This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 126.5(b) | ASTM F 1121 | 1987 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table Note 3 | ASTM Annual Book of Standards | 2004 | Water and Environmental Technology--Section 11, Vols. 11.01 and 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 795.70(f)(15) | EPA-560-6-84-003 | 1984 | Chemical fate test guidelines. Test guildeline (CG, CS-6010). Laboratory determination of the direct photolysis reaction quantum yield in aqueous solution and sunlight photolysis. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 1.8(b) | EPA Method 0051 | 1996 | Midget Impinger HCl/Cl2 Emission Sampling Train | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1917.94(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM B 306 | 1992 | Standard Specification for Copper Drainage Tube (DWV) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.106a(a)(2)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 261.1083(c)(3)(ii)(B) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Coast Guard | 46 CFR 28.380(b) | ABYC P-1 | 1986 | Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 52, Subpart N | IDSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Idaho | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.1.2 | EPA-240-B-01-003 | 2001 | EPA Requirements for Quality Assurance Project Plans for Environmental Data Operations. EPA QA/R-5 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 435.4(a)(1)(i) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (8) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 46 CFR 164.120-5(d)(12) | ISO 2555:1989(E) | 1990 | Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity by the Brookfield test method, Second Edition | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 131.130(d)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) D1 | ASME B16.1 | 1998 | Cast Iron Flanges and Flanged Fittings, Classes 25, 125, 250 and 800 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 132.130(n) | UL 19 | 1993 | Fire hose | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 154.106(e)(2) | IEC 309-2 | 1981 | Plugs, Socket-Outlets and Couplers for Industrial Purposes | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.142(a) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(C) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section B Total Coliform Methods, 4 Most Probable Number (MPN) Method, page 114 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.077-19(c)(6) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.10-1(c)(2) | ANSI/IEEE C37.27 (IEEE Std 331) | 1987 | Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuitbreakers (Using Separately Mounted Current-Limiting Fuses) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (75) | HCC Method 8009 | 1979 | Zincon Method for Zinc, Hatch Handbook of Water Analysis | Hach Chemical Company | |
Environmental Protection Agency | 40 CFR 141.420(c)(2) Table Note 7 | APHA Method 9222 G | 1998 | Membrane Filtration Qualitative (LES Endo): Total Coliform | American Public Health Association | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.4 | ICC/IBC | 2000 | International Building Code | International Code Council | |
Coast Guard | 33 CFR 183.607(a)(2) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(C)(1) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 80.1101(h)(3) | ASTM D 6751 | 2007 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (trans-Dichloroethylene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Minerals Management Service | 30 CFR 250.1629(b)(1)(i) | ANSI/ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section IV | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | CISPI 301 | 1990 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | Cast-Iron Soil Pipe Institute | |
Coast Guard | 46 CFR 111.12-7(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(2) | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.345-2(a)(1) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4162 | 1982 | Specification for Reinforced Thermosetting Resin Sewer and Industrial Pressure Pipe (RTRP) (Withdrawn 1987) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.305(g)(6) | ASTM D 781 | 1973 | Standard Test Methods for Puncture and Stiffness of Paperboard and Corrugated and Solid Fiberboard | ASTM International | |
Coast Guard | 7 CFR 1755.390(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.890(k)(7)(ii) | ASTM D 4566 | 1990 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (44) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S10.4.2.2 | Drawing No. 78051-532 | 1996 | Pelvic Angle Gauge | General Motors Corporation | |
Occupational Safety and Health Administration | 29 CFR 1910.120(j)(1)(ii) | 29 CFR 1910.134 | 2014 | Respiratory Protection | Occupational Safety and Health Administration, U.S. Department of Labor | |
National Highway Traffic Safety Administration | 9 CFR 72.5 | TX State Regulations | 2002 | TX Admin Code, Title 4, Part II, Chapter 41, Rules 41.14 through 41.22 | State of Texas | |
Rural Utilities Service | 7 CFR 1724.52(a)(2) | EEI Publication | 1996 | Suggested Practices for Raptor Protection on Power Lines: The State of the Art in 1996 | Edison Electric Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.105 S6.2.1 | SAE J-227a | 1976 | Electric Vehicle Test Procedure | Society of Automotive Engineers | |
Centers for Medicare & Medicaid Services | 42 CFR 416.44(b)(1) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.106(j)(6)(ii) | NFPA 35 | 1970 | Standard for the Manufacture of Organic Coatings | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1719 | 1997 | Standard Test Method for Vapor Pressure of Liquids by Ebulliometry | ASTM International |