Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (11) |
APHA Method 3120 B |
1999 |
Metals by Inductively Coupled Plasma
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 98.354(h)(6) |
ASME MFC-14M |
2003 |
Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
|
American Society of Mechanical Engineers |
Consumer Product Safety Commission |
|
16 CFR 1630.4(b)(1)(ii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
|
American Association of Textile Chemists and Colorists |
Coast Guard |
|
46 CFR 164.023-3(b)(5) |
FedSpec V-T-295E |
1985 |
Thread, Nylon
|
Federal Specifications Standards and Test Methods |
Research and Special Programs Administration |
|
49 CFR 178.51(d)(2) |
CGA C-3 |
1994 |
Standard for Welding and Brazing on Thinned Walled Containers
|
Compressed Gas Association |
Environmental Protection Agency |
|
40 CFR 63.772(e)(3)(iv)(C)(1) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
Coast Guard |
|
33 CFR 155, Appendix B, 6.3.1 |
ASTM F631 |
1993 |
Standard Guide for Collecting Skimmer Performance Data in Controlled Environments
|
ASTM International |
Coast Guard |
|
46 CFR 160.002-3(a) |
46 CFR 164.003 |
2012 |
Kapok, Processed
|
U.S. Coast Guard |
Rural Utilities Service |
|
7 CFR 1755.910(e)(3)(vii) |
ASTM G21 |
1990 |
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.11(b) |
NFPA 58 |
2004 |
Standard for the Storage and Handling of Liquefied Petroleum Gases
|
National Fire Protection Association |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(30) |
API MPMS |
2007 |
Chapter 10, Section 2
|
American Petroleum Institute |
Rural Utilities Service |
|
7 CFR 1755.390(k)(3) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 178.338-1(a)(1) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Drug Enforcement Administration |
|
21 CFR 1311.55(b)(2) |
FIPS Publication 180-2 |
2004 |
Secure Hash Standard (SHS) as amended by Change notice 1
|
National Institute of Standards and Technology, U.S. Department of Commerce |
Coast Guard |
|
46 CFR 111.105-15(b) |
NEC 2002 |
2002 |
National Electrical Code Handbook
|
National Fire Protection Association |
National Highway Traffic Safety Administration |
|
49 CFR 572.77(d) |
Drawing No. SA-572-S10 |
1987 |
Force sensing device
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IF (Isopropyl ether) |
EPA Method 1666 |
1998 |
Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 147.2450 |
WVUIC regulatons |
2014 |
(Reserved)
|
State of West Virginia |
Occupational Safety and Health Administration |
|
29 CFR 1926.602(a)(2)(i) |
SAE J-333a |
1970 |
Operation Protection for Wheel-Type Agricultural and Industry Tractors
|
Society of Automotive Engineers |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 1496-3 |
1995 |
Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk
|
International Organization for Standardization |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(e)(2) |
ACI 318R |
1995 |
Commentary on Building Code Requirements for Reinforced Concrete
|
American Concrete Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (98) |
APHA Method 6410 B |
2000 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
APHA Standard Methods, 19th Edition, Supplement |
1996 |
Standard Methods for the Examination of Water and Wastewater. 19th Edition, Supplement
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63.14(g)(47) |
ASTM D4017 |
1996 |
Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method
|
ASTM International |
Coast Guard |
|
46 CFR 182.440 Table 182.440(a)(1) |
ASTM B122/B 122M |
1995 |
Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 |
ASTM D2369 |
1981 |
Standard Test Method of Volatile Content for Coatings
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.152(a) |
Drawing No. 921022-001 |
2001 |
Head Assembly
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 60.41b Distillate oil |
ASTM D396 |
1998 |
Standard Specification for Fuel Oils
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63.8450(e)(1) |
EPA-454/R-98-015 |
1997 |
Fabric Filter Bag Leak Detection Guidance
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 56.01-2(e)(60) |
ASTM B210 |
1995 |
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
|
ASTM International |
Drug Enforcement Administration |
|
21 CFR 1311.120(b)(16)(ii) |
FIPS Publication 180-3 |
2008 |
Secure Hash Standard (SHS)
|
National Institute of Standards and Technology, U.S. Department of Commerce |
Environmental Protection Agency |
|
40 CFR 52, Subpart TT |
UTSIP |
1979 |
State Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of Utah |
Coast Guard |
|
46 CFR 161.002-1(b) |
UL 38 |
1994 |
Standard for Manually Actuated Signaling Boxes for Use with Fire-Protective Signaling Systems
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 266.104(e)(1) |
EPA Method 0023A |
1996 |
Sampling Method for Polychlorinated Dibenzo-p-dioxins and Polychlorinated Dibensofuran Emmissions from Stationary Sources
|
U.S. Environmental Protection Agency |
Research and Special Programs Administration |
|
49 CFR 180.513(a) |
AAR Specification M-1002 |
2000 |
AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars
|
Association of American Railroads |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH (5) |
APHA Method 9213 D |
2007 |
Membrane Filtration Quantitative (mTEC/urea): E. coli (Beachwater only)
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 600.011(b)(2) |
ASTM D1298 |
2012 |
Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1915.507(b)(2) |
NFPA 10 |
2002 |
Standard for Portable Fire Extinguishers
|
National Fire Protection Association |
Coast Guard |
|
46 CFR 56.50-57(a)(2) |
IMO/IMCO Resolution A.265(VIII) |
1973 |
Regulations on Subdivision and Stability of Passenger Ships as Equivalent to part B of chapter II of the International Convention for the Safety of Life at Sea, 1960.
|
International Maritime Organization, Inter-governmental Maritime Consultative Organization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (63) |
USGS I-4471-97 |
1997 |
Metals by Inductively Coupled Plasma
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 6 |
EPA-600-R-93-100 |
1993 |
Methods for Determination of Inorganic Substances in Environmental Samples
|
U.S. Environmental Protection Agency |
Consumer Product Safety Commission |
|
16 CFR 1505.5 Footnote 2 |
NFPA 70 |
1971 |
National Electrical Code
|
National Fire Protection Association |
Coast Guard |
|
33 CFR 104.105(c) |
IMO Conference Resolution 2 |
2002 |
ISPS Code
|
International Maritime Organization |
Coast Guard |
|
46 CFR 160.151-27(c)(4) |
IMO Revised recommendation on testing |
2010 |
Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (5) |
EPA Method 200.9 |
1994 |
Metals by Graphite Atomic Absorption, Revision 2.2
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 136.3(b)(13)(i)(C) |
AOAC Method 973.40 |
1998 |
Specific conductance of water
|
AOAC International |
Environmental Protection Agency |
|
40 CFR 799.5087(h)(1)(xi) |
ISO 14593:1999(E) |
1999 |
Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Method by Analysis of Inorganic Carbon in Sealed Vessels (CO2 Headspace Test). First Edition
|
International Organization for Standardization |
Food and Drug Administration |
|
21 CFR 137.105(c)(4) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Interior Department |
|
43 CFR 11.43 |
DOI NRDAM/GLE |
1999 |
CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation
|
U.S. Department of the Interior |
Environmental Protection Agency |
|
40 CFR 267.190(a) |
EPA SW-846 |
2014 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9095B
|
U.S. Environmental Protection Agency |