This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(8) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(73) | ISO 10432:2004 | 2004 | Specification for Subsurface Safety Valve Equipment | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(38) | API MPMS | 2002 | Chapter 10—Sediment and Water, Section 9—Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(f)(5) | 2017 ASME Boiler and Pressure Vessel Code | 2017 | Section VIII, Rules for Construction of Pressure Vessels; Division 3: Alternative Rules for Construction of High Pressure Vessels | American Society of Mechanical Engineers |
Safety and Environmental Enforcement Bureau | 30 CFR 250.850 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(9) | ASTM C 150 | 2007 | Standard Specification for Portland Cement | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(1) | ACI 318 | 1995 | Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(2) | ASTM C 94/C 94M | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(m)(1) | ISO/IEC 17011 | 2005 | Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies, First edition | International Organization for Standardization / International Electrotechnical Commission | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(54) | API MPMS | 1993 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 1—Electronic Gas Measurement | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.292 (j) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Flow schematics and Safety Analysis Function Evaluation (SAFE) charts | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(48) | API RP 2D | 2007 | Recommended Practice for Operation and Maintenance of Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(24) | NACE RP-0176 | 2003 | Standard Recommended Practice for Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production | National Association of Corrosion Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(6) | API Bulletin 92L | 2015 | Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(70) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(4) | ANSI/ASME B16.5 | 2003 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(11) | API RP 2SK | 2005 | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(i) | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(28) | API MPMS | 2003 | Chapter 9, Section 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(22) | API MPMS | 2005 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(86) | ANSI/API Spec. 11D1 | 2009 | Packers and Bridge Plugs | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.833 | API Spec. 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ISO 13628-2:2006 | 2006 | Petroleum and natural gas industries—Design and operation of subsea production systems—Part 2: Unbonded flexible pipe systems for subsea and marine application | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(39) | API MPMS | 1980 | Chapter 11.1—Volume Correction Factors, Volume 1, Table 5A—Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 °F, and Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Grav... | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(1) | ASTM C 33-07 | 2007 | Standard Specification for Concrete Aggregates | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.851(a)(1)(i) | ANSI/ASME BPVC | 2019 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(37) | API MPMS | 2002 | Chapter 12, Section 2, Part 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(1) | ACI 318 | 1995 | Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(16) | ASTM C 94/C 94M | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(n)(1) | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(1) | ACI Standard 318-95 | 1995 | Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(55) | API MPMS | 1998 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(46) | API MPMS | 2005 | Chapter 21, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(k)(2) | NACE RP-0176 | 2003 | Standard Recommended Practice for Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production | National Association of Corrosion Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(7) | API MPMS | 1994 | Chapter 1—Vocabulary | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(71) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(ii) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b)(1) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(29) | API MPMS | 2007 | Chapter 10, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(23) | API MPMS | 2005 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(87) | ANSI/API Spec. 14A | 2005 | Specification for Subsurface Safety Valve Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(88) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |