This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 1066.305 | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D4177 | 2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Coast Guard | 46 CFR 160.115-15(e)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(g) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Consumer Product Safety Commission | 16 CFR 1420.3(a) | ANSI/SVIA 1 | 2010 | American National Standard for Four-Wheel All-Terrain Vehicles | Specialty Vehicle Institue of America | |
Coast Guard | 46 CFR 160.151-21(p) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 98, Subpart I, Appendix A, (c)(2) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(1) Table 1 | ASTM D2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 80.580(c)(2)(i) | ASTM D4294 | 2010 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International | |
Veterans Affairs Department | 38 CFR 17.63(a)(2) | NFPA 101A | 2010 | Guide to Alternative Approaches to Life Safety | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(41) | ASTM D6550 | 2010 | Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.703 Table 1 | ASTM D2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(f) | API Standard 65 | 2010 | Part 2, Isolating Potential Flow Zones During Well Construction, Second Edition | American Petroleum Institute | |
Coast Guard | 46 CFR 160.051-5(b)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
Homeland Security Department | 87 FR 5660 | 33 CFR 127 | NFPA 10 | 2010 | Operational Risk Assessments for Waterfront Facilities Handling Liquefied Natural Gas as Fuel, and Updates to Industry Standards | National Fire Protection Association |
Coast Guard | 46 CFR 160.170-15(f) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 600.011(b)(5) | ASTM D3343 | 2010 | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(e)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 59 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Veterans Affairs Department | 38 CFR 17.74(p)(3)(i) | NFPA 13 | 2010 | Installation of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 600.011(c)(3) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (4-androstene-3,17-dione) | EPA Method 539 | 2010 | Determination of Hormones in Drinking Water by Solid Phase Extraction (SPE) and Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry (LC-ESI-MS/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1043 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Federal Communications Commission | 86 FR 23281 | 47 CFR 15 | IEEE 802.11p- 2010 | 2010 | Use of the 5.850-5.925 GHz Band | Institute of Electrical and Electronics Engineers |
Energy Department | 87 FR 33316 | 10 CFR 431 | AATCC TM135-2010 | 2010 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | American Association of Textile Chemists and Colorists |
Coast Guard | 46 CFR 160.133-3 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(e) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-33(b) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 17 | Colilert-18® Method | 2010 | Coliform/E. coli detection kit | IDEXX Laboratories | |
National Highway Traffic Safety Administration | 49 CFR 571.226 S7.1.1 | NHTSA Parts List and Drawings | 2010 | Ejection Mitigation Headform Drawing Package | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 1065.710 Table 2 | ASTM D2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D4097 | 2010 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1042 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Veterans Affairs Department | 38 CFR 17.1(b)(5) | NFPA 13D | 2010 | Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes | National Fire Protection Association | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1065 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 55.14(d)(2)(i) | 40 CFR part 52, subpart C | 2010 | State of Alaska Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.7 | ASTM D5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 160.151-21(l) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D7467 | 2010 | Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20), including Appendices X1 through X3 | ASTM International | |
Coast Guard | 46 CFR 160.151-21(a) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Energy Department | 88 FR 17934 | 10 CFR 429 | ISO 5198:1987(E) | 2010 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Food and Drug Administration | 21 CFR 1.24(a)(6)(i) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1090 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1060.105(f)(3) | ABYC H-25 | 2010 | Portable Marine Gasoline Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 272.1601(c)(1)(i) | NMHWMP | 2010 | EPA-Approved New Mexico Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of New Mexico | |
Coast Guard | 46 CFR 160.135-5(d)(3) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization |