This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.023-1(a)(1) | MIL-S-18655C | 1971 | Signal, Smoke and Illumination, Marine, Mark 13, Mod 0. | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(39) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429e | 1971 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(8) | SAE J-319b | 1971 | Self-Propelled Scrapers | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(13) | SAE J-395 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(v) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 62.15265(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(h)(1) | IEEE 279 | 1971 | Criteria for Protection Systems for Nuclear Generating Stations | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.124(b)(4)(iv) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(9) | SAE J-320a | 1971 | Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.97(b)(3) | RUS Bulletin 345-54, PE-52 | 1971 | Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.890(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(17) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(13) | ASTM D 484 | 1971 | Standard Specification for Hydrocarbon Drycleaning Solvents | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 61.18(a)(10) | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(Q) | EPA Method 352.1 | 1971 | Nitrogen, Nitrate, Colorimetric, Brucine | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
Environmental Protection Agency | 40 CFR 147.1851(b)(1) | OKUIC regulations | 1971 | Oklahoma Statutes, title 17 sections 51-53; title 52 sections 86.1-86.5, 139-153, 243, 307-318.1 | State of Oklahoma | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-17A | 1971 | Standby Power for Non-FAA Airport Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 173.420(a)(1) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Consumer Product Safety Commission | 16 CFR 1505.5(h)(2) | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995a | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.420(a)(2)(i) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(B) | EPA Method 130.1 | 1971 | Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.171-17(o) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Rural Utilities Service | 7 CFR 1728.97(a)(16) | RUS Bulletin 50–60 (T–9) | 1971 | RUS Specification for Single Pole Steel Structures Complete with Arms | Rural Utilities Service, U.S. Department of Agriculture | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(3) | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (27) | EPA Method 130.1 | 1971 | Hardness - Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.301 S7.1.1 | ASTM D 484 | 1971 | Standard Specifications for Hydrocarbon Dry Cleaning Solvent | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-17A | 1971 | Standby Power for Non-FAA Airport Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (57) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Coast Guard | 7 CFR 1755.390(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Consumer Product Safety Commission | 16 CFR 1505.6(e)(3)(iv) | ANSI C101.1 | 1971 | Standard for Leakage Current for Appliances | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 213.1 | 1971 | Cadmium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(19) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M071 | 1970 | Left arm assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Consumer Product Safety Commission | 16 CFR 1201.4(b)(3)(ii) | ASTM D 2565 | 1970 | Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With or Without Water for Exposure of Plastics | ASTM International |