This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 571.201 S5.2.2 | SAE J-977 | 1966 | Instrumentation for Laboratory Impact Tests | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.13030(c) | ASME B&PV Code | 1977 | Boiler and Pressure Vessel Code, Sections I-VII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.600(b) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.35(b)(2)(i) | Drawing No. 78051-47 | 1987 | Upper leg assembly, right | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (67) | APHA Method 6640 B | 2001 | Chlorinated Phenoxy Herbicides by Liquid-Liquid and GC/ECD | American Public Health Association | |
Federal Trade Commission | 16 CFR 306.0(b) | ASTM D 2699 | 1992 | Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 24 | 2013 | Outside Protection | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 58 Appendix G, 13 | EPA-454-B-02-002 | 2002 | Data Quality Objectives (DQOs) For Relating Federal Reference Method (FRM) and Continuous PM 2.5 Measurements to Report an Air Quality Index (AQI), Eberly, S., T. Fitz-Simons, T. Hanley, et al. | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.902(l)(7)(iv) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Food and Drug Administration | 21 CFR 184.1408(b)(1) | AOAC Journal | 1982 | AOAC Methods 19.CO1 through 19.CO4 | AOAC International | |
Food and Drug Administration | 21 CFR 701.3(c)(2)(iv) | Food Chemicals Codex | 1975 | Food Chemicals Codex, Second Supplement | National Academy Press | |
Labor Department | 41 CFR 50-204.65 | 49 CFR 178 | 2012 | Specifications for Packagings | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (75) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.74(a) | APHA Standard Methods | 1994 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-995b | 2013 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.3 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 F | 1992 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(b)(4) | ASTM D 445 | 2012 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) | ASTM International | |
Environmental Protection Agency | 40 CFR 435.41(r) | MARPOL 73/78 | 2015 | Annexes to MARPOL 73/78 | Lloyd's Register of Shipping | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 2, (4)(c) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.72(a)(6) | ANSI A14.1 | 1975 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.397(a)(8)(i) | RUS Bulletin 345-50, PE-60 | 1979 | RUS Specification for Trunk Carrier Systems | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(xx) | USGS Publication | 1975 | Water Temperature--Influential Factors, Field Measurement and Data Presentation, by H.H. Stevens, Jr., J. Ficke, and G.F. Smoot, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 1, Chapter D1 | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9070A | 2004 | See Method 1664, Publication No. EPA-821-R-98-002 | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Average Heat Release Rate | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
Coast Guard | 46 CFR 56.30-20(d) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A6 | 1989 | Method for the Determination of Oil-Type Preservatives and Water in Wood | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 147.1900(b)(1) | ORUIC regulations | 2014 | Oregon Revised Statutes, Chapter 183 (1987); 192.420, 192.500, 459.460(3), 468.005 through 468.605, and 468.780 through 468.997; Chapters 516 and 522 (1983) | State of Oregon | |
Occupational Safety and Health Administration | 29 CFR 1910.6(y)(3) | ISO 10156:1996 (E) | 1996 | Gases and Gas Mixtures—Determination of Fire Potential and Oxidizing Ability for the Selection of Cylinder Valve Outlets, Second Edition | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 841 | 1990 | Installation of Interior Lathing and Furring | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-ClO2 E | 2014 | Chlorine Dioxide, Amperometric Method II | American Public Health Association | |
Coast Guard | 40 CFR 60.261(q) High-carbon ferrochrome | ASTM A 101 | 1973 | Standard Specification for Ferrochromium | ASTM International | |
Environmental Protection Agency | 40 CFR 98.6 Special naphthas | ASTM D 1836 | 2007 | Standard Specification for Commercial Hexanes | ASTM International | |
Coast Guard | 46 CFR 58.25-60 | IMO Publication A.467(XII) | 1981 | Guidelines for Acceptance of Non-Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-27(c)(2) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.710 Table 2 | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(xv) | EPA Method 1682 | 2006 | Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium. EPA 821-R-06-014 | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 135.130(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(i) | API MPMS | 2002 | Chapter 4, Section 8 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Propachlor) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.715(c) | UL 181A | 1994 | Standard for Safety Closure Systems for use with Rigid Air Ducts and Air Connectors with 1998 revisions | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.4 | APHA Method 601 | 2015 | Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere | American Public Health Association | |
Food and Drug Administration | 21 CFR 102.23(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 21 CFR 131.112(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.2.3 | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Federal Communications Commission | 47 CFR 76.602(b)(6) | CEA-931-A | 2003 | Remote Control Command Pass-through Standard for Home Networking | Consumer Technology Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(19) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Coast Guard | 46 CFR 129.340(d)(1) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.122(a) | Drawing No. 127-0000 | 1987 | Technical drawings and specifications package | Reprographic Technologies |