This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.58b(c)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102 code/special provisions 370 | Manual of Tests and Criteria | 2019 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Rural Utilities Service | 7 CFR 1755.910(d)(3)(xv) | ASTM A 525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(8)(iv) | ANSI B30.2.0 | 1967 | Safety Code for Overhead and Gantry Cranes | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(6)(ii)(G) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(4) | ASTM A 391 | 1965 | Alloy Steel Chain | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(j)(1) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Coast Guard | 46 CFR 111.60-5(a)(2) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(66) | ANSI Z535.1 | 2011 | Safety Colors | American National Standards Institute | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 139 | 1996 | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) | ASTM International | |
Coast Guard | 46 CFR 111.105-39(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Rural Utilities Service | 7 CFR 1755.390(i)(5)(vii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.116b(e)(3)(ii) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(97) | ASTM D 2504 | 1967 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(a)(5) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Coast Guard | 46 CFR 164.013-3(a) | UL 1191 | 1995 | Standards for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note 1 | APHA Method 9221 D | 1999 | Presence-Absence (P-A) Coliform Test | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, B | ISO 9408:1999(E) | 1999 | Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of Oxygen Demand in a Closed Respirometer. Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 65.147(b)(3)(ii) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.945(a)(1)(iv) | ASTM D 3936 | 1980 | Standard Test Method for Delamination Strength of Secondary Backing of Pile Floor Coverings | ASTM International | |
Food and Drug Administration | 21 CFR 131.206(e)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.060-3(d) | MIL-T-43566 | 1990 | Military Webbing | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (vii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly, left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Terbacil) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(11)(iii) Footnote 2 | APHA Method 6230B | 2014 | Not found | American Public Health Association | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.1(a) | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(47) | ASTM B 43 | 1996 | Standard Specification for Seamless Red Brass Pipe | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 5, 4(e) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 52, Subpart YY | WISIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Wisconsin | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 101A, 7.1.1 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 98.324(e)(5) | ASME MFC-11M | 2006 | Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | UL 17 | 1988 | Stack and Damper, Oil-fueled | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 147.1550(a)(1) | NJUIC regulations | 1990 | Water Pollution Control Act, New Jersey Statutes Annotated sections 58:10A-1 through 58:10A-20 | State of New Jersey | |
Research and Special Programs Administration | 21 CFR 184.1009(b) | Food Chemicals Codex | 1981 | Adipic Acid | National Academy Press | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(42) | ASTM D 6615 | 2011 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(94) | ASTM D 2369 | 1995 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1963 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(B) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(26) | ASTM E 4 | 2003 | Standard Practices for Force Verification of Testing Machines | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Odor) | APHA Method 2150 B | 1992 | Odor, Threshold Odor Test | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1)(iv) | Drawing No. 880105-450 | 2000 | Lower Torso Assembly | Reprographic Technologies | |
Energy Department | 10 CFR 430.3(i)(2) | CIE 15 | 2004 | Technical Report: Colorimetry, 3rd edition | International Commission on Illumination | |
Occupational Safety and Health Administration | 29 CFR 1926.6(m)(2) | ANSI/AWS D14.3 | 1994 | Specification for Welding Earthmoving and Construction Equipment | American Welding Society | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (33) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Simazine) | EPA Method 551.1 | 1995 | Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(iv) | ASME MFC-6M | 2005 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix C, 5.1 | EPA-450-4-83-005 | 1983 | Guideline for Particulate Episode Monitoring Methods, EPA Contract No. 68-02-3584 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1918.24(g)(3) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute |