This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(30) | ASTM A351/A 351M | 1994 | Standard Specification for Castings, Austenitic, Sustenitic-Ferritic (Duplex) for Pressure Containing Parts | ASTM International | |
Federal Communications Commission | 47 CFR 15.118(c)(1) | EIA-IS-132 | 1994 | Cable Television Channel Identification Plan | Electronic Industries Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | EPA SW-846-9076 | 1994 | Test Method for Total Chlorine in New and Used Petroleum Products by Oxidative Combustion and Microcoulometry, Revision 0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | ASTM D1826 | 1994 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M030 | 1994 | Shoulder-thorax assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 30.10-59 | ASTM D323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 33 CFR 155.140(d)(2) | IMO Resolution MSC.35 (63) | 1994 | Adoption of Guidelines for Emergency Towing Arrangement on Tankers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 86.1866-12(b)(2)(ii) | SAE J-1711 | 1994 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) | EPA-600-R-94-111 | 1994 | Methods for Determination of Metals in Environmental Samples—Supplement I | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.21(a)(2)(ii) | Drawing No. SA-572-S2 | 1994 | No title given | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.41(c) | NHTSA Publication | 1994 | Side Impact Dummy (SID) User's Manual | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
National Archives and Records Administration | 36 CFR 1238.5(e)(1) | NAPM IT2.19 | 1994 | American National Standard for Photography--Density Measurements--Part 2: Geometric Conditions for Transmission Density | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.14(l)(5) | EPA SW-846-7470A | 1994 | Mercury In Liquid Waste (Manual Cold-Vapor Technique), Revision 1 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 173.306(e)(1)(v) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Federal Communications Commission | 88 FR 67108 | 47 CFR 73 | EIA-608 | 1994 | Updating References to Standards Related to the Commission's Equipment Authorization Program | Consumer Technology Association |
National Highway Traffic Safety Administration | 49 CFR 572.127(h) | Drawing No. 127-3015-1 | 1994 | Left ASIS load cell | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1037.810(d)(3) | SAE J-2071 | 1994 | Aerodynamic Testing of Road Vehicles—Open Throat Wind Tunnel Adjustment | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(viii) | EPA Method 8031 | 1994 | Acrylonitrile By Gas Chromatography, Revision 0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 92.113 Table B113-1 | ASTM D2622 | 1994 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D4084 | 1994 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 60 | SAE J2071_199406 | 1994 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(D) | EPA Method 218.6 | 1994 | Determination of Dissolved Hexavalent Chromium in Drinking Water, Groundwater, and Industrial Wastewater Effluents by Ion Chromatography. Revision 3.3 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(xii) | ISO 7827:1994(E) | 1994 | Water Quality—Evaluation in an Aqueous Medium of the “Ultimate” Aerobic Biodegradability of Organic Compounds—Method by Analysis of Dissolved Organic Carbon (DOC). Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 121.240(e)(3) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.146(f) | Drawing No. SA-572-S50 | 1994 | Chest Deflection Transducer | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(1)(iii) | ISO 9141-2 | 1994 | Road Vehicles--Diagnostic Systems | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 40 | OIA Method PAI-DK02 | 1994 | Nitrogen Kjeldahl, (Block Digestion, Steam Distillation, Colorimetric Detection) | OI Analytical | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.54b(b) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 62.14105(b) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (cobalt) | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b) Appendix (3) | ASTM Annual Book of Standards | 1994 | ASTM Annual Book of Standards, Vol. 11.01 | ASTM International | |
Coast Guard | 33 CFR 127.201(c)(2) | NFPA 59A | 1994 | Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.10906 Free liquids | EPA Method 9095B | 1994 | Paint Filter Liquids Test, Revision 2 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 114.600(b) | UL 174 | 1994 | Household Electric Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 134.140(a)(4) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Environmental Protection Agency | 89 FR 29440 | 40 CFR 1054 | NIST Technical Note 1297 | 1994 | Greenhouse Gas Emissions Standards for Heavy-Duty Vehicles-Phase 3 | National Institute of Standards and Technology, U.S. Department of Commerce |
Research and Special Programs Administration | 49 CFR 178.56(d)(3) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 272.1201(a)(1)(i) | MNHWMP | 1994 | EPA Approved Minnesota Statutory Requirements Applicable to the Hazardous Waste Management Program | State of Minnesota | |
Occupational Safety and Health Administration | 29 CFR 1926.1423(c)(3)(i) | ISO 11660-2:1994(E) | 1994 | Cranes—Access, guards and restraints—Part 2: Mobile cranes | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 60.17(f)(15) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 170.270(c)(2) | ASTM F1197 | 1994 | Standard Specification for Sliding Watertight Door Control Systems1 | ASTM International |