This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.585(f)(1)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Coast Guard | 40 CFR 147.1850(a) | SDWA | 2013 | Oklahoma State Statutes | State of Oklahoma | |
Environmental Protection Agency | 40 CFR 1065.710 Table 2 | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(i)(C) | 29 CFR 1910.253(b)(1)(ii) | 2013 | Cylinders and Containers, Approval and Marking | Occupational Safety and Health Administration, U.S. Department of Labor | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(A)(3) | BOCA National Plumbing Code | 2013 | BOCA National Plumbing Code | Building Officials and Code Administrators International | |
Defense Department | 32 CFR 2002.14(c)(4) | NIST SP 800-53 | 2013 | Security and Privacy Controls for Federal Information Systems and Organizations | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(2) | ASTM D 93 | 2013 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 272.701(a)(1) | ILHWMP | 2013 | State of Illinois Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Illinois | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | DOC All Standards | 2013 | All specifications, standards and codes without specific reference | U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 80.47(j)(1) | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Food and Drug Administration | 40 CFR 1065.701 Table 1 | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.929(a) | HUD MPS | 2013 | Minimum Property Standards | U.S. Department of Housing and Urban Development | |
Transportation Department | 85 FR 75680 | 49 CFR 180 | CGA C 6.1–2013 | 2013 | Hazardous Materials: Adoption of Miscellaneous Petitions To Reduce Regulatory Burdens | Compressed Gas Association |
Coast Guard | 46 CFR 90.35-1(a) | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1054 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 10462:2013 | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Federal Trade Commission | 95 FR 20788 | 16 CFR 460.5 (e)(2)(xi) | ASTM E 408-13 | 2013 | Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques | ASTM International |
Mine Safety and Health Administration | 30 CFR 57.2 Explosives | 49 CFR 173.88 | 2013 | Explosives | U.S. Department of Transportation | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(ii) | API MPMS | 2013 | Chapter 5, Section 6 | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 200.926d(c)(4) | 44 CFR 60 | 2013 | National Flood Insurance Program | Federal Emergency Management Agency | |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(c)(1) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1910.120(j)(1)(ii) | 40 CFR | 2013 | EPA Hazardous Waste Container Regulations | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AA All Standards | 2013 | All specifications, standards and codes without specific reference | Aluminum Association | |
Environmental Protection Agency | 40 CFR 80.47(o)(1)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 80 | ASTM D613–13 | 2013 | Fuels Regulatory Streamlining | ASTM International |
Transportation Department | 85 FR 80544 | 49 CFR 218 | AAR S–4045–13 | 2013 | Miscellaneous Amendments to Brake System Safety Standards and Codification of Waivers | Association of American Railroads |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1068 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Federal Trade Commission | 84 FR 20777 | 16 CFR 460 | ASTM E 408–13 | 2013 | Labeling and Advertising of Home Insulation: Trade Regulation Rule | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.137(h) | Part No. 880105-000 | 2013 | Parts List and Drawings, Part 572 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (HIII-5F, Alpha Version) | Reprographic Technologies | |
Housing and Urban Development Department | 88 FR 19450 | 24 CFR 100 | HUD 2013 Rule | 2013 | Reinstatement of HUD's Discriminatory Effects Standard | U.S. Department of Housing and Urban Development |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 86 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 197.336(a) | ANSI B31.1 | 2013 | Code for Pressure Piping | American National Standards Institute | |
Coast Guard | 46 CFR 197.310(a)(1) | ASME B&PV Code | 2013 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 2700 | 2013 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.935(e)(5) | ACIL Publication | 2013 | Procedures of the American Council of Independent Laboratories | American Council of Independent Laboratories | |
Federal Motor Carrier Safety Administration | 49 CFR 393.95(a)(5) | 40 CFR 82, Subpart G | 2013 | Significant New Alternatives Policy (SNAP) | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | API RP 14FZ | 2013 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Federal Communications Commission | 88 FR 67108 | 47 CFR 2 | IEEE/ANSI C63.17–2013 | 2013 | Updating References to Standards Related to the Commission's Equipment Authorization Program | Institute of Electrical and Electronics Engineers |
Transportation Department | 87 FR 44944 | 49 CFR 173 | ISO 10462:2013 | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-995b | 2013 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1090 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 80.47(k)(3) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Coast Guard | 46 CFR 91.15-1 | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1027 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Mine Safety and Health Administration | 30 CFR 57.2 Explosives | 49 CFR 173.100 | 2013 | Explosives | U.S. Department of Transportation | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(iii) | API MPMS | 2013 | Chapter 5, Section 8 | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 200.926d(c)(4)(iv)(A)(3) | 44 CFR 60 | 2013 | National Flood Insurance Program | Federal Emergency Management Agency | |
Consumer Product Safety Commission | 16 CFR 1211.40 (d)(4) | UL 1998 | 2013 | Standard for Safety: Software in Programmable Components | Underwriters Laboratories, Inc. | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AAMA All Standards | 2013 | All specifications, standards and codes without specific reference | American Architectural Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 149 | 2013 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies | ASTM International |