This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(29) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.97(b)(13) | RUS Bulletin 1728F-700 | 2011 | Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Public Health Service | 42 CFR 37.51(c) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
Research and Special Programs Administration | 45 CFR 162.1203(a)(3) | CAQH Publication | 2011 | Phase I CORE 154: Eligibility and Benefits 270/271 Data Content Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (vi) | Drawing No. 420-5000-2 | 2011 | Complete Leg Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 1065.267(b) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 435.41(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
Housing and Urban Development Department | 89 FR 75704 | 24 CFR 3280 | UL 263 | 2011 | Manufactured Home Construction and Safety Standards | Underwriters Laboratories, Inc. |
Environmental Protection Agency | 40 CFR 1065.1010(g)(2) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(1)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Transportation Department | 89 FR 15636 | 49 CFR 171 | CGA G-1.6:2011 | 2011 | Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements | Compressed Gas Association |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.8) | 40 CFR Part 136, appendix B | 2011 | Definition and Procedure for the Determination of the Method Detection Limit-Revision 1.11 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 8 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.2(kkkk)(1)(ii) | ASTM D976 | 2011 | Standard Methods for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Public Health Service | 42 CFR 37.10(f)(1) | DICOM Standard PS 3.3-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 3: Information Object Definitions | National Electrical Manufacturers Association | |
Energy Department | 86 FR 56608 | 10 CFR 430 | IEC 62301 | 2011 | Energy Conservation Program: Test Procedure for Clothes Dryers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3560 | 2011 | Chest flesh assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Federal Communications Commission | 86 FR 23614 | 47 CFR 68 | ANSI C63.19-2011 | 2011 | Standards for Hearing Aid-Compatible Handsets | American National Standards Institute |
Coast Guard | 46 CFR 39.1005(h)(1) | NFPA 70 | 2011 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 80.46(a)(4) | ASTM D4468 | 2011 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry | ASTM International | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(F) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | HCC Method 10360 | 2011 | Luminescence Measurement of Dissolved Oxygen in Water and Wastewater and for Use in the Determination of BOD5 and cBOD5. Revision 1.2 | Hach Chemical Company | |
Federal Highway Administration | 23 CFR 625.4(a) | AASHTO Interstate Standards | 2011 | A Policy on Geometric Design of Highways and Streets | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 63.14(g)(44) | ASTM D4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D2158 | 2011 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(vii) | Drawing No. 420-5000-2 | 2011 | Complete Leg Assembly—right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(66) | ANSI Z535.1 | 2011 | Safety Colors | American National Standards Institute | |
Transportation Department | 89 FR 15636 | 49 CFR 178 | CGA S-1.1:2011 | 2011 | Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements | Compressed Gas Association |
Federal Communications Commission | 47 CFR 80.1101(b) | 47 CFR 80.1061 | 2011 | Special requirements for 406.0-406.1 MHz EPIRB stations | Federal Communications Commission | |
Public Health Service | 42 CFR 37.51(d)(1)(i) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Federal Highway Administration | 23 CFR 625.4(d)(2) | D1.4/D1.4M | 2011 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (vii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly, left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Transportation Department | 89 FR 15636 | 49 CFR 107 | CGA S-1.1-2011 | 2011 | Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements | Compressed Gas Association |
Environmental Protection Agency | 40 CFR 435.11(u) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Health and Human Services Department | 45 CFR 162.1602(d)(1)(i) | NACHA Publication | 2011 | NACHA Operating Rules & Guidelines, A Complete Guide to the Rules Governing the ACH Network | National Automated Clearing House Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(86) | ASTM D7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (b)(2)(v) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Coast Guard | 45 CFR 162.920(c)(3)(v) | CAQH Publication | 2011 | Phase II CORE 270: Connectivity Rule, version 2.2.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(2) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.40(c)(1)(ii) | EPA Method 218.7 | 2011 | Determination of Hexavalent Chromium in Drinking Water by Ion Chromatography with Post-Column Derivatization and UV-Visible Spectroscopic Detection, Version 1.0 | U.S. Environmental Protection Agency | |
Public Health Service | 42 CFR 37.10(f)(2) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(19)(vii) | HCC Method 10360 | 2011 | Luminescence Measurement of Dissolved Oxygen in Water and Wastewater and for Use in the Determination of BOD5 and cBOD5. Revision 1.2 | Hach Chemical Company | |
Coast Guard | 46 CFR 56.01-2(e)(72) | ASTM F1020 | 2011 | Standard Specification for Line-Blind Valves for Marine Applications | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEC 60079-11:2011 | 2011 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Federal Communications Commission | 47 CFR 80.1101(c)(11)(v) | 47 CFR 80.1063 | 2011 | Special requirements for INMARSAT-E EPIRB stations | Federal Communications Commission | |
Consumer Product Safety Commission | 16 CFR 1211.40 (b)(1) | ANSI/DASMA 102 | 2011 | Specifications for Sectional Doors | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation |