This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 21 CFR 176.170(b)(2) | FDA Publication | 1989 | Determination of Free Phenol in Cyclized Rubber Resin | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 65.147(b)(3)(ii) | ASTM D 1946 | 1977 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 91, Subpart D, Appendix A, Table 3 | ASTM D 1319 | 1989 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(125) | ASTM D 3246 | 1981 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.507(b)(2) | NFPA 10 | 2002 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 164.023-7(a)(3) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA | APHA Method 9221 E | 1999 | Fecal Coliform Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, C3 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.68(b)(12) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 56.14130(b)(2) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Coast Guard | 21 CFR 145.125(b)(2)(ii) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | APA 87-1 | 2001 | Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics | American Pyrotechnics Association | |
Coast Guard | 46 CFR 182.130 | ABYC H-25 | 1994 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(182) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Coast Guard | 46 CFR 160.062-3(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Terbutryn) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(b)(10) | APHA Method 6230 B | 2014 | Not found | American Public Health Association | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 2.1.2 | ASTM D 1945 | 2001 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 56.30-10(b)(5) | ASTM A 36/A 36M | 1997 | Standard Specification for Carbon Structural Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 13, 1(b) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) 2002 EPA/AP | ASTM International | |
Coast Guard | 33 CFR 126.15(a)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | FedSpec WW-P-541E/GEN | 1980 | Plumbing Fixtures (General Specifications) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart X | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iv) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.300-9(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Housing and Urban Development Department | 24 CFR 3280.208(a) | UL 268 | 1999 | Smoke Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Public Health Service | 42 CFR 37.44(g) | AAPM Report No. 74 | 2002 | Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(37) | ASTM G 151 | 1997 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (34) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | USGS I-3270-85 | 1985 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | AA ASM 35 | 1980 | Aluminum Sheet Metal Work in Building Construction | Aluminum Association | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM E 330 | 1979 | Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (7) | ASTM D 4382 | 2002 | Barium by Graphite Furnace Atomic Absorption | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(14) | MSS SP-73 | 1996 | Brazing Joints for Copper and Copper Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Energy Department | 10 CFR 430.3(c)(8) | ANSI C78.901 | 2005 | Electric Lamps--Single-Based Fluorescent Lamps--Dimensional and Electrical Characteristics | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(6) | NFPA 385 | 1966 | Standard for Tank Vehicles for Flammable and Combustible Liquids | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (35) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(h)(13)(i) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(xiii) | API MPMS | 2005 | Chapter 22—Testing Protocol, Section 2—Differential Pressure Flow Measurement Devices, First Edition | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 106.30(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 58 Appendix D, 4.1(i) | EPA-454-R-98-001 | 1998 | Guideline for Selecting and Modifying the Ozone Monitoring Season Based on an 8-Hour Ozone Standard | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 33 CFR 183.516(b) | ASTM D 1621 | 1994 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) B5 | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 600.311-12(c)(2)(ii) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.6 | ASTM D 4052 | 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International |