This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.01-2(d)(12) | ASME B16.18 | 2001 | Cast Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 182.130 | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Coast Guard | 29 CFR 1918.103(b)(2) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 162.060-34(f)(1) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IG (Dazomet) | EPA Method 1659 | 2014 | The Determination of Dazomet in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 101.120(a)(1) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 11 | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(d)(8) | ISO 1675-1985(E) | 1985 | Plastics—Liquid resins—Determination of density by the pyknometer method, Second Edition | International Organization for Standardization | |
Coast Guard | 33 CFR 101.120(a)(2) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 11 | International Maritime Organization | |
Coast Guard | 46 CFR 160.174-17(i) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IH (5) | ASTM D 5392 | 1993 | Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(5)(iii) | IMO MSC Circular 1006 | 2001 | Guidelines On Fire Test Procedures For Acceptance Of Fire-Retardant Materials For The Construction Of Lifeboats | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(2) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 361 | 1995 | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings | ASTM International | |
Coast Guard | 46 CFR 183.320(e) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.30-10(b)(3) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 27.211(e)(2)(v)(A) | SAE J-1475 | 1984 | Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(19) | ASTM A 234/A 234M | 1997 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures | ASTM International | |
Coast Guard | 46 CFR 160.002-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 53.01-1(b)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-25(b)(6) | SAE J-1942 | 1989 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 25.45-2(b)(1) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 77.01-3(b) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Coast Guard | 46 CFR 164.023-3(b)(2) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 54.25-20(c) | ASME B&PV Code | 1997 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 27 CFR 21.41(b)(1) 241 | The United States Pharmacopoeia | 1980 | Formula No. 13-A | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 184.240(e)(2) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1990 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 57.02-3(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 142.27(c) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 16 | 1992 | Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines | ASTM International | |
Coast Guard | 46 CFR 111.105-15(c) | IEC 60079-7 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 7: Increased Safety “e”, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 160.055-1(a)(5) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Coast Guard | 21 CFR 172.320(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 15.1105(c)(1) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-15 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 15: Type of Protection “n”, Second Edition | International Electrotechnical Commission | |
Coast Guard | 21 CFR 102.23(c)(6) | AOAC Official Methods | 1980 | Offical Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 115.810(b)(1) | NFPA 10 | 1994 | Portable Fire Extinquishers | National Fire Protection Association | |
Coast Guard | 46 CFR 148.220(c) | UN Manual of Tests and Criteria | 2009 | Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fifth revised edition | United Nations | |
Coast Guard | 21 CFR 172.723(b)(3) | Food Chemicals Codex | 1996 | Epoxidized Soybean Oil | National Academy Press | |
Coast Guard | 46 CFR 110.10-1(k)(5) | NEMA Publication WC-3 | 1992 | Rubber Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 160.151-31(d) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 111.60-2 | IEC 60332-3-22 | 2000 | Tests on Electric Cables Under Fire Conditions—Part 3-22: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables—Category A, First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.077-5(b) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.010-1(c)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 39.3001(g) | OCIMF Publication | 2006 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 160.151-21(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 111.52-5(b) | DDS 300-2 | 1988 | AC Fault Current Calculations | Naval Sea Systems Command | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | Federal Standard CCC-T-191 | 1978 | Textile Test Method 5670 | Federal Specifications Standards and Test Methods |