This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.47(m)(6) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Environmental Protection Agency | 40 CFR 80.1451(b)(1)(ii)(T) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Food and Drug Administration | 40 CFR 1065.701 Table 1 | ASTM D 1655 | 2013 | Standard Specification for Aviation Turbine Fuels | ASTM International | |
Coast Guard | 46 CFR 162.018-1(b)(2)(i) | CGA S-1.2.5.2 | 2013 | Flow test data for safety and relief valves for use on pressure vessels | Compressed Gas Association | |
Federal Communications Commission | 47 CFR 15.31(a)(3) | ANSI C63.10-2013 | 2013 | American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.157 (4) | NFPA Publication | 2013 | NFPA Handbook | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.1625(d)(1)(iii) | ASTM D 7520 | 2013 | Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere | ASTM International | |
Environmental Protection Agency | 40 CFR 80.47(p)(3)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Environmental Protection Agency | 40 CFR 600.011(b)(1) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(a)(2)(ii) | API MPMS | 2013 | Chapter 5, Section 6 | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1060 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 85 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 80.46(c)(1) | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Coast Guard | 40 CFR 1065.701 Table 1 | ASTM D 2880 | 2013 | Standard Specification for Gas Turbine Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 613 | 2013 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1048 | SAE J2841_200903 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AITC All Standards | 2013 | All specifications, standards and codes without specific reference | American Institute of Timber Construction | |
Mine Safety and Health Administration | 30 CFR 77.411 | ASME B&PV Code | 2013 | Boiler and Pressure Vessel Code, Sections I-VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 71.5 | FAA Order 7400.9X | 2013 | Airspace Designations and Reporting Points | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1065 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Federal Aviation Administration | 24 CFR 200.927 | HUD MPS | 2013 | Minimum Property Standards as contained in the handbooks identified in 24 CFR 200.929(b) | U.S. Department of Housing and Urban Development | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(93) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 86.1910(c)(6) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1211.8 (f) | UL 1998 | 2013 | Standard for Safety: Software in Programmable Components | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 4815 | 2013 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | CISPI All Standards | 2013 | All specifications, standards and codes without specific reference | Cast-Iron Soil Pipe Institute | |
Environmental Protection Agency | 40 CFR 80.47(m)(7) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 2713 | 2013 | Standard Test Method for Dryness of Propane (Valve Freeze Method) | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.503-1 | ICEA Publication | 2013 | Standards | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 80.1454(l) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 162.018-7(a) | CGA S-1.2.5.2 | 2013 | Flow test data for safety and relief valves for use on pressure vessels | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(30) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1625(d)(1)(iv) | ASTM D 7520 | 2013 | Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere | ASTM International | |
Environmental Protection Agency | 40 CFR 80.47(p)(3)(ii) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1033 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Energy Department | 88 FR 28780 | 10 CFR 429 | ANSI/ASHRAE 41.10–2013 | 2013 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Minerals Management Service | 30 CFR 250.1202(a)(2)(iii) | API MPMS | 2013 | Chapter 5, Section 8 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(20) | ASTM D 2699 | 2013 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
Energy Department | 87 FR 45164 | 10 CFR 431 | ANSI/ASHRAE Standard 198–2013 | 2013 | Energy Conservation Program: Test Procedure for Direct Expansion-Dedicated Outdoor Air Systems | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Mine Safety and Health Administration | 30 CFR 57.2 Explosives | 49 CFR 173.53 | 2013 | Provisions for using old classifications of explosives. | U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 77.503-1 | NEMA Publication | 2013 | Standards | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(1) Table 1 | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(205) | ASTM E 2618 | 2013 | Standard Test Method for Measurement of Particulate Matter Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(b)(3) | ASTM D 93 | 2013 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(1)(i) | ANSI K61.1 | 2013 | Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(c) | EPA SW-846-3050 | 2013 | Acid Digestion of Sediments, Sludges, and Soils | U.S. Environmental Protection Agency | |
Minerals Management Service | 30 CFR 250.1202(f)(1)(ii) | API MPMS | 2013 | Chapter 12, Section 2, Part 4 | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AISI All Standards | 2013 | All specifications, standards and codes without specific reference | American Iron and Steel Institute | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 1042 | ASTM D93–13 | 2013 | Fuels Regulatory Streamlining | ASTM International |
Environmental Protection Agency | 40 CFR 80.47(e)(1) | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International |