This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 61, Appendix D, Purpose and Background | EPA-520-1-89-002 | 1989 | A Guide for Determining Compliance with the Clean Air Act Standards for Radionuclides Emissions from NRC-Licensed and Non-DOE Federal Facilities | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52.741(q)(1)(i)(C) | 35 I.A.C. 215 | 1989 | Administrative Code, Sections 215.584(b) or (d) | State of Illinois | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | USGS I-2700-85 | 1989 | Silica, colorimetric, molybdate blue, automated-segmented flow | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.111(b) | ASTM D396 | 1989 | Standard Specification for Fuel Oils | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(j)(3)(ii) | ASTM D1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Housing and Urban Development Department | 24 CFR 201.21(c)(3) | HUD Handbook 4930.3 | 1989 | Permanent Foundations Guide for Manufactured Housing | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Section (2) | SAE J-1989 | 1989 | Recommended Service Procedure for the Containment of R-12 | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 260.11(e)(1) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Energy Department | 10 CFR 434.403.2.8.1(b) | ASHRAE 62 | 1989 | Ventilation for Acceptable Indoor Air Quality (RS-41) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 89.327 | SAE J-1937 | 1989 | Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(xv) | USGS Publication | 1989 | Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, by M.J. Fishman and Linda C. Friedman, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1 | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.4 | ASTM D4891 | 1989 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA | USGS B-0050-85 | 1989 | Membrane Filtration Quantitative: Fecal Coliform | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 177.1810(c)(2)(ii) | FDA Publication | 1989 | Direct Reading Viscoelastometric Method for Determining Class Transition Points of Styrene Block Polymers | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 75.6(b)(1) | ASME MFC-3M | 1989 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 57.06-1(c) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 59.208(g)(2) | SCAQMD Method 25.1 | 1989 | Determination of Total Gaseous Non-Methane Organic Emissions as Carbon | South Coast Air Quality Management District | |
Coast Guard | 46 CFR 108.101(b) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 52.741(w)(1)(i) | 35 I.A.C. 215, Subpart S | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 52.741(a)(2)(iii)(A) | 35 I.A.C. 211 | 1989 | Definitions and General Provisions | State of Illinois | |
Public Health Service | 42 CFR 37.10(e)(1) | NCRP Report No. 102 | 1989 | Medical X-ray, Electron Beam, and Gamma-Ray Protection for Energies Up to 50 MeV (Equipment Design, Performance, and Use) | National Council on Radiation Protection and Measurement | |
Environmental Protection Agency | 40 CFR 147.2250(a)(1) | UTUIC regulations | 1989 | Utah Water Pollution Control Act, Utah Code Annotated, Title 26, Chapter 11, Sections 2, 8, and 10 (1989) | State of Utah | |
Environmental Protection Agency | 40 CFR 63.7944(b)(2)(iii) | API 2517 | 1989 | Evaporative Loss from External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 177.2450(b)(3) | FDA Publication | 1989 | Amide-Imide Polymer Content--Analysis of Monomer Content | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.055-3(h)(1) | MIL-W-17337D | 1989 | Webbing, Woven, Nylon | U.S. Department of Defense | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(iii) | AOCS Method Cd 3-25 | 1989 | Saponification Value | American Oil Chemists Society | |
Occupational Safety and Health Administration | 29 CFR 1917.91(a)(1)(i)(C) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (6) | USGS B-0055-85 | 1989 | Membrane Filtration Quantitative: Fecal Streptococci | U.S. Geological Survey | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/AAMA 1102.7 | 1989 | Voluntary Specifications for Aluminum Storm Doors | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(39) | ASTM D396 | 1989 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 21 CFR 173.357(a)(2) | FDA Publication | 1989 | Methodology for Ethylene-dichloride Detection in Polyethylenimine | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 60.111a(b) Petroleum liquids | ASTM D396 | 1989 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 182.460(m) | ABYC H-2 | 1989 | Ventilation of Boats Using Gasoline | American Boat and Yacht Council | |
Housing and Urban Development Department | 24 CFR 3280.703 | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 63.782, Nuclear specialty coating | ASTM D4256 | 1989 | Standard Test Method for Determination of the Decontaminability of Coatings Used in Light-Water Nuclear Power Plants | ASTM International | |
Coast Guard | 46 CFR 182.445(f) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 76.15(a)(1) | ASTM D3176 | 1989 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 59.412(b)(2) | ASTM D523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.135(b)(2) | ANSI Z89.1 | 1989 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.24(h)(13)(iii) | EPA Method 508a | 1989 | Screening for Polychlorinated Bipheyles by Perchlorination and Gas Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52.742(d) | 35 I.A.C. 215, Subpart R | 1989 | Administrative Code, Excluding sections 215.447, 215.450, and 215.452 | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.870(b)(5)(i) | ASTM D1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-41 | ASHRAE 62 | 1989 | Ventilation for Acceptable Indoor Air Quality (RS-41) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.19 Table 1 | ASTM D2234 | 1989 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Rural Utilities Service | 7 CFR 1755.902(r)(15)(iv)(A) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association | |
National Highway Traffic Safety Administration | 21 CFR 177.1550(d)(2)(ii) | FDA Publication | 1989 | Determination of Melt Viscosity, Molecular Weight Distribution Index and Viscosity Stability | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 52.741(q)(1)(vi)(B) | 35 I.A.C. 215 | 1989 | Administrative Code, Section 215(a)(2) | State of Illinois | |
Coast Guard | 46 CFR 182.420(b) | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (PCBs (as decachlorobiphenyl)) | EPA Method 508a | 1989 | Screening for Polychlorinated Bipheyles by Perchlorination and Gas Chromatography | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.860(j)(3)(iii) | ASTM D1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International |