| Coast Guard |
|
46 CFR 56.01-2(e)(63) |
ASTM B280 |
1997 |
Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(49) |
ASTM B75 |
1997 |
Standard Specification for Seamless Copper Tube
Archived
|
ASTM International |
| Architectural and Transportation Barriers Compliance Board |
|
36 CFR 1191, App B, 105.2.1 |
BHMA A156.19-1997 |
1997 |
Power Assist and Low Energy Power Operated Doors
Archived
|
Builders Hardware Manufacturers Association |
| National Archives and Records Administration |
|
36 CFR 1234.3(c)(3) |
NFPA 42 |
1997 |
Standard for the Storage of Pyroxylin Plastic
Archived
|
National Fire Protection Association |
| National Archives and Records Administration |
|
36 CFR 1234.3(c)(5) |
NFPA 101 |
1997 |
Life Safety Code
Archived
|
National Fire Protection Association |
| National Archives and Records Administration |
|
36 CFR 1234.3(c)(2) |
NFPA 40 |
1997 |
Standard for the Storage and Handling of Cellulose Nitrate Motion Picture Film
Archived
|
National Fire Protection Association |
| Mine Safety and Health Administration |
|
30 CFR 75.818(b)(4) |
ASTM F496 |
1997 |
Standard Specification for In-Service Care of Insulating Gloves and Sleeves
Archived
|
ASTM International |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
MIL-STD-248 |
1997 |
Welding and Brazing: Procedure and Performance Qualification
Archived
|
U.S. Department of Defense |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(87) |
ASTM D2234 |
1997 |
Standard Practice for Collection of a Gross Sample of Coal
Archived
|
ASTM International |
| Coast Guard |
|
33 CFR 183.5(b) |
ASTM D2842 |
1997 |
Water Absorption of Rigid Cellular Plastics
Archived
|
ASTM International |
| Mine Safety and Health Administration |
|
30 CFR 56.14131(d) |
SAE J-386 |
1997 |
Operator Restraint Systems for Off-Road Work Machines
Archived
|
Society of Automotive Engineers |
| Mine Safety and Health Administration |
|
30 CFR 57.14130(j) |
SAE J-386 |
1997 |
Operator Restraint Systems for Off-Road Work Machines
Archived
|
Society of Automotive Engineers |
| Mine Safety and Health Administration |
|
30 CFR 57.14131(d) |
SAE J-386 |
1997 |
Operator Restraint Systems for Off-Road Work Machines
Archived
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(154) |
ASTM D4239 |
1997 |
Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 114.600(b) |
ASTM D635 |
1997 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.176-4(b) |
ASTM D751 |
1997 |
Standard Test Methods for Coated Fabrics
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.055-1(a)(4) |
ASTM D882 |
1997 |
Standard Test Method for Tensile Properties of Thin Plastic Sheeting
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 35.01-3(b) |
ASTM D93 |
1997 |
Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 3285.4(d)(1) |
ASHRAE Handbook |
1997 |
Fundamentals, Inch-Pound Edition
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Housing and Urban Development Department |
|
30 CFR 56.14130(j) |
SAE J-386 |
1997 |
Operator Restraint Systems for Off-Road Work Machines
Archived
|
Society of Automotive Engineers |
| Rural Utilities Service |
|
7 CFR 1755.503(c) |
IEEE C2 |
1997 |
National Electrical Safety Code
Archived
|
Institute of Electrical and Electronics Engineers |
| Energy Department |
|
10 CFR 434.701.1 RS-18 |
NFRC 100 |
1997 |
Procedure for Determining Fenestration Product Thermal Properties (RS-18)
Archived
|
National Fenestration Rating Council |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(11) |
ANSI/ISEA Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
Archived
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(11) |
ANSI/ISEA Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
Archived
|
International Safety Equipment Association |
| Food and Drug Administration |
|
21 CFR 172.869(b)(9) |
Food Chemicals Codex |
1997 |
Sucrose Fatty Acid Esters
Archived
|
National Academy Press |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(xi) |
ANSI Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(75) |
ANSI Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
Archived
|
American National Standards Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(e)(3) |
ACI 357-R |
1997 |
Guide for the Design and Construction of Fixed Offshore Concrete Structures
Archived
|
American Concrete Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(34) |
API MPMS |
1997 |
Chapter 11.1, Volume 1, Table 5A, Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 °
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(54) |
API RP 2T |
1997 |
Planning, Designing and Constructing Tension Leg Platforms
Archived
|
American Petroleum Institute |
| Coast Guard |
|
46 CFR 58.03-1(g)(5) |
ASTM B152 |
1997 |
Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 58.03-1(g)(7) |
ASTM D92 |
1997 |
Standard Test for Flash and Fire Points by Cleveland Open Cup
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 58.03-1(g)(8) |
ASTM D93 |
1997 |
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 430 Subpart B, App. J1, 2.6.4.5.3 |
AATCC 118 |
1997 |
Oil Repellency: Hydrocarbon Resistance Test
Archived
|
American Association of Textile Chemists and Colorists |
| Energy Department |
|
10 CFR 431.105(d)(2)(ii) |
ASTM C177 |
1997 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 430.3(c)(7) |
ANSI C78.375 |
1997 |
American National Standard for Fluorescent Lamps—Guide for Electrical Measurements
Archived
|
American National Standards Institute |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(viii) |
ASTM C1363 |
1997 |
Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 434.701.1 RS-13 |
ANSI 101/I.S. 2 |
1997 |
Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-13)
Archived
|
American National Standards Institute |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(x) |
IEC 60942 |
1997 |
Electroacoustics--Sound Calibrators, edition 2.0
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 25.01-3(b) |
ABYC A-16 |
1997 |
Electric Navigation Lights
Archived
|
American Boat and Yacht Council |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM D1835 |
1997 |
Standard Specification for Liquefied Petroleum (LP) Gases
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 11114-1 |
1997 |
Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials
Archived
|
International Organization for Standardization |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 11621 |
1997 |
Gas cylinders--Procedures for change of gas service
Archived
|
International Organization for Standardization |
| Public Health Service |
|
42 CFR 52b.12(b) |
SBCCI Standard Plumbing Code |
1997 |
International Standard Plumbing Code
Archived
|
Southern Building Code Congress International |
| Public Health Service |
|
42 CFR 52b.12(b) |
SBCCI Standard Building Code |
1997 |
Standard Building Code
Archived
|
Southern Building Code Congress International |
| Public Health Service |
|
42 CFR 52b.12(b) |
ICBO Code |
1997 |
Uniform Building Code
Archived
|
International Conference of Building Officials |
| Public Health Service |
|
42 CFR 52b.12(b) |
NFPA 101 |
1997 |
Life Safety Code
Archived
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 110.10-1(g)(9) |
IEC 60079-5 |
1997 |
Electrical Apparatus for Explosive Gas Atmospheres—Part 5: Powder Filling “q”, Second Edition
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 110.10-1(g)(23) |
IEC 60092-352 |
1997 |
Electrical Installation in Ships—Choice and Installation of Cables for Low-Voltage Power Systems, Second Edition
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ASTM D635 |
1997 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
Archived
|
ASTM International |