| Environmental Protection Agency |
|
40 CFR 60.17(g)(53) |
ASTM D1193 |
1991 |
Standard Specification for Reagent Water
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(61) |
ANSI Z41 |
1991 |
Personal Protection-Protective Footwear
Archived
|
American National Standards Institute |
| Animal and Plant Health Inspection Service |
|
7 CFR 300.2(a) |
USDA Handbook 188 |
1991 |
Dry Kiln Operator's Manual
Archived
|
U.S. Department of Agriculture |
| Energy Department |
|
10 CFR 434.701.1 RS-32 |
ANSI Z21.13 |
1991 |
Gas-Fired Low Pressure Steam and Hot Water Heating Boilers (RS-32)
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 434.701.1 RS-10 |
ASTM E283 |
1991 |
Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (RS-10)
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 434.701.1 RS-6 |
ASTM C518 |
1991 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6)
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 431.15(b)(6) |
IEC 60072-1 |
1991 |
Dimensions and Output Series for Rotating Electrical Machines
Archived
|
International Electrotechnical Commission |
| Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(E)(10)(v) |
EPA-600-4-91-010 |
1991 |
Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry
Archived
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(v) |
ANSI Z41 |
1991 |
Protective Footwear
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(5) |
ANSI/NSC Z41 |
1991 |
Protective Footwear
Archived
|
National Safety Council |
| Coast Guard |
|
33 CFR 155.140(b)(1) |
ANSI A10.14 |
1991 |
Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 430.3(c)(1) |
ANSI C78.3 |
1991 |
American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 431.105(d)(2)(i) |
ASTM C518 |
1991 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 175.600(b) Table |
IMO Resolution A.688(17) |
1991 |
Fire Test Procedures for Ignitability of Bedding Components
Archived
|
International Maritime Organization |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 4126-1 |
1991 |
Safety Valves
Archived
|
International Organization for Standardization |
| Nuclear Regulatory Commission |
|
10 CFR 50.55a(h)(1) |
IEEE 603 |
1991 |
Standard Criteria for Safety Systems for Nuclear Power Generating Stations
Archived
|
Institute of Electrical and Electronics Engineers |
| Coast Guard |
|
46 CFR 114.600(b) |
Resolution A.688(17) |
1991 |
Fire Test Procedures For Ignitability of Bedding Components
Archived
|
International Maritime Organization |
| Coast Guard |
|
46 CFR 114.600(b) |
UL 595 |
1991 |
Marine Type Electric Lighting Fixtures
Archived
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 125.180(b) |
UL 595 |
1991 |
Marine-Type Electric Lighting Fixtures
Archived
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 170.015(c)(1) |
MIL-P-21929B |
1991 |
Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 170.245(b)(9) |
MIL-P-21929B |
1991 |
Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 175.600(b) Table |
UL 595 |
1991 |
Marine Type Electric Lighting Fixtures
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 179.240(b)(1) |
MIL-P-21929C |
1991 |
Plastic Material, Cellular, Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot)
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASME B16.14 |
1991 |
Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 125.180(b) |
ABYC E-9 |
1990 |
Direct-Current (DC) Electrical Systems on Boats
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 160.135-5(f)(4) |
MIL-R-21607E(SH) |
1990 |
Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 160.135-11(c)(2)(i)(A) |
MIL-R-21607E(SH) |
1990 |
Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 160.156-5(f)(3) |
MIL-R-21607E(SH) |
1990 |
Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 160.156-11(c)(2)(i)(A) |
MIL-R-21607E(SH) |
1990 |
Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 164.120-5(d)(12) |
ISO 2555:1989(E) |
1990 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity by the Brookfield test method, Second Edition
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 164.120-5(e)(2) |
MIL-R-21607E(SH) |
1990 |
Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 164.120-7(a)(1)(i) |
MIL-R-21607E(SH) |
1990 |
Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 164.120-7(a)(1)(ii) |
MIL-R-21607E(SH) |
1990 |
Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(c)(1)(ii) |
ISO 2555:1989(E) |
1990 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity by the Brookfield test method, Second Edition
|
International Organization for Standardization / International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ISO 8846 |
1990 |
Small Craft-Electrical Devices-Protection Against Ignition of Surrounding Flammable Gases
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ISO 8849 |
1990 |
Small Craft-Electrically Operated Bilge Pumps
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 177.410(b) |
MIL-R-21607E(SH) |
1990 |
Resins, Polyester, Low Pressure Laminating, Fire Retardant
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 182.500(b) |
ISO 8846 |
1990 |
Small Craft-Electrical Devices-Protection Against Ignition of 1990 DHS/USCG
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 182.500(b) |
ISO 8849 |
1990 |
Small Craft-Electrically Operated Bilge Pumps
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 28.40(b) |
NFPA 70 |
1990 |
National Electrical Code
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 28.40(b) |
UL 710 |
1990 |
Exhaust Hoods For Commercial Cooking Equipment
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 28.350(g) |
NFPA 70 |
1990 |
National Electrical Code
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 28.370(d)(2)(i) |
NFPA 70 |
1990 |
National Electrical Code
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 28.865(e)(2)(i) |
NFPA 70 |
1990 |
National Electrical Code
|
National Fire Protection Association |
| Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM D579 |
1990 |
Standard Specification for Greige Woven Glass Fabrics
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM E330 |
1990 |
Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200.948(a)(2) |
ASTM D1667 |
1990 |
Standard Specification for Flexible Cellular Materials--Vinyl Chloride Polymers and Copolymers (Closed-cell Foam)
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200.949(a)(2) |
ISDSI 100 |
1990 |
Door Size Dimensional Standard and Assembly Tolerances for Insulated Steel Door Systems
|
Insulated Steel Door Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(23) |
ASTM D4956 |
1990 |
Standard Specification for Retroreflective Sheeting for Traffic Control
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.44(d)(5) |
RT Publication |
1990 |
FIR100 Filter Program, Version 1.0
|
Reprographic Technologies |