This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.113 | ASTM A691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(4) | SAE J-2261 | 2002 | Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or more in Overall Width | Society of Automotive Engineers | |
Drug Enforcement Administration | 21 CFR 1311.205(b)(4)(iii) | FIPS Publication 140-2 | 2002 | Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 141.852(a)(5) Table | EPA Method 1604 | 2002 | Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration Using a Simultaneous Detection Technique (MI Medium) on DC | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.264(b)(1) | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(12)(iii) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1068.95(a) Table 1 | SAE J-1930 | 2002 | Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 13, 1(b) | ASTM D6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (24A) | ASTM D4282 | 2002 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1436(c)(1)(ii) | AWS D1.1/D1.1M | 2002 | Structural Welding Code—Steel, 18th ed. | American Welding Society | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.1 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(vi) | ASTM C1149 | 2002 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(2)(iv) | SAE J-1930 | 2002 | Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms | Society of Automotive Engineers | |
Coast Guard | 46 CFR 111.60-13(b)(2) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xlviii) | ASTM D4282 | 2002 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion. | ASTM International | |
Transportation Department | 89 FR 25434 | 49 CFR 175 | ISO 11119–1(E) | 2002 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.888 | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.131 Table A | Drawing No. 880105-728-2 | 2002 | Complete Arm Assembly, Right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 63.14(l)(20) | EPA Method 1631 | 2002 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, Revision E | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(3)(ii) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(84) | ASTM D6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Research and Special Programs Administration | 49 CFR 192.65(a) | API RP 5L1 | 2002 | Recommended Practice for Railroad Transportation of Line Pipe | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.14(g)(59) | ASTM D5087 | 2002 | Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) | ASTM International | |
Coast Guard | 33 CFR 104.400(b) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA-815-R-03-007 | 2002 | Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography Incorporating the Addition of a Suppressor Acidified Postcolumn Reagent for Trace Bromate Analysis | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | ASTM D3557A | 2002 | Cadmium in Water Atomic Absorption | ASTM International | |
Federal Communications Commission | 88 FR 67108 | 47 CFR 2 | ANSI/SCTE 65 2002 (formerly DVS 234) | 2002 | Updating References to Standards Related to the Commission's Equipment Authorization Program | Society of Cable Telecommunications Engineers |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 408.3.2.1 | BHMA A156.19 | 2002 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Coast Guard | 46 CFR 111.105-3 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 326.0 | 2002 | Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography Incorporating the Addition of a Suppressor Acidified Postcolumn Reagent for Trace Bromate Analysis, Revision 1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.60-3(c) | IEEE 45 | 2002 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix G, 13 | EPA-454-B-02-002 | 2002 | Data Quality Objectives (DQOs) For Relating Federal Reference Method (FRM) and Continuous PM 2.5 Measurements to Report an Air Quality Index (AQI), Eberly, S., T. Fitz-Simons, T. Hanley, et al. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart MMMM, Appendix A, Section 3.2 | ASTM D5291 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Minerals Management Service | 30 CFR 250.802(e)(4)(i) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(viii) | NFPA 72 | 2002 | National Fire Alarm Code | National Fire Protection Association | |
Energy Department | 10 CFR 430.3(c)(16) | ANSI C82.13 | 2002 | American National Standard for Lamp Ballasts—Definitions for Fluorescent Lamps and Ballasts, | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(174) | ASTM D5762 | 2002 | Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 1, 14(b) | ASTM D6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 88A | 2002 | Parking Structures | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(viii) | EPA-821-R-02-012 | 2002 | Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, Fifth Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 51 | ASTM D5287-97(2002) | 2002 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.136(a) | Drawing No. 880105-560 | 2002 | Complete Leg Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(6)(ii)(G) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Coast Guard | 46 CFR 110.10-1(o)(1) | UL 44 | 2002 | Standard for Thermoset-Insulated Wire and Cable | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 6 | ASTM Annual Book of Standards | 2002 | ASTM Volume 11.01 | ASTM International | |
Federal Trade Commission | 16 CFR 460.5(a)(4) | ASTM C1149 | 2002 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation | ASTM International | |
Coast Guard | 46 CFR 111.60-3(a)(2) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Energy Department | 85 FR 56475 | 10 CFR 429 | ANSI C82.13-2002 | 2002 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | American National Standards Institute |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 43 | EPA Method 1631 | 2002 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-02-019. Revision E | U.S. Environmental Protection Agency |