This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 98.123(e)(2) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Federal Communications Commission | 88 FR 67108 | 47 CFR 2 | CISPR 16-1-4:2010-04 | 2010 | Updating References to Standards Related to the Commission's Equipment Authorization Program | International Electrotechnical Commission |
Coast Guard | 46 CFR 160.151-21(d) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Housing and Urban Development Department | 89 FR 75704 | 24 CFR 3280 | ASTM B251–10 | 2010 | Manufactured Home Construction and Safety Standards | ASTM International |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 85 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1045 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Coast Guard | 46 CFR 160.051-7(e) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1030 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 63.1282(g)(4)(iii)(B)(2) | ASTM D1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1066 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.151-15(l) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-27(a) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of life-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.6(b)(4)(x) | OIA Method OIA-1677 | 2010 | Available Cyanide by Flow Injection, Ligand Exchange, and Amperometry | OI Analytical | |
Environmental Protection Agency | 40 CFR 60.107a(d)(4)(ii) | ASTM D1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 431.96 (d) | AHRI 1230-2010 | 2010 | 2010 Standard for Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment | Air Conditioning, Heating, and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 63.14(g)(5) | ASTM D396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(15) | ASTM D1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1036 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1066.501(a)(2) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Homeland Security Department | 86 FR 58560 | 33 CFR 175 | NFPA 10 | 2010 | Fire Protection for Recreational Vessels | National Fire Protection Association |
Environmental Protection Agency | 40 CFR 80.46(b)(2) | ASTM D6550 | 2010 | Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography | ASTM International | |
Coast Guard | 46 CFR 160.151-27(c)(3) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(73) | ASTM F1120 | 2010 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(79) | ASTM F1200 | 2010 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEC 60079-25:2010 | 2010 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(A) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 80 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D6550 | 2010 | Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 63.99(a)(5)(ii)(E) | CA State Regulations | 2010 | California Regulatory Requirements Applicable to the Air Toxics Program | State of California | |
Coast Guard | 46 CFR 160.010-3(a)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 19 | EPA Method 1103.1 | 2010 | Escherichia coli (E. coli) in Water by Membrane Filtration Using membrane-Thermotolerant Escherichia coli Agar (mTEC) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xiv) | ASTM D6667 | 2010 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence | ASTM International | |
Coast Guard | 46 CFR 160.151-15(h) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-57(b)(1) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(2) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM F819 | 2010 | Standard Terminology Relating to Electrical Protective Equipment for Workers | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(k)(1) | CA State Regulations | 2010 | California Regulatory Requirements Applicable to the Air Toxics Program | State of California | |
Environmental Protection Agency | 40 CFR 1066.1010(b)(1) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Veterans Affairs Department | 38 CFR 17.1(b)(1) | NFPA 10 | 2010 | Portable Fire Extinquishers | National Fire Protection Association | |
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | SAE J1252 (J1252_201207) | 2010 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | SAE International |
Environmental Protection Agency | 40 CFR 55.14(d)(11)(i) | 40 CFR part 52, subpart W | 2010 | Commonwealth of Massachusetts Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.151-5(d)(5) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(p) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(e) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 98.94(f)(4)(i) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Coast Guard | 38 CFR 17.1(b)(4) | NFPA 13 | 2010 | Automatic Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (24) | OIA Method OIA-1677-09 | 2010 | Available Cyanide by Flow Injection, Ligand Exchange, and Amperometry | OI Analytical | |
Environmental Protection Agency | 40 CFR 63.14(g)(20) | ASTM D2234/D 2234M | 2010 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |