This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.1450(a)(6) | NVUIC regulations | 1987 | Nevada Administrative Code [NAC], Regulations and Rules of Practice and Procedure adopted Pursuant to NRS 522.010 through 522.625, Inclusive. July 22, 1987 (amending NAC Chapter 522). | State of Nevada | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-601 | 1987 | Lower leg flesh | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 75.6(b)(5) | ASME MFC-7M | 1987 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.125(a) | Drawing No. 9001336 | 1987 | Jam Nut | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | RFCI Publication | 1987 | Recommended Installation Specification for Vinyl Composition, Solid Vinyl, and Asphalt Tile Floorings | Resilient Floor Covering Institute | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.3) | DIN Method 38 409 | 1987 | Determination of Adsorbable Organic Halogens (AOX), German Standard Methods for the Analysis of Water, Waste Water and Sludge—General Parameters of Effects and Substances, Part 14 | Deutsche Industrie Norm | |
Coast Guard | 46 CFR 39.2011(b)(2) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.397(b)(7) | Bellcore TR-TSY-000057 | 1987 | Functional Criteria for Digital Loop Carrier Systems | Bell Communications Research | |
Coast Guard | 46 CFR 67.13(b) | DOC Publication 55DC | 1987 | Codes for Named Populated Places, Primary County Divisions, and Other Locational Entities of the United States and Outlying Areas | U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(i)(A) | ASTM D56 | 1987 | Standard Test Method for Flash Point by Tag Closed Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 264.1063(d)(1) | ASTM E169 | 1987 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 129.320(e) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(1) | Drawing No. SA-SID-M010 | 1987 | Title not specified | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.113 | Drawing No. 78051-104 | 1987 | Neck Assembly, revision F | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 571.3(b), Seating reference point (4) | SAE J-826 | 1987 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | ARI 470 | 1987 | Desuperheater/Water Heaters | Air Conditioning and Refrigeration Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.155(c) | Drawing No. SA-572-S23 | 1987 | Neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 98.364(e)(4) | ASME MFC-7M | 1987 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269(v)(3) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Food and Drug Administration | 21 CFR 177.1050(c)(2) | FDA Publication | 1987 | Molecular Weight of Matrix Copolymer by Solution Viscosity | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 147.1750(a)(2) | NDUIC regulations | 1987 | North Dakota Administrative Code, Chapter 43-02-05 (Underground Injection Control, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission | State of North Dakota | |
Coast Guard | 33 CFR 154.510(a) | ANSI B31.3 | 1987 | Chemical Plant and Petroleum Refinery Piping | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(3) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | WC Method B-1011 | 1987 | Waters Test Method for Determination of Nitrite/Nitrate in Water Using Single Column Ion Chromatography | Waters Corp. | |
Environmental Protection Agency | 40 CFR 63.14(g)(93) | ASTM E711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.133(b) | Drawing No. 880105-208 | 1987 | Lower neck adjusting bracket | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.159 (4) | NFPA 13A | 1987 | Maintenance of Automatic Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(29) | EPA-450-4-87-009 | 1987 | Optimum Network Design and Site Exposure Criteria for Particulate Matter, Koch, R.C. and H.E. Rector. EPA Contract No. 68-02-3584 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM A505 | 1987 | Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled | ASTM International | |
Environmental Protection Agency | 40 CFR 60.106(j)(2) | ASTM D2622 | 1987 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-660 | 1987 | Ankle assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 164.120-5(d)(9) | ISO 2039-2:1987(E) | 1987 | Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.420(a)(2)(i) | ANSI N14.1 | 1987 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 260.11(b)(8) | ASTM E169 | 1987 | Standard Practice for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(2) | Drawing No. SA 150 M020 | 1987 | Neck assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.127(c) | Drawing No. 127-0000 | 1987 | Technical drawings and specifications package | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(x) | ASTM A153 | 1987 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.113 | Drawing No. 78051-303 | 1987 | Neck Assembly, revision E | General Motors Corporation | |
Coast Guard | 46 CFR 58.20-5(a) | ANSI B31.5 | 1987 | Refrigeration Piping | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iv) | ASTM B193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International | |
Food and Drug Administration | 21 CFR 177.1050(c)(3) | FDA Publication | 1987 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(6) | Drawing No. SA-SID-M080 | 1987 | Leg Assembly, Right | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-84 | 1987 | Title not specified | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 572.127(i) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 147.1750(a)(3) | NDUIC regulations | 1987 | North Dakota Administrative Code, Chapter 43-02-03 (General Rules, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission | State of North Dakota | |
National Highway Traffic Safety Administration | 49 CFR 572.121 Table A | Drawing No. 127-1000 | 1987 | Head Assembly | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(4) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.14(g)(94) | ASTM E776 | 1987 | Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 761.19(a)(4) | ASTM D482 | 1987 | Standard Test Method for Ash from Petroleum Products | ASTM International |