This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Communications Commission | 88 FR 67108 | 47 CFR 68 | TP-ATP-M-UDCP-I05-20080304 | 2008 | Updating References to Standards Related to the Commission's Equipment Authorization Program | Cable Television Laboratories, Inc. |
Public Health Service | 42 CFR 37.10(c)(1) | ACR Publication | 2008 | ACR Practice Guideline for Diagnostic Reference Levels in Medical X-Ray Imaging, (Resolution 3) | American College of Radiology | |
Environmental Protection Agency | 40 CFR 141.40(c)(2)(ii) | ASTM D6581 | 2008 | Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography | ASTM International | |
Coast Guard | 46 CFR 160.156-11(c)(2)(ii) | ASTM A653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(lxvi) | ASTM D7284 | 2008 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection | ASTM International | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5580 | ASTM D3699 | 2008 | Standard Specification for Kerosine | ASTM International | |
Environmental Protection Agency | 40 CFR 1066.20(a) | NIST Special Publication 811 | 2008 | Guide for the Use of the International System of Units (SI) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 98.34(d) | ASTM D6866 | 2008 | Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis | ASTM International | |
Coast Guard | 10 CFR 430 Subpart B, App. A, 5.1 | AHAM HRF-1 | 2008 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 160.170-5(b)(3) | ASTM A313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1033 | SAE J2263_200812 | 2008 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
National Highway Traffic Safety Administration | 49 CFR 571.121 S6.1.7 | ASTM E1337 | 2008 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xix) | ASTM D1253 | 2008 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Transportation Department | 89 FR 25434 | 49 CFR 171 | ISO 13736:2008(E) | 2008 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 98.254(i)(3) | ASTM D5373 | 2008 | Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ASTM D2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1048 | NIST SP 811 | 2008 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | National Institute of Standards and Technology, U.S. Department of Commerce |
Environmental Protection Agency | 40 CFR 1042.501(g) | IMO Publication | 2008 | NOX Technical Code | International Maritime Organization | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1903 | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(70) | ISO 10423:2003 | 2008 | (REF)Drilling and production equipment—Wellhead and Christmas tree equipment; Errata 1, Sept 2004, Errata 2, Apr 2005, Errata 3, Jun 2006, Errata 4, Aug 2007, Errata 5, May 2009; Add. 1, Feb 2008; Add. 2, 3, and 4, Dec 2008 | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 98.7(e)(38) | ASTM E1019 | 2008 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(m)(8) | EPA Publication | 2008 | Protocol for Measurement of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) Emissions from Primary Aluminum Production | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1054 | SAE J2263_200812 | 2008 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.170-7(b)(3) | ASTM A314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (17) | ASTM D1253 | 2008 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Coast Guard | 46 CFR 162.161-3(d) | NFPA 2001 | 2008 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.135-5(b)(1) | ASTM A36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 46 CFR 171.012(b)(2) | IMO Resolution MSC 267(85) | 2008 | Adoption of the International Code on Intact Stability, 2008 (2008 IS Code) | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F496 | 2008 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
Coast Guard | 46 CFR 160.156-5(b)(9) | ASTM D2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.30(c) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D3559D | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 13, 13(b) | ASTM D6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Health and Human Services Department | 45 CFR 162.1402(b)(2) | ASC X12N 276/277 | 2008 | Errata to Health Care Claim Status Request and Response | Washington Publishing Company | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1068 | SAE J2263_200812 | 2008 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.132-5(b)(1) | ASTM A36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(36) | API MPMS | 2008 | Chapter 10—Sediment and Water, Section 3—Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) | American Petroleum Institute |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1065 | NIST SP 811 | 2008 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | National Institute of Standards and Technology, U.S. Department of Commerce |
Rural Utilities Service | 7 CFR 1728.97(e)(11) | AWPA P5 | 2008 | Standard for Waterborne Preservatives | American Wood Protection Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.852(e)(1) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 1043.70(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 13 | International Maritime Organization | |
Research and Special Programs Administration | 45 CFR 162.1202(b)(2)(ii) | ASC X12N 270/271 | 2008 | Health Care Eligibility Benefit Inquiry and Response, Version 4010 | Washington Publishing Company | |
Environmental Protection Agency | 40 CFR 60.17(f)(3) | ASME MFC-4M | 2008 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 87.1, Characteristic level | ICAO Annex 16 | 2008 | Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition | International Civil Aviation Organization | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D975 | 2008 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60 Subpart DDDD, Table 9, Mercury | ASTM D6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 98.253(m)(1) | EPA AP 42, Section 5.2 | 2008 | AP 42, Section 5.2, Transportation and Marketing of Petroleum Liquids | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Transportation Department | 87 FR 79752 | 49 CFR 177 | ISO 4706:2008(E) | 2008 | Hazardous Materials: Editorial Corrections and Clarifications | International Organization for Standardization |