This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 111.25-5(a) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Research and Special Programs Administration | 21 CFR 177.1500(d)(5)(ii) | ISO 307 | 1984 | Plastics--Polyamides--Determination of Viscosity Number | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 63.11(b)(6)(i)(A) | ASTM D 1946 | 1977 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 87.1, ICAO Annex 16 | ICAO Annex 16 | 2008 | Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition | International Civil Aviation Organization | |
Rural Utilities Service | 7 CFR 1755.902(f)(6) | ASTM D 4566 | 1998 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Research and Special Programs Administration | 21 CFR 177.2480(c)(3) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Coast Guard | 46 CFR 182.445(f) | ABYC H-24 | 1993 | Gasoline Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(168) | ASTM D 5287 | 2002 | Standard Practice for Automatic Sampling of Gaseous Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 172.736(b)(3) | AOCS Method Ca 18c-91 | 1995 | Determination of Lead by Direct Graphite Furnace Atomic Absorption Spectrophotometry | American Oil Chemists Society | |
Veterans Affairs Department | 38 CFR 17.74(f) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(39) | SAE J-977 | 1966 | Instrumentation for Laboratory Impact Tests | Professional Association of Diving Instructors | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.51(a)(1) | ALUIC regulations | 1980 | Alabama Water Pollution Control Act, Code of Alabama 1975, sections 22-22-1 through 22-22-14 | State of Alabama | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1051 | 2008 | Standard Specification for Rubber Insulating Sleeves | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (46) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-I B | 2000 | Radioactive Iodine-Percipitation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1266 | 1987 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(5)(vi) | APHA Method 4500-Cl I | 1995 | Chlorine, Iodometric Electrode | American Public Health Association | |
Federal Highway Administration | 23 CFR 650.305, AASHTO manual | AASHTO Publication | 2008 | The Manual for Bridge Evaluation | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 | ASTM D 2369 | 1990 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Energy Department | 10 CFR 434.402.1.2.2 | ASHRAE Handbook | 1993 | Fundamentals (RS-4) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 164.008-1(b) | ASTM E 119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.860(e)(6) | ASTM D 4568 | 1986 | Standard Test Method for Evaluating Compatibility between Cable Filling and Flooding Compounds and Polyolefin Cable Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-28C | 1977 | Specification for L-851 Visual Approach Slope Indicators and Accessories | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0024 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption, Revision 3.0 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154.106(f)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 59.412(b)(3) | ASTM D 1640 | 1983 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.130(e) | 40 CFR 1065.655 | 2012 | Chemical balances of fuel, intake air, and exhaust | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 38.01-5(b) | ASME B&PV Code | 1986 | ASME Boiler and Pressure Vessel Code Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (11) | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F D | 1997 | Fluoride by SPADNS Method | American Public Health Association | |
Energy Department | 10 CFR 430.3(c)(1) | ANSI C78.3 | 1991 | American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics | American National Standards Institute | |
Coast Guard | 46 CFR 160.133-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized life-saving Appliance Evaluation and Test Report Forms1 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.1(e) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(K) | EPA Method 629 | 1993 | Cyanazine by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | ASTM D 5673 | 1996 | Standard Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(g)(5) | SAE J-1892 | 1993 | Recommended Practice for Bar-Coded Vehicle Emission Configuration Label | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(1)(ii) | ANSI Z41 | 1999 | Personal Protection-Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | NFPA 1231 | 1993 | Water Supplies for Suburban and Rural Fire Fighting | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 147.800 | IAUIC regulations | 2014 | State of Iowa-administered program (Reserved) | State of Iowa | |
Environmental Protection Agency | 40 CFR 63.404(a) | EPA SW-846 | 1987 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Revision 1 | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 173.375(a) | USP 30/NF 25 | 2007 | United States Pharmacopeia (USP)/National Formulary (NF) pp. 1700-1701 | U.S. Pharmacopeial Convention | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 780.25(a)(2)(i) | USDA Technical Release 210-VI-TR60 | 2005 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Coast Guard | 21 CFR 172.167(d)(2) | HCC Publication | 1991 | Manual from the Hydrogen Peroxide Test Kit, Model HYP-1, Catalog Number 22917-00 | Hach Chemical Company | |
Research and Special Programs Administration | 49 CFR 195.3(c) E2 | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International |