| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(a) |
EPA Method 1631E |
2015 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, Revision E
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 435.11(hh) |
EPA Method 1617 |
2015 |
Static Sheen Test
|
U.S. Environmental Protection Agency |
| Consumer Product Safety Commission |
|
16 CFR 1201.4 |
ANSI Z97.1 |
2015 |
American National Standard for Safety Glazing Materials Used in Building—Safety Performance Specifications and Methods of Test
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 435.43 Note 2 |
EPA Method 1617 |
2015 |
Static Sheen Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
CSA IR–1–15 |
2015 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
Canadian Standards Association |
| Nuclear Regulatory Commission |
85 FR 26540 |
10 CFR 50 |
ASME BPVC CC N-729-6 |
2015 |
American Society of Mechanical Engineers 2015-2017 Code Editions Incorporation by Reference
|
American Society of Mechanical Engineers |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
UL 2556 2015 |
2015 |
Update to Electrical Engineering Regulations
|
Underwriters Laboratories, Inc. |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.1.NC-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 11(a) |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASTM D5364 |
2015 |
Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
|
ASTM International |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ANSI Z21.22–2015 |
2015 |
Updates to Marine Engineering Standards
|
American National Standards Institute |
| Transportation Department |
85 FR 27810 |
49 CFR 176 |
ISO 22434:2006(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 21172–1:2015/Amd 1:2018(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
85 FR 27810 |
49 CFR 172 |
ISO 17871:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.IX-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Energy Department |
87 FR 50396 |
10 CFR 429 |
ANSI/AMCA Standard 230-15 |
2015 |
Energy Conservation Program: Test Procedure for Ceiling Fans
|
Air Movement and Control Association |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASTM B43–15 |
2015 |
Updates to Marine Engineering Standards
|
ASTM International |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
IEC 60079-5:2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEEE C37.13-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 272, Subpart ZZ |
WYHWMP |
2015 |
State of Wyoming Hazardous Waste Management Program (Reserved)
|
State of Wyoming |
| Transportation Department |
89 FR 25434 |
49 CFR 176 |
OECD Test No. 439 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
Organization for Economic Cooperation and Development |
| Environmental Protection Agency |
|
40 CFR 435.11(e) |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
86 FR 15587 |
40 CFR 82 |
SAE J3030-2015 |
2015 |
Protection of the Stratospheric Ozone: Motor Vehicle Air Conditioning System Servicing
|
Society of Automotive Engineers |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
ANSI/ISA 12.12.01-2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEC 60079-6:2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Interior Department |
89 FR 25378 |
43 CFR 3160 |
API MPMS 22.3 |
2015 |
Waste Prevention, Production Subject to Royalties, and Resource Conservation
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 435.43 Note 4 |
EPA Method 1619 |
2015 |
Suspended Particulate Phase (SPP) Toxicity Test
|
U.S. Environmental Protection Agency |
| Energy Department |
85 FR 56475 |
10 CFR 429 and 430 |
ANSI C82.1-2004 (R2015) |
2015 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ISWA IWS-089 |
2015 |
Insect Wire Screening (Wire Fabric)
|
Insect Screening Weavers Association |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1066 |
CSA IR–1–15 |
2015 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
Canadian Standards Association |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASME B36.10M–2015 |
2015 |
Updates to Marine Engineering Standards
|
American Society of Mechanical Engineers |
| Transportation Department |
85 FR 27810 |
49 CFR 180 |
ISO 11118:2015 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Federal Trade Commission |
91 FR 20788 |
16 CFR 460.5 (e)(2)(vii) |
ASTM C1224-15 |
2015 |
Standard Specification for Reflective Insulation for Building Applications
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 265.195(f)(2) Note |
API 1632 |
2015 |
Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems
|
American Petroleum Institute |
| Federal Communications Commission |
88 FR 67108 |
47 CFR 2 |
IEEE/ANSI C63.26-2015 |
2015 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
Institute of Electrical and Electronics Engineers |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.1.ND-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 80.1426(f)(7)(v)(B) |
ASTM D4442 |
2015 |
Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
|
ASTM International |
| Transportation Department |
85 FR 27810 |
49 CFR 173 |
UN Manual of Tests and Criteria Rev. 6/Amend. 1 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
United Nations |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
IEEE C37.13-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Transportation Department |
85 FR 27810 |
49 CFR 172 |
ISO 21172-1:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(viii)(A) |
AASHTO LTS-6-I1 |
2015 |
Interim Revisions to Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
|
American Association of State Highway and Transportation Officials |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.1.4 |
APHA Method 601 |
2015 |
Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere
|
American Public Health Association |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.X-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Energy Department |
87 FR 50396 |
10 CFR 430 |
ANSI/ AMCA Standard 230-15 |
2015 |
Energy Conservation Program: Test Procedure for Ceiling Fans
|
Air Movement and Control Association |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
IEC 60079-6:2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEEE C37.14-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 435.41(q) |
EPA Method 1655 |
2015 |
Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS)
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEC 60079-7:2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Interior Department |
89 FR 25378 |
43 CFR 3170 |
API 22.3 |
2015 |
Waste Prevention, Production Subject to Royalties, and Resource Conservation
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63.14(k)(12) |
Alaska Statute 42.45.045 |
2015 |
Renewable energy grant fund and recommendation program
|
State of Alaska |