This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 154.106(d)(4) | ASTM F 1122 | 1992 | Standard Specification for Quick Disconnect Couplings | ASTM International | |
Coast Guard | 46 CFR 113.37-10(b) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 133.70(c)(2)(i) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(10)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM A 276 | 1998 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 46 CFR 58.50-5 Table 58.50-5(a) | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International | |
Coast Guard | 21 CFR 145.135(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 199.176(a)(4) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 54.25-10(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(12) | IEC 60079-11 | 1999 | Electrical Apparatus for Explosive Gas Atmospheres—Part 11: Intrinsic Safety “i”, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 21 CFR 131.112(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 199.261(g) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 33 CFR 126.15(b)(5) | NFPA 30 | 1996 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Coast Guard | 33 CFR 157.02(b)(2) | IMO Resolution A.496(XII) | 1981 | Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 95.10-10(n)(3) | FedSpec ZZ-H-451E | 1984 | Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.076-7(b) | UL 1180 | 1995 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.10-1(g)(26) | IEC 60092-502 | 1999 | Electrical Installation in Ships, Part 502: Tankers—Special Features | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Ft) in Length | American Bureau of Shipping | |
Coast Guard | 46 CFR 199.175(b)(28)(i) | ASTM F 1003 | 1992 | Standard Specification for Searchlights on Motor Lifeboats | ASTM International | |
Coast Guard | 36 CFR 1235.4(e)(4) | ISO/IEC 15307 | 1997 | Information Technology--Data Interchange on 12.7 mm 128-track Magnetic Tape Cartridges--DLT 4 Format | International Organization for Standardization / International Electrotechnical Commission | |
Coast Guard | 46 CFR 161.002-4(b)(3) | Lloyd's Publication | 1998 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 114.600(b) | UL 1058 | 1994 | Halogenated Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 147.45(f)(5) | UL 30 | 1987 | Standard for Metal Safety Cans | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 174.100(e)(3) | ASTM F 1196 | 2000 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Coast Guard | 42 CFR 37.43 | NCRP Report No. 33 | 1968 | Medical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use | National Council on Radiation Protection and Measurement | |
Coast Guard | 29 CFR 1915.155(b)(1)(ii) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 21 CFR 155.3(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.002-4(f) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.026-3(b) | MIL-E-15090 | 1997 | Enamel, Equipment, Light Gray (Formula No. 111) | U.S. Department of Defense | |
Coast Guard | 46 CFR 59.10-5(i) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.055-1(b) | Drawing No. 160.055-1B, Sheet 2 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 63 | U.S. Coast Guard | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC H-25 | 1994 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-11(a)(5)(i) | Federal Standard 191 | 1978 | Method 5804.1, Weathering Resistance of Cloth: Accelerated Weathering Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.105-39(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 21 CFR 172.785(b)(2) | FDA Publication | 2001 | Method to Determine Lytic Activity/Phage Titer | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 97.36-1(a) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Coast Guard | 46 CFR 160.115-15(e)(1) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 169.529(s) | Standard Color Reference of America | 2012 | Indian Orange, Cable No. 70072 | Textile Color Association of the United States | |
Coast Guard | 46 CFR 160.135-5(d)(1) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(k) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 33 CFR 140.7(b) | ANSI Z41 | 1983 | Protective Footwear | American National Standards Institute | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 160.151-15(f) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(d)(5) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 46 CFR 160.176-4(b)(3) | Federal Standard 191A | 1978 | Method 5134, Strength of Cloth, Tearing: Tongue Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.170-5(b)(4) | ASTM A 314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IE (5) | ASTM D 3454 | 1991 | Standard Test Method for Radium-226 in Water | ASTM International | |
Coast Guard | 46 CFR 162.060-26(d) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 96.130(b) | IMO Resolution A.788(19) | 1995 | Guidelines on Implementation of the International Safety Management (ISM) Code by Administrations | International Maritime Organization |