This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 111.105-15(b) | IEC 79-6 | 1995 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
Coast Guard | 40 CFR 136.3(a) Table IF (Chloroform) | EPA Method 551 | 1990 | Chlorination Disinfection Byproducts, Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.10-1(o)(11) | UL 1042 | 1994 | Electric Baseboard Heating Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.005-3(a) | MIL-B-2766B | 1967 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.002-1(b) | DWG No. F-49-6-1 (Sheet 2) | 2012 | Pad Detail (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 111.60-5(a)(2) | IEC 60092-352 | 1997 | Electrical Installation in Ships—Choice and Installation of Cables for Low-Voltage Power Systems, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 27.101 Fixed Fire-Extinquishing Systems (3) | NFPA 750 | 2003 | Standard on Water Mist Fire Protection Systems | National Fire Protection Association | |
Coast Guard | 33 CFR 183.540(d) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.01-2(k)(10) | MSS SP-61 | 2003 | Pressure Testing of Steel Valves | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 54.25-10(b)(1)(i) | ASTM A 20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 160.052-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 108.645(a)(4) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-45 | 2003 | Bypass and Drain Connection Standard | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 169.703(c)(5)(i) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 40 CFR 136.3(a) Table IG (Alachlor) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IH (7) | ASTM D 6503 | 1999 | Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure | ASTM International | |
Coast Guard | 46 CFR 56.30-10(b)(5) | ASME B16.5 | 2003 | Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.060-5(b) | Drawing No. 160.060-1, Sheet 2 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CYM | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.151-27(c)(1) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Coast Guard | 46 CFR 160.176-9(a)(10) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.077-29(c)(5) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 92-201 | 1994 | Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 63.05-1(f)(2) | ISO 10396 | 2007 | Stationary source emissions—Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems, Second edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.133-21(a)(1) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-17 | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 36 CFR 1235.4(d)(1) | ANSI X3.39 | 1986 | Recorded Magnetic Tape for Information Interchange (1600 CPI, PE) | American National Standards Institute | |
Coast Guard | 40 CFR 60, Appendix A-7, Method 19, Section 12.3.2.4 | ASTM D 1826 | 1977 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Coast Guard | 46 CFR 160.135-15(e)(1)(vi) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 46 CFR 160.156-5(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A2 | 2008 | Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations | American Wood Protection Association | |
Coast Guard | 33 CFR 154, Appendix A, 3.1 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Coast Guard | 46 CFR 160.156-13(d)(4)(iv) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 56.70-20(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 57.02-4(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(73) | ASTM F 1120 | 2010 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications | ASTM International | |
Coast Guard | 46 CFR 162.050-4(c)(1) | ISO 8217 | 2005 | Petroleum products—Fuels (class F)—Specifications of marine fuels | International Organization for Standardization | |
Coast Guard | 46 CFR 167.40-1(a)(3) | IEEE 45 | 1948 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 10.103(b)(2) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(b)(3) | ASTM D 638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Coast Guard | 33 CFR 154, Appendix A, 3.3.1 | ASME BPVC VIII-1 | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Coast Guard | 46 CFR 174.100(e)(2) | ASTM F 1197 | 2000 | Standard Specification for Sliding Watertight Door Control Systems | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(ii) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 161.002-1(b) | FM Class No. 3820 | 1979 | Electrical Utilization Equipment | Factory Mutual Engineering and Research | |
Coast Guard | 46 CFR 177.410(b)(5) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 56.15-5(c)(2)(ii)(B) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 52.01-120(c)(3) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B36.10M | 2004 | Welded and Seamless Wrought Steel Pipe | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.077-5(b)(3) | Federal Standard 191 | 1978 | Method 5134, Strength of Cloth, Tearing: Tongue Method | Federal Specifications Standards and Test Methods |