Environmental Protection Agency |
|
40 CFR 60.17(g)(94) |
ASTM D2369 |
1995 |
Standard Test Method for Volatile Content of Coatings
|
ASTM International |
Mine Safety and Health Administration |
|
30 CFR 77.901(c) |
NFPA 70 |
2013 |
National Electrical Code
|
National Fire Protection Association |
Coast Guard |
|
46 CFR 160.135-5(b)(8) |
ASTM D638 |
2008 |
Standard Test Method for Tensile Properties of Plastics
|
ASTM International |
Rural Utilities Service |
|
7 CFR 1755.390(g)(1) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
Health and Human Services Department |
|
45 CFR 162.1203(a)(10) |
CAQH Publication |
2011 |
Phase II CORE 270: Connectivity Rule, version 2.2.0
|
Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |
Federal Aviation Administration |
|
14 CFR 152.11(a) |
150/5370-9 |
1973 |
Slip-Form Paving--Portland Cement Concrete
|
Federal Aviation Administration, U.S. Department of Transportation |
Coast Guard |
|
46 CFR 110.10-1(l)(3) |
NFPA 99 |
2005 |
Standard for Health Care Facilities
|
National Fire Protection Association |
National Highway Traffic Safety Administration |
|
49 CFR 572.36(h) |
Drawing No. 78051-46 |
1987 |
Upper leg assembly, left
|
General Motors Corporation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IF (Benzene) |
ASTM D3695 |
1995 |
Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(vi) |
LAUIC regulations |
1984 |
Amendment to Statewide Order No. 29-B (Amendment concerning disposal of nonhazardous oilfield waste) (March 20, 1984, effective May 20, 1984)
|
State of Louisiana |
Occupational Safety and Health Administration |
|
29 CFR 1926.1440(c)(11) |
ASME B30.14, Section 14-3.1.3 |
2004 |
Side Boom Tractors, Operating Practices, paragraphs (e), (f)(1)-(f)(4), (f)(6), (f)(7), (h), and (i)
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (86) |
EPA Method 1613 B |
1997 |
Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.74(a)(2) Table (Total Chlorine) |
ASTM D1253 |
2003 |
Standard Test Method for Residual Chlorine in Water
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 |
ASTM D2015 |
1996 |
Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter
|
ASTM International |
National Highway Traffic Safety Administration |
|
46 CFR 25.45-2(b)(7) |
ABYC A-1 |
1978 |
Marine Liquefied Petroleum Gas Systems
|
American Boat and Yacht Council |
Environmental Protection Agency |
|
40 CFR 75, Appendix G, Section 2.1.2 |
ASTM D2502 |
1996 |
Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements
|
ASTM International |
Surface Mining Reclamation and Enforcement Office |
|
30 CFR 816.49(a)(1) |
USDA Technical Release 210-VI-TR60 |
1985 |
Earth Dams and Reservoirs
|
Soil Conservation Service, U.S. Department of Agriculture |
Coast Guard |
|
46 CFR 113.25-11(a) |
NEMA Publication 250 |
2001 |
Enclosures for Electrical Equipment (1000 Volts Maximum)
|
National Electrical Manufacturers Association |
Environmental Protection Agency |
|
40 CFR 52, Subpart O |
ILSIP |
1979 |
State Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of Illinois |
Environmental Protection Agency |
|
40 CFR 60.296(b)(3) |
ASTM D240 |
1992 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 264.1063(d)(1) |
ASTM E168 |
1988 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(j)(1) |
AWS B3.0 |
1972 |
Standard Qualification Procedure
|
American Welding Society |
Research and Special Programs Administration |
|
49 CFR 179.400-8(c) |
AAR Specification M-1002 |
2000 |
AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars
|
Association of American Railroads |
Environmental Protection Agency |
|
40 CFR 94.5(a)(7) |
ASTM D1319 |
2002 |
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 98.314(d) |
ASTM D5373 |
2008 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
|
ASTM International |
Energy Department |
|
10 CFR 434.701.1 RS-13 |
