This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.36(h) | Drawing No. 78051-46 | 1987 | Upper leg assembly, left | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 572.113 | Drawing No. 78051-84 | 1987 | Neck Assembly, SID 50th Percentile Male | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 572.126(b) | Drawing No. 127-4007 | 1987 | Structural replacement | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.153(c)(2) | Drawing No. ATD 6206 | 1987 | Neck cable | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.173(c)(2) | Drawing No. 9000130 | 1987 | Hex Nut | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910.269(v)(3) Note | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.142(a) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 177.1030(c)(2) | FDA Publication | 1987 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 182.130 | ABYC H-32 | 1987 | Ventilation of Boats Using Diesel Fuel | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) | ASTM E711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/HPMA LHF | 1987 | Laminated Hardwood Flooring | Hardwood Plywood Manufacturers Association | |
Coast Guard | 46 CFR 56.01-2(k)(13) | MSS SP-72 | 1987 | Ball Valves with Flanged or Butt-Welding Ends for General Service | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 7 | ASTM D2724 | 1987 | Standard Test Method for Bonded, Fused, and Laminated Apparel Fabrics | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(v) | ASTM A505 | 1987 | Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.33(c)(2) | Drawing No. 78051-301 | 1987 | Title not specified | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 572.133(b) | Drawing No. 880105-100X | 1987 | Head Assembly | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. 127-1000 | 1987 | Head Assembly | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.146(e) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 261.1063(d)(1) | ASTM E169 | 1987 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Food and Drug Administration | 21 CFR 177.1390(c)(3)(i)(A)(1) | FDA Publication | 1987 | Determination of Non-Volative Chloroform Soluble Residues in Retort Pouch Water Extractives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 300.915(f)(9) | ASTM D97 | 1987 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.1M | 1987 | Enameled Cast Iron Plumbing Fixtures | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 183.540(a)(2) | UL 1114 | 1987 | Marine (USCG Type A) Flexible Fuel Line Hose | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(i) | Drawing No. 78051-13 | 1987 | Pelvic bone instrument cover plate | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 147.1450(a)(3) | NVUIC regulations | 1987 | Nevada Revised Statutes [NRS], Volume 28, Chapters 522.010 through 522.190, Inclusive | State of Nevada | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-528R | 1987 | Sliding knee assembly, right | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.146(j) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.142(a) | Drawing No. SA-572-S80 | 1987 | Accelerometer Mounting Block | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.2) | EPA Method 9020 | 1987 | Test Methods for Evaluating Solid Waste | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 157.450 | IMO Resolution A.601(15) | 1987 | Provision and Display of Maneuvering Information on Board Ships | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.1 | 1987 | Plastic Bathtub Units with Addenda Z124.1A-1990 and Z124.16-1991 | American National Standards Institute | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A197 | 1987 | Standard Specification for Cupola Malleable Iron | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.36(h) | Drawing No. 78051-47 | 1987 | Upper leg assembly, right | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 572.137(i) | Drawing No. SA-572-S14 | 1987 | Femur load transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 763.90(i)(5) | NIOSH Analytic Method 7400 | 1987 | NIOSH Manual of Analytic Methods, Fibers | National Institute for Occupational Safety and Health | |
National Highway Traffic Safety Administration | 49 CFR 572.127(c) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.155(b) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.143(a) | Drawing No. SA-572-S19 | 1987 | Load-moment Transducer | Reprographic Technologies | |
Housing and Urban Development Department | 24 CFR 200.945(a)(2) | ASTM D2646 | 1987 | Standard Test Method for Backing Fabrics | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D3173 | 1987 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 129.340(d)(1) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 75.6(c)(1) | ISO 8316:1987(E) | 1987 | Measurement of Liquid Flow in Closed Conduits-Method by Collection of the Liquid in a Volumetric Tank | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 572.127(h) | Drawing No. 127-0000 | 1987 | Technical drawings and specifications package | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 177.1030(d)(2) | FDA Publication | 1987 | Extracted Acrylonitrile Monomer by Differential Pulse Polarography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 33 CFR 154.106(b)(1) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(v) | ASTM B193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.34(c)(3) | Drawing No. 78051-64 | 1987 | Title not specified | General Motors Corporation | |
Energy Department | 87 FR 75144 | 10 CFR 429 | ANSI/ASHRAE 41.2-1987 (RA 92) | 1987 | Energy Conservation Program: Test Procedure for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps | American Society of Heating, Refrigerating and Air Conditioning Engineers |
National Highway Traffic Safety Administration | 49 CFR 572.133(b) | Drawing No. 880105-250 | 1987 | Neck Assembly | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. 127-1015 | 1987 | Neck Assembly | Reprographic Technologies |