This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.132-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 14596 | 2007 | Petroleum products--Determination of sulfur content--Wavelength-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
Coast Guard | 33 CFR 118.3(c) | FHWA Publication | 1966 | Standard Alphabets for Highway Signs | Federal Highway Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.047-3(f) | MIL-T-43566 | 1991 | Military Webbing | U.S. Department of Defense | |
Coast Guard | 46 CFR 170.270(c)(1) | ASTM F 1196 | 1994 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Coast Guard | 46 CFR 160.135-5(d)(5) | IMO MSC/Circular 980 | 2001 | Standardized life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(o) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 54.25-3 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.261(s) Silvery iron | ASTM A 100 | 1974 | Standard Specification for Ferrosilicon | ASTM International | |
Coast Guard | 46 CFR 160.151-15(i) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(e)(3) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.077-5(b) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 60.335(a)(5) | EPA Method 1 | 2014 | Sample and Velocity Traverses for Stationary Sources | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 42 | 1996 | Standard Specification for Seamless Copper Pipe, Standard Sizes | ASTM International | |
Coast Guard | 46 CFR 160.170-5(c)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 21 CFR 172.785(b)(1) | FDA Publication | 2003 | Determination of Potency of LMP-102 | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 162.060-34(f)(1) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 101.120(a)(1) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 11 | International Maritime Organization | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(9)(ii) | EPA-600-4-79-020 | 1983 | Method 245.2--Automated Cold Vapor Technique | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 169 | 1977 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 164.120-5(d)(8) | ISO 1675-1985(E) | 1985 | Plastics—Liquid resins—Determination of density by the pyknometer method, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 113.30-25(j)(2) | IEC 60331-11 | 1999 | Tests for electric cables under fire conditions—Circuit integrity—Part 11: Apparatus—Fire alone at a flame temperature of at least 750 °C, First Edition | International Electrotechnical Commission | |
Coast Guard | 33 CFR 101.120(a)(2) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 11 | International Maritime Organization | |
Coast Guard | 10 CFR 430 Subpart B, App. A, 5.1 | AHAM HRF-1 | 2008 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 160.077-19(d)(4) | ASTM D 1434 | 1988 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(5)(iii) | IMO MSC Circular 1006 | 2001 | Guidelines On Fire Test Procedures For Acceptance Of Fire-Retardant Materials For The Construction Of Lifeboats | International Maritime Organization | |
Coast Guard | 21 CFR 136.160(a)(5) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 58.03-1(g)(2) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 111.12-7(c) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 183.320(e) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.30-10(b)(3) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 113.25-11(a) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1996 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 53.01-1(b)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-25(b)(6) | SAE J-1942 | 1989 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 12.01-3(b)(2) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.050-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5650 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 164.023-3(b)(2) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 184.240(e)(2) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(14)(i) | EPA-600-4-91-010 | 1994 | Method 200.8--Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 120.410(d) | UL 1572 | 1995 | High Intensity Discharge Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 7 CFR 1755.390(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 139.130(b)(3) | ISO 9001:2008(E) | 2008 | International Standard: Quality management systems—Requirements | International Organization for Standardization | |
Coast Guard | 27 CFR 21.63(a) | National Formulary | 1980 | Formula No. 36 | U.S. Pharmacopeial Convention | |
Coast Guard | 21 CFR 131.149(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 33 CFR 183.516(a)(2) | MIL-P-21929B | 1970 | Plastic Material, Cellular, Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot) | U.S. Department of Defense | |
Coast Guard | 33 CFR 142.27(c) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 56.01-2(d)(12) | ASME B16.18 | 2001 | Cast Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 34.01-15(b)(1) | ASTM F 1121 | 2010 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Coast Guard | 24 CFR 3280.805(a)(3)(iv) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association |