ANSI 101/I.S. 2 |
1997 |
Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-13)
|
American National Standards Institute |
Coast Guard |
|
46 CFR 56.10-5(c)(6) |
ASME B31.1 |
2001 |
Power Piping ASME Code for Pressure Piping
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (61) |
USGS I-2700-85 |
1989 |
Silica, colorimetric, molybdate blue, automated-segmented flow
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (23) Silica |
APHA Method 4500-SiO2 D |
1992 |
Silica, Dissolved, Heteropoly Blue Method
|
American Public Health Association |
Coast Guard |
|
46 CFR 160.151-21(f) |
IMO LSA Code |
2010 |
Life-Saving Appliances, including LSA Code
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 131.44(a)(1) |
Florida Administrative Code, Section 62-302.540 |
2005 |
Water Quality Standards for Phosphorus Within the Everglades Protection Area, as annotated by EPA (Phosphorus Rule)
|
State of Florida |
Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(xliv) |
APHA Method 4500-NO3 |
2000 |
Nitrogen (Nitrate)
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, A |
ASTM E1782 |
2003 |
Standard Test Method for Determining Vapor Pressure by Thermal Analysis
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63, Subpart UUUUU, Appendix A, Section 4.1.1.5 |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(d)(2), Table H-31 |
ASME B&PV Code |
1956 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Interior Department |
|
43 CFR 11.34(a) |
DOI NRDAM/CME |
1999 |
CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation
|
U.S. Department of the Interior |
Environmental Protection Agency |
|
40 CFR 265.1063(d)(2) |
EPA SW-846 |
2014 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.107a(d)(5)(iv) |
ASME MFC-6M |
1998 |
Measurement of Fluid Flow in Pipes Using Vortex Flow Meters
|
American Society of Mechanical Engineers |
Food and Drug Administration |
|
21 CFR 165.110(b)(4)(i)(B) |
APHA Standard Methods |
1980 |
Standard Methods for the Examination of Water and Wastewater
|
American Public Health Association |
Housing and Urban Development Department |
|
24 CFR 200.937(a)(1) |
ANSI Z124.3 |
1980 |
Plastic Lavatories
|
American National Standards Institute |
Coast Guard |
|
29 CFR 1915.155(b)(1)(ii) |
ANSI Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 76 |
1978 |
Chlorinated Poly Vinyl Chloride (CPVC) or Polybutylene (PB) Hot and Cold Water Distribution
|
U.S. Department of Housing and Urban Development |
Environmental Protection Agency |
|
40 CFR 1065.1010(e)(12) |
ISO 12185 |
2001 |
Crude petroleum and petroleum products--Determination of density--Oscillating U-tube method
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 75, Appendix F, Section 5.5.1(a) |
ASTM D5865 |
2001 |
Standard Test Method for Gross Calorific Value of Coal and Coke
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(j)(1) |
AWS D1.1 |
2000 |
Structural Welding Code--Steel
|
American Welding Society |
Energy Department |
|
10 CFR 430.3(e)(6) |
ASHRAE 41.6 |
2001 |
Standard Method for Measurement of Moist Air Properties
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Environmental Protection Agency |
|
40 CFR 89.416(a) |
SAE J-244 |
1983 |
Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines
|
Society of Automotive Engineers |
Rural Utilities Service |
|
7 CFR 1755.702(f)(2) |
ICEA S-89-648 |
1993 |
Standard for Telecommunications Aerial Service Wire, Technical Requirements
|
Insulated Cable Engineers Association |
Environmental Protection Agency |
|
40 CFR 136.3(b)(8)(xiv) |
EPA Method 1681 |
2006 |
Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using A-1 Medium
|
U.S. Environmental Protection Agency |
Food and Drug Administration |
|
21 CFR 184.1425(b) |
Food Chemicals Codex |
1981 |
Magnesium Carbonate
|
National Academy Press |