This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.124(b)(4)(iv) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(Q) | EPA Method 352.1 | 1971 | Nitrogen, Nitrate, Colorimetric, Brucine | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(39) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.222 S6.6.2 | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.023-1(a)(1) | MIL-S-18655C | 1971 | Signal, Smoke and Illumination, Marine, Mark 13, Mod 0. | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 153.4(b) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.58a(h)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (57) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 62.14104(b) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-237 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.97(b)(12) | RUS Bulletin 345-184, Form 397e | 1971 | Specifications for Mobile and Fixed Dial Radio Telephone Equipment | Rural Utilities Service, U.S. Department of Agriculture | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-529B | 1971 | Insulation Board, Thermal (Mineral Aggregate) | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(k) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 62.15265(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(D) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(2) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(50) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 75.1730(a) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(22)(i) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(1)(iii) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(j)(1) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.005-3(d) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Food and Drug Administration | 21 CFR 177.1810(c)(2)(i) | ASTM D2236 | 1970 | Standard Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsional Pendulum | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.265(d)(2)(i)(A) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 172.407(d)(3) | ASTM G26 | 1970 | Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5300-8 | 1970 | Planning and Design Criteria for Metropolitan STOL Ports | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(24) | NFPA 101 | 1970 | Code for Life Safety From Fire in Buildings and Structures | National Fire Protection Association | |
Research and Special Programs Administration | 21 CFR 173.165(b)(2) | FDA Publication | 1970 | Yeasts—A Toxonomic Study by Jacomina Lodder 1970 HHS/FDA | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5335-1A | 1970 | Airport Design Standards--Airports Served by Air Carriers--Taxiways (1970, through change 2, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(1) | ANSI A10.3 | 1970 | Safety Requirements for Explosive-Actuated Fastening Tools | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE J-167 | 1970 | Protective frame with overhead protection—test procedures and performance requirements | Society of Automotive Engineers | |
Coast Guard | 46 CFR 164.018-5(a)(3) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(21) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(4) | SAE J-168 | 1970 | Protective Enclosures—Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Rural Utilities Service | 29 CFR 1926.6(y)(1) | NFPA 10A | 1970 | Maintenance and Use of Portable Fire Extinguishers | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152, Appendix B(b) | 150/5320-5B | 1970 | Airport Drainage | Federal Aviation Administration, U.S. Department of Transportation |