This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM A 276 | 1998 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 46 CFR 58.50-5 Table 58.50-5(a) | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International | |
Coast Guard | 46 CFR 111.87-3(a) | UL 484 | 1993 | Standard for Room Air Conditioners, Seventh Edition, (Revisions through and including Sep. 3, 2002) | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.120-5(d)(10) | ISO 2114:2000(E) | 2000 | Plastics (polyester resins) and paints and varnishes (binders)—Determination of partial acid value and total acid value, Third Edition | International Organization for Standardization | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(3)(iv) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.15-1(a) | IEC 60092-101 | 2002 | Electrical Installation in Ships, Part 101: Definitions and General Requirements, Edition 4.1 | International Electrotechnical Commission | |
Coast Guard | 33 CFR 126.15(a)(9) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Coast Guard | 30 CFR 57.6133(b) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 46 CFR 78.45-1(a)(2) | ASTM Adjunct F1626 | 1996 | Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01 | ASTM International | |
Coast Guard | 46 CFR 160.171-3(b) | UL 1191 | 1977 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 169.563(c) | UL 19 | 1978 | Woven Jacketed, Rubber Lined Fire Hose | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.023-1(a)(1) | MIL-S-18655C | 1971 | Signal, Smoke and Illumination, Marine, Mark 13, Mod 0. | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.105-7 | IEC 60079-0 | 2000 | Electrical apparatus for Explosive Gas Atmospheres—Part 0: General Requirements (Edition 3.1) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 58.50-5 Table 58.50-5(a) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(4) | ASTM B 127 | 1993 | Standard Specification for Nickel-Copper Alloy (UNS NO4400) Plate, Sheet, and Strip | ASTM International | |
Coast Guard | 46 CFR 183.340(i) | UL 486A | 1992 | Wire Connectors and Soldering Lugs For Use With Copper Conductors | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.30-20(d) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 15 CFR 200.112(b) | NIST SP 250 | 2012 | Calibration and Related Measurement Services of the National Institute of Standards and Technology | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 38.01-3(b) | ASTM D 4986 | 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials | ASTM International | |
Coast Guard | 46 CFR 53.01-1(c)(2) | UL 1453 | 1995 | Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.65-1 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 12.02-7(e) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 40 CFR 444.12(b)(1) Table (8) | USGS I-3765-85 | 1985 | Solids, residue suspended evaporation 105 degrees C | U.S. Geological Survey | |
Coast Guard | 46 CFR 184.240(c)(2) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 12.03-1(a)(8) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 40 CFR 444.12(b)(1) Table (7) | ASTM D 3223 | 1991 | Standard Test Method for Total Mercury in Water | ASTM International | |
Coast Guard | 46 CFR 184.240(c)(3) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.151-5(d)(2) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 114.600(b) | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Coast Guard | 46 CFR 199.05(b) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Coast Guard | 46 CFR 116.439(d) | NFPA 13 | 1978 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 2.25-5(b)(1) | IMO Resolution A.739(18) | 1993 | Guidelines for the Authorization of Organizations Acting on Behalf of the Administration | International Maritime Organization | |
Coast Guard | 46 CFR 54.01-1(c)(4) | ASTM E 23 | 1996 | Notched Bar Impact Testing of Metallic Materials | ASTM International | |
Coast Guard | 21 CFR 177.1595(c)(1) | FDA Publication | 1995 | Intrinsic Viscosity of ULTEM Polyetherimide Using Chloroform as a Solvent | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 197.550(h) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.051-5(b)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 7 CFR 1755.505(h)(1) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 111.60-3(b)(3) | MIL-HDBK-299(SH) | 1991 | Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable Notice 1-1991 (Revision of MIL-HDBK-299(SH) (1989)) | Naval Sea Systems Command | |
Coast Guard | 46 CFR 125.180(b) | UL 489 | 1995 | Molded-Case Circuit Breakers and Circuit-Breaker Enclosures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.10-1(b) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(17) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 7 CFR 1755.506(d) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 119.440(a)(3) | UL 1102 | 1992 | Non Integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 153.0(a)(2) | IMO Resolution MEPC 19(22) | 1985 | IMO International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk | International Maritime Organization | |
Coast Guard | 46 CFR 63.25-9(a) | ASTM F 1323 | 2001 | Standard Specification for Shipboard Incinerators | ASTM International | |
Coast Guard | 46 CFR 52.01-115 | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.335(a)(4) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154, Appendix B, 2.1 Note | MSC Circular 373 | 1993 | Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 160.010-3(a)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 21 CFR 172.736(b)(4) | FDA Publication | 1998 | Determination of Ethylene Oxide and 1,4-Dioxane by Headspace Gas Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services |