This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(13)(iii) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 175.600(b) Table | UL 595 | 1991 | Marine Type Electric Lighting Fixtures | Underwriters Laboratories, Inc. | |
Rural Utilities Service | 7 CFR 1755.910(d)(3)(xv) | ASTM A525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 12, Section 7.1.3 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.1810(a)(3) | ASME PTC 4.1 | 1991 | Power Test Codes: Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.19 Table 2 | ASTM D3302 | 1991 | Standard Test Method for Total Moisture in Coal | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-10 | ASTM E283 | 1991 | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (RS-10) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(160) | ASTM D4457 | 1991 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(58) | ASTM D5066 | 1991 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(6)(v) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.1.2 | 1991 | Air Gaps in Plumbing Systems | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(iv) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus—P2O5 or Ca3(PO4)2, Method C—Spectrophotometric Method | Association of Florida Phosphate Chemists | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(v) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method A—Volumetric Method | Association of Florida Phosphate Chemists | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | UL All Standards | 1991 | All specifications, standards and codes without specific reference | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108B, 7.1.1 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C834 | 1991 | Latex Sealants | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 34 | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 3.1 | SAE J-1991 | 1991 | Standard of Purity for Use in Mobile Air-Conditioning Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Environmental Protection Agency | 40 CFR 91.207(a) | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.708(c)(2) | ISO 535 | 1991 | Paper and Board--Determination of Water Absorptiveness--Cobb Method | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 58 Appendix C, 6.0(2) | EPA-600-8-91-215 | 1991 | Technical Assistance Document For Sampling and Analysis of Ozone Precursors | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.206 S5.1.1.4(a) | SAE J-839 | 1991 | Passenger Car Side Door Latch System | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(29) | ASTM D2908 | 1991 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430.32(n)(2)(ii) | ANSI C78.3 | 1991 | American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 587.6(b) | Drawing No. DSL-1290 | 1991 | Side Impact Moving Deformable Barrier Drawings | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 7.2.2 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(ii) | EPA Method 200.8 | 1991 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D3649 | 1991 | Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1329(c)(2)(i) | ASTM D2908 | 1991 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(f)(1) | SPIB Publication | 1991 | Special Product Rules for Structural, Industrial, and Railroad-Freight Car Lumber | Southern Pine Inspection Bureau | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | AGA Report No. 3, Part 2 | 1991 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D257 | 1991 | Standard Test Method for DC Resistance of Conductance of Insulating Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(i) | ASTM D388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(30)(i) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Food and Drug Administration | 21 CFR 177.2600(c)(4)(i) | PRC Publication | 1991 | Determination of Residual [alpha],[beta]-Olefinic and Trans Olefinic Unsaturation Levels in HNBR | Polysar Rubber Corp. | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Education Department | 34 CFR 104.23(c)(1) | UFAS | 1991 | Uniform Federal Accessibility Standards | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 13A, Section 7.1.2 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Coast Guard | 46 CFR 183.410(d) | UL 595 | 1991 | Marine-Type Electric Lighting Fixtures | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 238.30(a) | ASTM D3826 | 1991 | Standard Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile Test | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(8)(ii) | EPA-600-4-91-010 | 1991 | Method 200.8--Determination of Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(ix) | ASTM F476 | 1991 | Standard Test Method for Security of Swinging Door Assemblies | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(vi) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF Footnote 1 | EPA Method 1624 C | 1991 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108C, 7.1.1 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Coast Guard | 40 CFR 60, Appendix A-5, Method 13A, Section 16.1 | ASTM D3270 | 1991 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.522(a)(4) | ASTM B33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Federal Trade Commission | 16 CFR 309.10(a) | ASTM D1945 | 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International |