This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(5)(ii) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147.51(a)(1) | ALUIC regulations | 1980 | Alabama Water Pollution Control Act, Code of Alabama 1975, sections 22-22-1 through 22-22-14 | State of Alabama | |
Research and Special Programs Administration | 49 CFR 180.509(g)(ii) Table Note 2 | AAR Specification M-1002 | 1992 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Coast Guard | 46 CFR 160.132-7(b)(1)(ii) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(3) | NHTSA Publication | 2008 | Procedures for Assembly, Disassembly and Inspection (PADI) of the EuroSID-2re 50th Percentile Adult Male Side Impact Crash Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-I B | 2000 | Radioactive Iodine-Percipitation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1266 | 1987 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 78 | 1978 | Polyethylene (PE), Acrylonitrile Butadiene Styrene (ABS), Poly Vinyl Chloride (PVC) and Polybutylene (PB) Plastic Piping for Domestic Cold Water Service | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 | ASTM D 2369 | 1990 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.3.1 | ASTM D 2234 | 2000 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(e)(37) | ASTM E 359 | 2005 | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) | ASTM International | |
Health and Human Services Department | 45 CFR 162.1102(b)(2)(i) | NCPDP Publication | 2012 | Batch Standard Batch Implementation Guide, Version 1, Release 2 | National Council for Prescription Drug Programs | |
National Highway Traffic Safety Administration | 49 CFR 571.201 S5.1.2 | SAE J-921 | 1965 | Recommended Practice for Instrument Panel Laboratory Impact Test Procedure | Society of Automotive Engineers | |
Veterans Affairs Department | 38 CFR 51.200(a) | NFPA 101 | 2006 | Life Safety Code | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(17) | EPA Method 549 | 1990 | Determination of Diquat and Paraquat in Drinking Water by Liquid-Solid Extraction and HPLC with Ultraviolet Detection | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 114.600(b) | ABS Publication | 1997 | Guide for Building and Classing High Speed Craft | American Bureau of Shipping | |
Food and Drug Administration | 21 CFR 177.1390(c)(3)(i)(B)(2) | FDA Publication | 1996 | Determination of Non-Volative Chloroform Soluble Residues in Retort Pouch Water Extractives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 175.300(b)(3)(xix) | FDA Publication | 2004 | Method for Determination of Intrinsic Viscosity of Maleic Anhydride Adduct of Crystalline Polypropylene | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 32.01-1(b)(1) | ABS Publication | 1989 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (13) | ASTM B 117 | 1979 | Standard Method of Salt Spray (Fog) Testing | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 36 CFR 1235.4(c)(2) | ISO/IEC 16382 | 2000 | Information Technology--Data Interchange on 12.7 mm 208-track Magnetic Tape Cartridges--DLT 5 Format | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F D | 1997 | Fluoride by SPADNS Method | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-574B | 1976 | Insulation, Thermal (Perlite) | Federal Specifications Standards and Test Methods | |
Mine Safety and Health Administration | 30 CFR 56.13030(b)(1) | ASME B&PV Code | 1977 | Boiler and Pressure Vessel Code, Sections I-VII | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.522(a)(9) | IEEE 730 | 1989 | Standard for Software Quality Assurance Plans | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 430.3(c)(17) | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | ASME OM Code | 2004 | Code for Operation and Maintenance of Nuclear Power Plants | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.200(i) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (53) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(vi) | ISDSI 105 | 1980 | Test Procedures and Acceptance Criteria for Physical Endurance for Steel Doors and Hardware Reinforcings | Insulated Steel Door Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(K) | EPA Method 629 | 1993 | Cyanazine by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | ASTM D 5673 | 1996 | Standard Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(g)(5) | SAE J-1892 | 1993 | Recommended Practice for Bar-Coded Vehicle Emission Configuration Label | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 200.946(a)(1)(viii) | ASTM E 695 | 1991 | Standard Method of Measuring Relative Resistance of Wall, Floor and Roof Construction to Impact Loading | ASTM International | |
Food and Drug Administration | 21 CFR 181,32(b) | FDA Publication | 1989 | Gas-Solid Chromatographic Procedure for Determining Acrylonitrile Monomer in Acrylonitrile-Containing Polymers and Food-Simulating Solvents | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(15)(iv) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.800 | IAUIC regulations | 2014 | State of Iowa-administered program (Reserved) | State of Iowa | |
Environmental Protection Agency | 40 CFR 63.404(a) | EPA SW-846 | 1987 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Revision 1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 192/A 192M | 1996 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.55(d)(3) | CGA C-3 | 1994 | Standard for Welding on Thin-Walled Steel Cylinders | Compressed Gas Association | |
Federal Aviation Administration | 14 CFR 152.11(b) | 150/5390-1A | 1969 | Heliport Design Guide | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 40 CFR 60.564(j)(1) | ASTM D 2908 | 1991 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 268.7(b)(1) | EPA Method 1311 | 2014 | Toxicity Characteristic Leaching Procedure | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.26(c) | SAE J-594 | 2003 | Reflex Reflectors | Society of Automotive Engineers | |
Coast Guard | 46 CFR 52.15-5(b) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | APHA Method 4110 C | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (11) | ASTM D 4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Energy Department | 10 CFR 431.105(b) | CSA 4.3a-M | 2000 | Addenda to Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | Canadian Standards Association |