This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart AAAAAAA, Table 3, (6) | EPA SW-846-8270D | 2007 | Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 4 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(71) | ASTM F1007 | 2007 | Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application | ASTM International | |
Minerals Management Service | 30 CFR 250.803(b)(9)(v) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Environmental Protection Agency | 85 FR 40386 | 40 CFR 63 | SW-846-8260B | 2007 | National Emission Standards for Hazardous Air Pollutants: Generic Maximum Achievable Control Technology Standards Residual Risk and Technology Review for Ethylene Production | U.S. Environmental Protection Agency |
Environmental Protection Agency | 40 CFR 98.254(e)(2) | ASTM D240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Rural Utilities Service | 7 CFR 1755.903(a)(7) | IEEE C2 | 2007 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 14596 | 2007 | Petroleum products--Determination of sulfur content--Wavelength-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(9)(v) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Coast Guard | 33 CFR 155.140(c)(5) | ASTM F1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 98.354(d)(4) | ASTM D1941 | 2007 | Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume | ASTM International | |
Transportation Department | 89 FR 25434 | 49 CFR 171 | ISO 18172–1:2007(E) | 2007 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Coast Guard | 46 CFR 54.05-20(b) | ASTM A203/A 203M | 2007 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | UL 823 2007 | 2007 | Update to Electrical Engineering Regulations | Underwriters Laboratories, Inc. |
Environmental Protection Agency | 40 CFR 80.46(d) | ASTM D86 | 2007 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (22) | ASTM D1688B | 2007 | Standard Test Methods for Copper in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Energy Department | 10 CFR 433.5(a)(2) | ASHRAE 90.1 | 2007 | Energy Standard for Buildings Except Low-Rise Residential Buildings | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEC 60079-30-1 | 2007 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 272.201(c)(1) | ARHWMP | 2007 | Arkansas Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Arkansas | |
Federal Communications Commission | 89 FR 7224 | 47 CFR 27 | ATSC A/53 Parts 1-4 and 6: 2007 | 2007 | Establishing Rules for Full Power Television and Class A Television Stations | Advanced Television Systems Committee |
Minerals Management Service | 30 CFR 250.1203(b)(2)(iii) | AGA Report No. 9 | 2007 | Measurement of Gas by Multipath Ultrasonic Meters; Second Edition | American Gas Association | |
Federal Communications Commission | 86 FR 23614 | 47 CFR 68 | ANSI C63.19-2007 | 2007 | Standards for Hearing Aid-Compatible Handsets | American National Standards Institute |
Minerals Management Service | 30 CFR 250.802(b) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | ASTM D1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Minerals Management Service | 30 CFR 250.802(d) | API RP 14H | 2007 | Recommended Practice for the Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.1329(c)(2)(ii) | ASTM D3370 | 2007 | Standard Practices for Sampling Water | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | ASTM D3557C | 2007 | Standard Test Methods for Cadmium in Water | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(6) | API MPMS | 2007 | Chapter 2, Section 2A | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.14(g)(55) | ASTM D4606 | 2007 | Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.29 | 2007 | Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (5) | APHA Method 9213 D | 2007 | Membrane Filtration Quantitative (mTEC/urea): E. coli (Beachwater only) | American Public Health Association | |
Environmental Protection Agency | 40 CFR 55.14(d)(16)(i) | 40 CFR part 52, subpart HH | 2007 | State of New York Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(f)(12) | ASME MFC-22 | 2007 | Measurement of Liquid by Turbine Flowmeters | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.17(b) | ASTM IRM 903 | 2007 | Immersion Oil | ASTM International | |
Coast Guard | 46 CFR 164.120-5(b)(10) | ASTM D2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(3)(i) | ASTM D790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Energy Department | 80 FR 42663 | 10 CFR 431.76 (d)(2) | ASHRAE 103 | 2007 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Health and Human Services Department | 45 CFR 162.1702(b) | ASC X12N 820 | 2007 | Payroll Deducted and Other Group Premium Payment of Insurance Products | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1629(b)(4)(v) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | EPA SW-846-6010C | 2007 | Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 3 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(f) | EPA SW-846-7471B | 2007 | Mercury In Solid Or Semisolid Waste (Manual Cold-Vapor Technique), Revision 2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | ASTM D516 | 2007 | Standard Test Method for Sulfate Ion in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | ASTM D4208 | 2007 | Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method | ASTM International | |
Environmental Protection Agency | 40 CFR 63.11980(a)(2)(iv) | EPA SW-846-8015C | 2007 | Nonhalogenated Organics by Gas Chromatography, Revision 3 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D86 | 2007 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Energy Department | 10 CFR 431.85(b)(1) | HI BTS-2000 | 2007 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Environmental Protection Agency | 40 CFR 98.7(e)(15) | ASTM D2503 | 2007 | Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(4) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.14(l)(16) | EPA SW-846-9056 | 2007 | Determination of Inorganic Anions by Ion Chromatography, Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D4606 | 2007 | Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method | ASTM International |