This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 419.13(c)(1)(i) | EPA-440-1-82-014 | 1985 | Development Document for Effluent Limitations Guidelines, New Source Performance Standards, and Pretreatment Standards for the Petroleum Refining Point Source Category, Table III-7, pp. 49-54. | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S19.4.4(a)(1) | SAE J-211/1 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(n)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 79.61(c)(3)(i)(A) | HHS Publication | 1985 | Guide for the Care and Use of Laboratory Animals | U.S. Department of Health and Human Services | |
Energy Department | 10 CFR 434.701.1 RS-6 | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6) | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, Footnote (a) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl I | 2000 | Chlorine, Iodometric Electrode | American Public Health Association | |
Coast Guard | 40 CFR 60.251(c) Bituminous coal | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 60.485(d)(1) | ASTM E 260 | 1973 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(4) | 29 CFR 1926.1001 | 2013 | Minimum Performance Criteria for Rollover Protective Structures for Designated Scrapers, Loaders, Dozers, Graders, and Crawler Tractors | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 46 CFR 164.120-5(d)(3) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.109(j)(4)(iii) | 49 CFR 172 | 2014 | Flammable Solids | U.S. Department of Transportation | |
National Archives and Records Administration | 36 CFR 1238.5(c)(9) | ISO 18911 | 2000 | Imaging materials--Processed safety photographic films--Storage practices | International Organization for Standardization | |
Coast Guard | 46 CFR 160.077-19(d)(3) | Federal Standard 191 | 1978 | Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(7) | SAE J-527a | 1967 | Brazed Double Wall Low Carbon Steel Tubing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (36) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | APHA Method 4500-SO4(2-) C | 1995 | Sulfate, Gravimetric Method with Ignition of Residue | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | NIST PS 2 | 1996 | Performance Standard for Wood-Based Structural Use Panels | National Institute of Standards and Technology, U.S. Department of Commerce | |
Mine Safety and Health Administration | 30 CFR 57.14131(c) | SAE J-386 | 1997 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 7 CFR 1755.505(f)(6) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(ff)(2) | ANSI B30.2.0 | 1967 | Safety Code for Overhead and Gantry Cranes | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (38) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 8 | DOE HASL-300 | 1997 | DOE EML Procedures Manual, 28th Edition, Volume 2 | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(v) | ASTM D 3588 | 2003 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Coast Guard | 21 CFR 145.3(m) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 21 CFR 173.165(b)(2) | FDA Publication | 1970 | Yeasts—A Toxonomic Study by Jacomina Lodder 1970 HHS/FDA | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 177.1520(d)(6) | ASTM D 1646 | 1981 | Standard Test Method for Rubber--Viscosity and Vulcanization Characteristics (Mooney Viscometer) 1981 HHS/FDA | ASTM International | |
Food and Drug Administration | 21 CFR 184.1024(b) | Food Chemicals Codex | 1981 | Bromelain | National Academy Press | |
Coast Guard | 33 CFR 127.1107 | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(32) | EPA-600-4-90-0003 | 1989 | Quality Assurance Handbook for Air Pollution Measurement Systems: Volume IV. Meteorological Measurements. | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (17) | ASTM D 1253 | 2008 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(13) | ASTM A 495 | 1994 | Standard Specification for Calcium-Silicon and Calcium Manganese-Silicon | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(8) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Public Health Service | 42 CFR 52b.12(b) | SBCCI Standard Plumbing Code | 1997 | International Standard Plumbing Code | Southern Building Code Congress International | |
Coast Guard | 46 CFR 160.005-1(a)(2) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Nuclear Regulatory Commission | 10 CFR 50.73(b)(2)(ii)(F)(2) | IEEE 803 | 1983 | Recommended Practice for Unique Identification in Power Plants and Related Facilities | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | APHA Method 4500-NO3 H | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | ASTM D 2036B | 1998 | Standard Test Methods for Cyanides in Water, Cyanides Amenable to Chlorination by Difference | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(b)(6) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(4)(iii) | EPA-600-R-95-131 | 1993 | Method 551.1--Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(75) | ASTM F 1139 | 2010 | Standard Specification for Steam Traps and Drains | ASTM International | |
Environmental Protection Agency | 40 CFR 1036.810(b)(1) | ASTM D 240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 18 | Quanti-Tray® Method | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.41(y) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.050-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5660 | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 52.741(w)(1)(i) | 35 I.A.C. 215, Subpart X | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.704(f)(7) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-16(d) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers |