This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | ASTM D 516 | 1990 | Standard Test Method for Sulfate Ion in Water | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(viii) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section XI, Division 1, Subsection IWL, 1992, 1995, 1998, and 2001 editions and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.53(a) | 10 CFR Part 20 | 2014 | Protection Against Radiation | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (40) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 900.0 | 1980 | Gross Alpha and Gross Beta Radioactivity | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(e)(1)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.179(a)(43) Note | ANSI B30.9 | 1971 | Safety Code for Slings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 59.505(d) | CAARB Method 310 | 2005 | Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products | California Air Resources Board | |
Housing and Urban Development Department | 24 CFR 3280.403(d)(2) | ASTM E 774 | 1997 | Standard Specifications for Sealed Insulating Glass Units | ASTM International | |
Federal Communications Commission | 47 CFR 15.38(b)(13) | CEA 766-A | 2001 | U.S. and Canadian Region Rating Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information using ATSC A/65-A Program and System Information Protocol (PSIP) | Consumer Technology Association | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D 4101 | 1988 | Standard Specification for Propylene Plastic Injection and Extrusion Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.345-7(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-1E | 1977 | Approved Airport Lighting Equipment (Through change 1, 1977) | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (6) | USGS I-3060-85 | 1989 | Arsenic Silver diethyl dithiocarbamate | U.S. Geological Survey | |
Coast Guard | 46 CFR 111.81-1(d) | UL 50 | 1995 | Standard for Enclosures for Electrical Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.485(d)(1) | ASTM E 169 | 1977 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 80.165(b) | ASTM D 5500 | 1998 | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Fuel for Intake Valve Deposit Formation | ASTM International | |
Coast Guard | 46 CFR 169.703(c)(5)(iv) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 183.340(i) | UL 486A | 1992 | Wire Connectors and Soldering Lugs For Use With Copper Conductors | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN E | 1995 | Cyanide by Colorimetric Determination | American Public Health Association | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.7.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Environmental Protection Agency | 40 CFR 1036.530(b)(1) | ASTM D 5291 | 2010 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 14 | Quanti-Tray®/2000 Method | 2002 | Quanti-Tray®/2000 Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(9) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Federal Highway Administration | 23 CFR 655.601(c) | AASHTO Publication | 1993 | Traffic Engineering Metric Conversions Factors, Addendum to the Guide to Metric Conversion | American Association of State Highway and Transportation Officials | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(iii) | ANSI B31.5 | 1966 | Refrigeration Piping | American National Standards Institute | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM D 1434 | 1988 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
Environmental Protection Agency | 40 CFR 147.650(a)(8) | IDUIC regulations | 1977 | Idaho Trade Secrets Act, Title 48, Chapter 8, Idaho Code, sections 48-801 through 48-807 (Bobbs-Merrill 1977 and Supp. 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63.10005(i)(4)(ii) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Food and Drug Administration | 15 CFR 1150.3(b) | Federal Standard 595A | 1987 | Color 12199, Blaze Orange | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 571.205 S5.4 | ANSI/SAE Z26.1 | 1996 | Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320b | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Prime Movers | Society of Automotive Engineers | |
Coast Guard | 46 CFR 111.70-3(a) | NEMA Standards Publication ICS 2 | 2000 | Industrial Control and Systems Controllers, Contactors, and Overload Relays, Rated 600 Volts | National Electrical Manufacturers Association | |
Research and Special Programs Administration | 49 CFR 195.205(b)(1) | API 653 | 2003 | Tank Inspection, Repair, Alteration, and Reconstruction | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 177.2210(b)(3) | FDA Publication | 1993 | Hypalon Synthetic Rubber--Determination of Sulfur by Parr Bomb | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 92.508(b) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 46 CFR 164.023-7(a)(1) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 45 CFR 162.1203(a)(6) | CAQH Publication | 2011 | Phase I CORE 157: Eligibility and Benefits System Availability Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 116.300(b)(1)(ii) | ABS Publication | 1975 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | ANSI B31.1 | 1986 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(i) | Drawing No. 86-5001-001 | 1996 | Leg Assembly, Complete | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (68) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 189.110(c) | AOAC Journal | 1973 | Flavors and Nonalcoholic Beverages, Vol. 56, No. 5, pages 1281-1283 | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 193.2013(a)(1) | AGA Publication | 2001 | Purging Principles and Practices | American Gas Association | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 171 | 2014 | Hazardous Materials Regulations, General Information, Regulations, and Definitions | U.S. Department of Transportation |