-S-18655 |
1971 |
Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0
|
U.S. Department of Defense |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-1641 |
1971 |
Floor Covering, Translucent or Transparent Vinyl Surface with Backing
|
Federal Specifications Standards and Test Methods |
Rural Utilities Service |
|
7 CFR 1728.97(a)(5) |
RUS Bulletin 50-23 (DT-18) |
1971 |
RUS Specification for 60-inch Wood Crossarm Braces
|
Rural Utilities Service, U.S. Department of Agriculture |
Environmental Protection Agency |
|
40 CFR 60.1320(a)(4) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4
|
American Society of Mechanical Engineers |
Coast Guard |
|
46 CFR 160.023-1(a)(1) |
MIL-S-18655C |
1971 |
Signal, Smoke and Illumination, Marine, Mark 13, Mod 0.
|
U.S. Department of Defense |
Environmental Protection Agency |
|
40 CFR 61.18(a)(10) |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
Coast Guard |
|
46 CFR 160.023-3(a) |
MIL-S-18655 |
1971 |
Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0
|
U.S. Department of Defense |
Occupational Safety and Health Administration |
|
29 CFR 1926.602(a)(4) |
SAE J-166 |
1971 |
Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons
|
Society of Automotive Engineers |
Mine Safety and Health Administration |
|
30 CFR 75.1730(a) |
ASME B&PV Code |
1971 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(9) |
SAE J-320a |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers
|
Society of Automotive Engineers |
National Highway Traffic Safety Administration |
|
49 CFR 571.301 S7.1.1 |
ASTM D484 |
1971 |
Standard Specifications for Hydrocarbon Dry Cleaning Solvent
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.951(a)(1)(i) |
ANSI J6.7 |
1971 |
Rubber Matting for Use Around Electrical Apparatus
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (3) |
EPA Method 218.1 |
1971 |
Chromium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(17) |
ANSI J6.1 |
1971 |
Rubber Insulating Line Hose
|
American National Standards Institute |
Coast Guard |
|
46 CFR 153.4(b) |
ANSI B16.31 |
1971 |
Non-Ferrous Pipe Flanges
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60.1810(a)(4) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 62.14104(b) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.602(a)(4) |
SAE J-236 |
1971 |
Minimum Performance Criteria for Brake Systems for Rubber Tire Self-Propelled Graders
|
Society of Automotive Engineers |
Consumer Product Safety Commission |
|
16 CFR 1616.5(a)(9) Footnote 3 |
ASTM D2654 |
1971 |
Method of Test for Amount of Moisture in Textile Materials
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.951(a)(2) |
ANSI Z89.2 |
1971 |
Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B
|
American National Standards Institute |
National Highway Traffic Safety Administration |
|
49 CFR 572.21(d) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 101, 17.0(9) |
ASTM D2928 |
1971 |
Standard Method for Sampling Stacks for Particulate Matter
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(18) |
ANSI J6.2 |
1971 |
Rubber Insulating Hoods
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(3) |
ANSI A11.1 |
1970 |
Practice for Industrial Lighting
|
American National Standards Institute |