This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(i)(C) | 29 CFR 1910.253(b)(1)(ii) | 2013 | Cylinders and Containers, Approval and Marking | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 80.47(m)(3) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Environmental Protection Agency | 40 CFR 80.1426(f)(17)(i) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 17 | 2013 | Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 11119–3:2013(E) | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 87 FR 44944 | 49 CFR 171 | ISO 10462:2013 | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 63.1625(b)(9) | ASTM D 7520 | 2013 | Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | ISO 3449 | 2013 | Earth-moving machinery -- Falling-object protective structures -- Laboratory tests and performance requirements | International Organization for Standardization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1036 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 80.47(o)(2)(iii) | ASTM D 6792 | 2013 | Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories | ASTM International | |
Coast Guard | 46 CFR 162.018-7(a) | CGA S-1.2.5.2 | 2013 | Flow test data for safety and relief valves for use on pressure vessels | Compressed Gas Association | |
Coast Guard | 46 CFR 175.800(b) | COMDTINST M16714.3 (Series) | 2013 | Equipment Lists, Items Approved, Certificated or Accepted under Marine Inspection and Navigation Laws | U.S. Coast Guard | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1048 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 197.204, ANSI Code1 | ANSI B31.1 | 2013 | Code for Pressure Piping | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 80.177(d)(1)(ii) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(ii) | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.13001 | ASME BPVC | 2013 | Boiler and Pressure Vessel Code, Sections I-VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1065.701 Table 1 | ASTM D 5797 | 2013 | Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 7039 | 2013 | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 80.47(r)(1)(x) | ASTM D 7039 | 2013 | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 63 | ASTM D613–13 | 2013 | Fuels Regulatory Streamlining | ASTM International |
Environmental Protection Agency | 40 CFR 80.1401 Non-ester renewable diesel (1) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(b)(14) | ASTM D 3231 | 2013 | Standard Test Method for Phosphorus in Gasoline | ASTM International | |
Transportation Department | 87 FR 44944 | 49 CFR 173 | ISO 11119–3:2013(E) | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Federal Trade Commission | 85 FR 20788 | 16 CFR 460.5 (e)(2)(i) | ASTM C 177-13 | 2013 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1030 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 80.47(m)(4) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Environmental Protection Agency | 40 CFR 80.1430(e)(2) | ASTM D 6866 | 2013 | Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | ASHRAE All Standards | 2013 | All specifications, standards and codes without specific reference | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(1) Table 1 | ASTM D 2699 | 2013 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(12) | ASTM D 1655 | 2013 | Standard Specification for Aviation Turbine Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 80.47(p)(1)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(d)(1) | AAI-RMA Specification | 2013 | Specifications for Anhydrous Ammonia Hose | Agriculture Ammonia Institute-Rubber Manufacturers Association | |
Environmental Protection Agency | 40 CFR 80.47(p)(2)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.801(b) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.120, Appendix C, 2 | COMDTINST M16465.3 | 2013 | Policy Guidance for Response to Hazardous Chemical Releases | U.S. Coast Guard | |
Energy Department | 87 FR 45164 | 10 CFR 431 | ANSI/ASHRAE Standard 41.1–2013 | 2013 | Energy Conservation Program: Test Procedure for Direct Expansion-Dedicated Outdoor Air Systems | American National Standards Institute |
Environmental Protection Agency | 40 CFR 80.2(z)(1), Aromatic content | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Environmental Protection Agency | 85 FR 41100 | 40 CFR 63 | ASTM D5965–02(2013) | 2013 | NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn... | ASTM International |
Environmental Protection Agency | 40 CFR 80.177(a)(5) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(202) | ASTM E 871 | 2013 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Environmental Protection Agency | 85 FR 10828 | 40 CFR 63 | ASTM D1475–13 | 2013 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans and Surface Coating of Metal Coil Residual Risk and Technology Reviews | ASTM International |
Minerals Management Service | 30 CFR 250.1202(a)(2)(i) | API MPMS | 2013 | Chapter 4, Section 8 | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 29978 | 40 CFR 60 | ASTM D5965-02(2013) | 2013 | Review of Standards of Performance for Automobile and Light Duty Truck Surface Coating Operations | ASTM International |
Environmental Protection Agency | 40 CFR 63.1510(f)(4) | ASTM D7520-13 | 2013 | Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.2 Explosive | 49 CFR 173.53 | 2013 | Provisions for using old classifications of explosives | U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.1(d)(2) | 29 CFR 1910.106 | 2013 | Flammable and Combustible Liquids Code | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 80.47(a)(10) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1203.17(a)(3) | FMVSS 218 | 2013 | Motorcycle Helmets | U.S. Department of Transportation | |
Food and Drug Administration | 40 CFR 1065.701 Table 1 | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International |