This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 9 | RSILR Publication | 1982 | Determination of Ra-226 and Ra-228 (Ra-02) | State of New York (NY) | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (64) | EPA Method 120.1 | 1982 | Conductance (Specific Conductance, umhos at 25 degrees C) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.100-18(c) | AAR Publication | 1982 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix W | Association of American Railroads | |
Food and Drug Administration | 21 CFR 177.1520(d)(2)(i) | ASTM D 2117 | 1982 | Standard Test Method for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 5 | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (104) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(11)(iii) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 971 | 1982 | Duct-work Insulation | ASTM International | |
Food and Drug Administration | 21 CFR 172.280(a) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Food and Drug Administration | 21 CFR 172.210(b)(2) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (25) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (51) | EPA Method 606 | 1982 | Phthalate Esters by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2500(a)(2) | WIUIC regulations | 1982 | Chapter NR 112, Well Construction and Pump Installation, Wisconsin Administrative Code §§ NR 112.03 and 112.20 (October 1981), as amended by Natural Resources Board Order No. WQ-25-82, approved by the Natural Resources Board on August 25, 1982 | State of Wisconsin | |
Research and Special Programs Administration | 21 CFR 176.170(b)(2) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (89) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.105(b)(2) | FDA Publication | 1982 | Low Molecular Weight Anoxomer Analysis | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (107) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154, Appendix A, 3.1 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (41) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (77) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 21 CFR 178.3690(b)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154, Appendix B, 8.6 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.926a(c)(5) | ANSI A58.1 | 1982 | Building Code Requirements for Minimum Design Loads in Buildings and Other Structures | American National Standards Institute | |
Food and Drug Administration | 21 CFR 177.1350(b)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Rural Utilities Service | 21 CFR 176.170(a)(5) | ASTM D 611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (23) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(3) | N.B.S. Special Publication 619 | 1982 | Asbestos Standards: Materials and Analytical Methods, Small, John and E. Steel | National Institute of Standards and Technology, U.S. Department of Commerce | |
Food and Drug Administration | 21 CFR 178.2010(b) | ASTM D 1218 | 1982 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1520(d)(2)(ii) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 5 | EPA Method 605 | 1982 | Benzidines by HPLC | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (104) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(11)(iii) Footnote 2 | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.215(b)(1) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (10) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 175.300(b)(3)(xxxiii) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (51) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (74) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2500(a)(3) | WIUIC regulations | 1982 | Chapter NR 113, Servicing Septic Tanks, Seepage Pits, Grease Traps or Privies, Wisconsin Administrative Code §§ NR 113.07-113.08 (1979), as amended by Natural Resources Board Order No. WQ-25-82. | State of Wisconsin | |
Food and Drug Administration | 21 CFR 178.3620(c)(1)(ii) | ASTM D 1500 | 1982 | Standard Method of Test for ASTM Color of Petroleum Products (ASTM Color Scale) | ASTM International | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 785.17(c)(1) | USDA Handbook 18 | 1982 | Soil Survey Manual | Soil Conservation Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 300.915(c)(11) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.945(a)(2) | AATCC 16E | 1982 | Colorfastness to Light: Water-Cooled Xenon-Arc Lamp, Continuous Light | American Association of Textile Chemists and Colorists | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (3) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency |