This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(B) | EPA Method 130.1 | 1971 | Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(Q) | EPA Method 352.1 | 1971 | Nitrogen, Nitrate, Colorimetric, Brucine | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-475A | 1971 | Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2 | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(39) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Coast Guard | 46 CFR 153.940(a)(2) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.222 S6.6.2 | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (57) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighters | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 77.403(a) | SAE J-231 | 1971 | Minimum Performance Criteria for Falling Object Protective Structures (FOPS) | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 153.4(b) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(6) | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighting | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.58a(h)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 62.14104(b) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.97(b)(12) | RUS Bulletin 345-184, Form 397e | 1971 | Specifications for Mobile and Fixed Dial Radio Telephone Equipment | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Mine Safety and Health Administration | 30 CFR 77.801-1 | IEEE 32 | 1971 | Requirements, Terminology and Test Procedures for Neutral Grounding Devices | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ASAE S276.2 | 1971 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
Coast Guard | 46 CFR 160.040-1(a)(2) | MIL-R-45505A | 1971 | Line Throwing Apparatuses, Rocket and Projectile Units | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 62.15265(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-529B | 1971 | Insulation Board, Thermal (Mineral Aggregate) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(D) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(2) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 13A, Section 7.1.1.2 | ASTM D2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.268(i)(1) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(50) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.1810(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Federal Railroad Administration | 49 CFR 229.51(b) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5335-3 | 1971 | Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 33 CFR 67.30-5(a) | MIL-C-25050 | 1971 | Color, Aeronautical Lights and Lighting Equipment | U.S. Department of Defense | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(3) | SAE J-166 | 1971 | Trucks and Wagons | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1500.49 (e)(3) | MIL-I-23594B | 1971 | Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive | Defense Standardization Program, Department of Defense |