This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 54.30-5(a)(6) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IA (7) | EPA Method 1600 | 2009 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI) | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | APHA Method 4500-H+B | 2005 | pH Value by Electrometric Method | American Public Health Association | |
Coast Guard | 21 CFR 184.1095(b) | Food Chemicals Codex | 1981 | Sulfuric Acid | National Academy Press | |
Coast Guard | 46 CFR 52.01-1(b)(2) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section II, Part A—Ferrous Material Specifications and Part B—Nonferrous Material Specifications | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.29 | 2007 | Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 444.12(b)(1) Table Note (4) | EPA-600-4-79-020 | 1979 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(15) | ASTM A 210/A 210M | 1996 | Standard Specification for Seamless Medium Carbon Steel Boiler and Super Heater Tubes | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | NFPA 17A | 1994 | Standard for Wet Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 63.25-9(c)(1) | IMO MARPOL 73/78 | 1978 | The International Convention for the Prevention of Pollution from Ships (MARPOL 73/78), Annexes I, II, III, and V | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 2019.0 | 2002 | Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Rainbow Trout, Oncorhynchus mykiss, and brook trout, Salvelinus fontinalis, acute | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 420/A 420M | 1996 | Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | ASTM International | |
Coast Guard | 7 CFR 1755.522(v)(4) | FedSpec H28 | 1978 | Screw-Thread Standards for Federal Services including Change Notices 1, 2, and 3 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 199.70(b)(3)(ii) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 33 CFR 155, Appendix B, 6.3 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
Coast Guard | 46 CFR 53.01-10(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.15-5(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.261(q) High-carbon ferrochrome | ASTM A 101 | 1973 | Standard Specification for Ferrochromium | ASTM International | |
Coast Guard | 33 CFR 127.1101(a) | ASME B31.3 | 1993 | Chemical Plant and Petroleum Refinery Piping | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.111b Maximum true vapor pressure (1) | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Coast Guard | 46 CFR 160.076-25(b) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.10-1(g)(22) | IEC 92-306 | 1980 | Electrical Installation in Ships, Part 306: Equipment-Luminaries and accessories, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 13.307 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
Coast Guard | 46 CFR 114.600(b) | UL 595 | 1991 | Marine Type Electric Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 134.140(a)(4) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 177.410(b)(4) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 147.7(b)(1) | ABYC H-25 | 1981 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(3)(iv) | EPA-600-4-79-020 | 1983 | Method 375.4--Turbidimetric | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.002-4(d) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 175.600(b) Table | IMO Resolution A.688(17) | 1991 | Fire Test Procedures for Ignitability of Bedding Components | International Maritime Organization | |
Coast Guard | 46 CFR 160.052-5(e) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC E-9 | 1990 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 24 CFR 3280.604(b)(2) | ASTM B 43 | 1991 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes | ASTM International | |
Coast Guard | 46 CFR 160.005-1(a)(2) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.062-4(d)(1) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Coast Guard | 46 CFR 182.420(b) | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 164.018-11(c)(2) | Federal Test Method Standard 370 | 1977 | Instrumental Photometric Measurements of Retroflective Materials and Retroflective Devices | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 108.655(e) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 160.115-7(a)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 111.33-11 | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.135-5(b)(10) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 160.151-21(g) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15 | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(d)(1) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 21 CFR 173.368(c) | Food Chemicals Codex | 1996 | Ozone | National Academy Press | |
Coast Guard | 33 CFR 181.703 | UL 1123 | 1995 | Marine Buoyant Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.15-1(b), Corrosion resistant material or finish | IEC 68-2-52 | 1996 | Basic Environmental Testing Procedures, Part 2: Tests. Test KB: Salt Mist, Cyclic (Sodium Chloride Solution) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.170-3 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IE (3) | ASTM D 1890 | 1990 | Standard Test Method for Beta Particle Radioactivity of Water | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(21) | ASME B16.34 | 1996 | Valves--Flanged, Threaded, and Welding End | American Society of Mechanical Engineers |