This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.17(m)(1) | OMB Bulletin No. 93-17 | 1993 | Revised Statistical Definitions for Metropolitan Areas | U.S. Office of Management and Budget | |
Research and Special Programs Administration | 49 CFR 195.3(c) E5 | ASTM A 671 | 2004 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | ASTM International | |
Coast Guard | 46 CFR 160.077-5(b) | ASTM D 751 | 1995 | Standard Test Methods for Coated Fabrics | ASTM International | |
Environmental Protection Agency | 40 CFR 761.19(a)(1) | ASTM D 93 | 2009 | Standard Test Methods for Flash Point by Pensky-Martens Closed Tester | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(24) | ASTM A 312/A 312M | 1995 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | ASTM International | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(C)(3) | ICBO Unform Plumbing Code | 2013 | Uniform Plumbing Code | International Conference of Building Officials | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.420(a)(2)(iii) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154.808(b) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.1208(b)(1)(i)(A) | EPA Method 0023A | 1996 | Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofurans Emissions from Stationary Sources | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(xi) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 486A | 1992 | Wire Connectors and Soldering Lugs For Use With Copper Conductors | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(2)(i) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.36(h) | Drawing No. 78051-218 | 2009 | Hybrid III Anthropomorphic Test Dummy, Revision T | General Motors Corporation | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (4) | EPA Method 350.1 | 1993 | Ammonia Nitrogen - Colorimetric, Auto Phenate, Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | USGS O-3106-93 | 1993 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Triazine and Other Nitrogen-containing Compounds by Gas Chromatography with Nitrogen Phosphorus Detectors | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 189.130(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Public Health Service | 42 CFR 84.43(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(72) | ISO 14313:2007 | 2007 | Petroleum and natural gas industries—Pipeline transportation systems—Pipeline valves | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(xi) | EPA Method 1664 | 2010 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Non-polar Material) by Extraction and Gravimetry. Revision B, EPA-821-R-10-001 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b) Appendix (8) | ANSI/PIMA IT4.37 | 1975 | Photographic Processing Effluents | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 98.354(h)(5) | ASME MFC-11M | 2006 | Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(5) Note | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Mevinphos) | EPA Method 602 | 1982 | Purgeable Aromatics by GC/PID Purge & Trap | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 211.206-1(a) | ANSI S3.19 | 1974 | Method for the Measurement of Real-Ear Protection of Hearing Protectors and Physical Attenuation of Earmuffs | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.772(h)(4)(iii)(B)(3) | ASTM D 3588 | 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 133.5(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 147.2500(a)(1) | WIUIC regulations | 1974 | Wisconsin Statutes Annotated §§ 147.015, 147.02 and 147.04 (West 1974 and Supp. 1983) | State of Wisconsin | |
Rural Utilities Service | 7 CFR 1755.890(i)(5)(v)(A) | ASTM B 193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.3(b)(1) | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix D Table | NIOSH Publication | 1976 | Development of Criteria for Firefighters Gloves; Vol. II, Part II; Test Methods | National Institute for Occupational Safety and Health | |
Coast Guard | 46 CFR 71.75 | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.506(ee) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.71(a)(2) | RT Publication | 1991 | User's Manual, Six-Year-Old Size Child Test Dummy, SA 106C | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-123 | 1996 | Arm Assembly (LH), Complete, Revision D | General Motors Corporation | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.9 | 2003 | Factory-Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | ASTM D 2972C | 1993 | Arsenic by Graphite Furnace Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | USGS I-4668-98 | 1998 | Determination of Arsenic and Selenium in Water and Sediment by Graphite Furnace-Atomic Absorption Spectrometry | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 21 CFR 172.167(b) | Food Chemicals Codex | 2008 | Food Chemicals Codex, 6th Edition | U.S. Pharmacopeial Convention | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.11.2, a | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 33 CFR 142.27(c) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-57(b)(1) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.310(b)(8)(i) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.131(c)(1) Table (Iodometric Electrode) | APHA Method 4500-Cl I | 2000 | Chlorine, Iodometric Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(67) | ASTM D 5954 | 2006 | Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41b Pulverized coal-fired steam generating unit (Residual oil) | ASTM D 396 | 1990 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5580 | ASTM D975-08a | 2008 | Standard Specification for Diesel Fuel Oils | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.2 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute |