| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Consumer Product Safety Commission |
|
16 CFR 1500.49 (e)(3) |
MIL-I-23594B |
1971 |
Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive
|
Defense Standardization Program, Department of Defense |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(8) |
SAE J-319b |
1971 |
Self-Propelled Scrapers
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(38) |
ANSI J6.4 |
1971 |
Rubber Insulating Blankets
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (2) |
EPA Method 213.1 |
1971 |
Cadmium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(20) |
ANSI J6.5 |
1971 |
Rubber Insulating Sleeves
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(2) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(9) |
SAE J-320a |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(39) |
ANSI J6.6 |
1971 |
Rubber Insulating Gloves
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(21) |
ANSI J6.6 |
1971 |
Rubber Insulating Gloves
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(12) |
SAE J-394 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (57) |
EPA Method 160.4 |
1971 |
Residue, Volatile (Gravimetric, Ignition at 550 degrees C)
|
U.S. Environmental Protection Agency |
| Federal Aviation Administration |
|
14 CFR 152.11(a) |
150/5345-39A |
1971 |
Runway and Taxiway Retroreflective Markers
|
Federal Aviation Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(22) |
ANSI J6.7 |
1971 |
Rubber Matting for Use Around Electric Apparatus
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.023-1(a)(1) |
MIL-S-18655C |
1971 |
Signal, Smoke and Illumination, Marine, Mark 13, Mod 0.
|
U.S. Department of Defense |
| Rural Utilities Service |
|
7 CFR 1755.97(b)(3) |
RUS Bulletin 345-54, PE-52 |
1971 |
Specification for Telephone Cable Splicing Connectors
|
Rural Utilities Service, U.S. Department of Agriculture |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5335-3 |
1971 |
Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports
|
Federal Aviation Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1917.42(h)(1) |
ANSI B30.9 |
1971 |
Standard for Slings
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 101, 17.0(9) |
ASTM D2928 |
1971 |
Standard Method for Sampling Stacks for Particulate Matter
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec HH-I-529B |
1971 |
Insulation Board, Thermal (Mineral Aggregate)
|
Federal Specifications Standards and Test Methods |
| Mine Safety and Health Administration |
|
30 CFR 75.1107-17 |
NFPA 22 |
1971 |
Standard for Water Tanks for Private Fire Protection
|
National Fire Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(a)(16) |
RUS Bulletin 50-60 (T-9) |
1971 |
RUS Specification for Single Pole Steel Structures Complete with Arms
|
Rural Utilities Service, U.S. Department of Agriculture |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(25)(i) |
NCASI Technical Bulletin 253 |
1971 |
An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (6) |
EPA Method 239.1 |
1971 |
Lead (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 153.4(b) |
ANSI B16.31 |
1971 |
Non-Ferrous Pipe Flanges
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(B) |
EPA Method 130.1 |
1971 |
Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(Q) |
EPA Method 352.1 |
1971 |
Nitrogen, Nitrate, Colorimetric, Brucine
|
U.S. Environmental Protection Agency |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-44A |
1971 |
Specification for L-858 Retroreflective Taxiway Guidance Sign
|
Federal Aviation Administration, U.S. Department of Transportation |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec TT-P-791B |
1971 |
Putty
|
Federal Specifications Standards and Test Methods |
| Federal Trade Commission |
|
16 CFR 460.5(e)(2)(i) |
FedSpec HH-I-530A |
1971 |
Insulation, Board, Thermal (Urethane)
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (7) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (11) |
EPA Method 289.1 |
1971 |
Zinc (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(13) |
SAE J-395 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders
|
Society of Automotive Engineers |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5340-5A |
1971 |
Segmented Circle Airport Marker System
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (8) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(17) |
ASTM D93 |
1971 |
Test for Flash Point by Pensky Martens Closed Cup Tester
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(50) |
ANSI Z9.1 |
1971 |
Practices for Ventilation and Operation of Open-Surface Tanks
|
American National Standards Institute |
| Federal Railroad Administration |
|
49 CFR 229.51(b) |
ASME B&PV Code |
1971 |
Boiler and Pressure Vessel Code
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (4) |
EPA Method 220.1 |
1971 |
Copper (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(D) |
EPA Method 160.4 |
1971 |
Residue, Volatile (Gravimetric, Ignition at 550 degrees C)
|
U.S. Environmental Protection Agency |
| Mine Safety and Health Administration |
|
30 CFR 75.1107-17 |
NFPA 13A |
1971 |
Care and Maintenance of Sprinkler Systems
|
National Fire Protection Association |
| Coast Guard |
|
29 CFR 1926.6(dd)(14) |
SAE J-396 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(o)(1) |
BOR Publication |
1971 |
Safety and Health Regulations for Construction, Part II
|
Bureau of Reclamation, U.S. Department of Interior |
| Coast Guard |
|
46 CFR 160.040-1(a)(2) |
MIL-R-45505A |
1971 |
Line Throwing Apparatuses, Rocket and Projectile Units
|
U.S. Department of Defense |
| Environmental Protection Agency |
|
40 CFR 147.1851(b)(1) |
OKUIC regulations |
1971 |
Oklahoma Statutes, title 17 sections 51-53; title 52 sections 86.1-86.5, 139-153, 243, 307-318.1
|
State of Oklahoma |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (9) |
EPA Method 272.1 |
1971 |
Silver (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-10C |
1971 |
Specification for L-828 Constant Current Regulators
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 60 |
1970 |
Field Glued Plywood and Wood Frame Structural Floor Systems
|
U.S. Department of Housing and Urban Development |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(24) |
NFPA 101 |
1970 |
Code for Life Safety From Fire in Buildings and Structures
|
National Fire Protection Association |