This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.6(y)(3) | ISO 10156:1996 (E) | 1996 | Gases and Gas Mixtures—Determination of Fire Potential and Oxidizing Ability for the Selection of Cylinder Valve Outlets, Second Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(25) | ANSI Addenda B31.1 | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(2) | ANSI Z41 | 1999 | Personal Protection-Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(xvi) | NFPA 12A | 2004 | Standard on Halon 1301 Fire Extinguishing Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.109(j)(4)(iii) | 49 CFR 172 | 2014 | Flammable Solids | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.169(a)(2)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.169(a)(2)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.261(e)(4) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, Medium screw base | ANSI C81.61 | 2003 | Electrical Lamp Bases--Specifications for Bases (Caps) for Electric Lamps | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-237 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(3) | ASTM A 126 | 1966 | Gray iron Casting for Valves, Flanges and Pipe Fittings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(1)(i) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(6) | ASME UPV Code | 1951 | Code for Unfired Pressure Vessels for Petroleum Liquids and Gases | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.272 Appendix B | ANSI/NFPA 61C | 2014 | Feed Mills | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.95 Appendix F | HSM-11001 | 2014 | Criteria for a Recommended Standard . . . Occupational Exposure to Noise | National Institute for Occupational Safety and Health | |
Occupational Safety and Health Administration | 29 CFR 1926.6(x)(1) | ISO 11660-1:2008(E) | 2008 | Cranes—Access, guards and restraints—Part 1: General, 2d ed. | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.1414(e)(4)(ii)(C) | ASME B30.5 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, sections 5-1.3.2(a), (a)(2) through (a)(4), (b) and (d) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.102(b)(1) | NFPA 51A | 2006 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 70 | 2002 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.156 (8)(2) | NIOSH Publication | 1976 | Guide to Industrial Respiratory Protection | National Institute for Occupational Safety and Health | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(14) | NFPA 62 | 1967 | Standard for the Prevention of Dust Explosions in the Production, Packaging, and Handling of Pulverized Sugar and Cocoa | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(5)(ii) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.201(a) | DOT Publication | 2000 | Manual on Uniform Traffic Control Devices, Millennium Edition | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(38) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(50) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(D) | ASTM D 1692 | 1968 | Test for Flammability of Plastic Sheeting and Cellular Plastics | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(11)(i)(B) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(ii) Table H-25 Footnote 1 | ASTM B 210 | 1968 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(4)(ii)(B) | CGA S-1.3 | 1959 | Safety Release Device Standard--Compressed Gas Storage Containers | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(1)(i)(A)(2) | ANSI B31.1 | 1967 | Code for Pressure Piping, section 2, Industrial Gas and Air Piping Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.1a | 1963 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(c)(1) | ASAE S276.2 | 1968 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(70) | ANSI Z87.1 | 1998 | Practice of Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(9) | ASTM B 210 | 1968 | Aluminum-Alloy Drawn Seamless Tubes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ASTM D 3180 | 2002 | Calculating Coal and Coke Analyses from As-Determined to Different Bases | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE J-167 | 1970 | Protective frame with overhead protection—test procedures and performance requirements | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(21) | ASTM D 445 | 1965 | Test for Viscosity of Transparent and Opaque Liquids | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(1) Note | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(35) | NFPA 51A | 2001 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(1)(iii) | TFI M-1 | 2014 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(2) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(7) | SAE J-237 | 1971 | Front End Loaders and Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(7) | ASME B30.14, Section 14-1.7.4 | 2004 | Side Boom Tractors, General Requirements—Welded Construction | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12F | 1961 | Specification for Small Welded Production Tanks, Fifth Edition | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F 478 | 2009 | Standard Specification for In-Service Care of Insulating Line Hose and Covers | ASTM International |