This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(12) | API MPMS | 2005 | Chapter 4, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(87) | API MPMS | 2006 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(1) | AGA Report No. 7 | 2006 | Measurement of Natural Gas by Turbine Meters | American Gas Association |
Safety and Environmental Enforcement Bureau | 30 CFR 250.858(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(58) | API RP 2D | 2007 | Operation and Maintenance of Offshore Cranes | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(2) | ACI 357-R | 1984 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(3) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.908(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(2) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(10) | API MPMS | 2005 | Chapter 3—Tank Gauging | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(74) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deepwater Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(1) | API 510 | 2006 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(15) | ASTM C 33-07 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (b)(2)(v) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(52) | API RP 2SK | 2008 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(50) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(26) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 1—Lease Automatic Custody Transfer (LACT) Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(90) | API Spec. 16D | 2004 | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(30) | API MPMS | 2007 | Chapter 10, Section 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(2) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.841(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(7) | ANSI/ASME SPPE-1d, Addenda | 1996 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(58) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(43) | API MPMS | 1995 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1—Introduction | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(5) | ASTM C 595-08 | 2008 | Standard Specification for Blended Hydraulic Cements | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(13) | API MPMS | 2005 | Chapter 4, Section 5 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(18) | API MPMS | 2005 | Chapter 5, Section 3 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(88) | API RP 86 | 2005 | Recommended Practice for Measurement of Multiphase Flow; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(2)(iii)(A) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(2) | AGA Report No. 9 | 2007 | Measurement of Gas by Multipath Ultrasonic Meters Second Edition | American Gas Association |
Safety and Environmental Enforcement Bureau | 30 CFR 250.859(a)(1) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(59) | API RP 2FPS | 2001 | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(3) | ACI 357-R | 1997 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.801(b) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(11) | API MPMS | 2001 | Chapter 3—Tank Gauging | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(75) | API RP 75 | 2004 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1629(b)(1) | API 510 | 2006 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(77) | API RP 90 | 2006 | Annular Casing Pressure Management for Offshore Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(16) | ASTM C 94/C 94M-07 | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (c) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(11) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(27) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 6—Pipeline Metering Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(91) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(31) | API MPMS | 2008 | Chapter 10, Section 3 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(3) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute |