This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.58(a) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.571 | NACE RP-0169 | 2002 | Control of External Corrosion on Underground or Submerged Metallic Piping Systems, paragraphs 6.2, 6.3, 10.1.1.3. | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1709 | 2001 | Standard Test Method for Impact Resistance of Plastic Film by the Free-Falling Dart Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.400-18(b) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 176.63(f)(2) | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.153(b) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.440(b) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H50155 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(m)(2) | ISO 11114-2 | 2000 | Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(b)(40) | EPA-821-B-98-016 | 1998 | Analytical Methods for the Determination of Pollutants in Pharmaceutical Manufacturing Industry Wastewaters, EPA Method 1666 | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-17(b)(2) | ARA Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA C-8 | 1985 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.917(a) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.7(c)(2) I1 | GRI-02/0057 | 2002 | Internal Corrosion Direct Assessment of Gas Transmission Pipelines Methodology | Gas Research Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DOE CAPE–1662 | 1988 | Civilian Application Program Engineering Drawings, Revision 1 and Supplement 1 | U.S. Department of Energy | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.420(a)(2)(i) | ANSI N14.1 | 2001 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.336(b) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-16(d) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-3(b)(5) | DOE KSS-471 | 1986 | Proposal for Modifications to U.S. Department of Transportation Specification 21PF-1 Fire and Shock Resistant Phenolic Foam-Insulated Metal Overpack | U.S. Department of Energy | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.933(a) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(2) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 242 | 1981 | Standard Specification for High-Strength Low-Alloy Structural Steel | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 3807-2 | 2000 | Cylinders for acetylene--Basic requirements--Part 2: Cylinders with fusible plugs | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.315 Table Note 3 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.7(c)(2) B4 | API RP 80 | 2000 | Guidelines for the Definition of Onshore Gas Gathering Lines | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.5a(b)(2)(iii) | ASME B31.4 | 1998 | Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.124(a)(2)(ii)(C) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.137(c)(2) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1835 | 1997 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-3 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.400-20(c)(1) | ARR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.707(c)(4)(iv)(A) | ISO 535 | 1991 | Paper and Board--Determination of Water Absorptiveness--Cobb Method | International Organization for Standardization / International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.153(d) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.440(c) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H51970 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11117 | 1998 | Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-3(g)(3)(i) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-4(a)(2) | AAR Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.917(b) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.917(c) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 193.2303 | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DOE SP–9 | 1968 | Fire Resistant Phenolic Foam, Revision 1 and Supplement | U.S. Department of Energy | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102(c)(1) 39 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.337(b) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-18(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.45(h) | ASTM E 114 | 1995 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-4(a) | DOE CAPE–1662 | 1988 | Civilian Application Program Engineering Drawings, Revision 1 and Supplement 1 | U.S. Department of Energy |