This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 172.736(b)(3) | AOCS Method Ca 18c-91 | 1995 | Determination of Lead by Direct Graphite Furnace Atomic Absorption Spectrophotometry | American Oil Chemists Society | |
Coast Guard | 46 CFR 160.060-5(c) | Drawing No. 160.060-1, Sheet 5 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model CYM | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Terbufos) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(9) | ASTM Annual Book of Standards | 1991 | ASTM Annual Book of Standards | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix G, Section 2.1.2 | ASTM D 3178 | 2002 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 160.051-5(b)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 75.6(b)(2) | ASME MFC-4M | 1986 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 21 CFR 177.2480(c)(3) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.27(b)(6) | AWS D1.0 | 1966 | Code for Welding in Building Construction | American Welding Society | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 12, 13(c) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(26) | ASTM D 2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Coast Guard | 46 CFR 56.25-20(b) | ASTM A 307 | 1997 | Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(e)(6) | ASTM D 4568 | 1986 | Standard Test Method for Evaluating Compatibility between Cable Filling and Flooding Compounds and Polyolefin Cable Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-28C | 1977 | Specification for L-851 Visual Approach Slope Indicators and Accessories | Federal Aviation Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.43(b)(1) | NCRP Report No. 102 | 1989 | Medical X-ray, Electron Beam, and Gamma-Ray Protection for Energies Up to 50 MeV (Equipment Design, Performance, and Use) | National Council on Radiation Protection and Measurement | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(32) | ASTM E 308 | 1966 | Standard Practice for Spectrophotometry and Description of Color in CIE 1931 System | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | USGS O-2002-01 | 2001 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides and Selected Degradates in Water by C-18 Solid-Phase Extraction and GC/MS | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption, Revision 3.0 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154.106(f)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 59.412(b)(3) | ASTM D 1640 | 1983 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International | |
Energy Department | 10 CFR 430.3(k)(4) | IES LM-20 | 1994 | Method for Photometric Testing of Reflector-Type Lamps | Illuminating Engineering Society of North America | |
Occupational Safety and Health Administration | 29 CFR 1926.6(x)(2) | ISO 11660-2:1994(E) | 1994 | Cranes—Access, guards and restraints—Part 2: Mobile cranes | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (34) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Total Trihalomethanes) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(viii) | ASME MFC-18M | 2001 | Measurement of Fluid Flow Using Variable Area Meters | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.171-3(b) | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0024 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 58 Appendix D, 6.0(5) | EPA-454-R-92-009 | 1997 | Guidance for Conducting Ambient Air Monitoring for Lead Around Point Sources | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.602(b)(3) | PCSA 1 | 1968 | Mobile Crane and Excavator Standards | Power Crane and Shovel Association | |
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 761.19(a)(3) | ASTM D 240 | 1987 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 160.151-21(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1113 | 1997 | Electrically Operated Pumps for Nonflammable Liquids, Marine, Third Edition | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Food and Drug Administration | 21 CFR 177.1020(d)(2) | FDA Publication | 1987 | Extracted Acrylonitrile Monomer by Differential Pulse Polarography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 21 CFR 172.167(d)(2) | HCC Publication | 1991 | Manual from the Hydrogen Peroxide Test Kit, Model HYP-1, Catalog Number 22917-00 | Hach Chemical Company | |
Research and Special Programs Administration | 49 CFR 195.3(c) E2 | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME B16.15 | 1985 | Cast Bronze Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 306B, Section 6.2 | ASTM D 1331 | 1989 | Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. F, 3.2.3 | IEC 62301 | 2005 | Household electrical appliances—Measurement of standby power | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.135-5(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.185(c) | Drawing No. 175-4000 | 2009 | Thorax Assembly with Rib Extensions | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(ii) | USGS Open File Report (OFR) 91-519 | 1992 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Organonitrogen Herbicides in Waster by Solid-Phase Extraction and Capillary-Column Gas Chromatography/Mass Spectrometry with Selected-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency |