This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.133-7(a)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 40 CFR 60.562–2(d) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 110.10-1(o)(2) | UL 50 | 1995 | Standard for Enclosures for Electrical Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 2598 | 2012 | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis | ASTM International | |
Coast Guard | 46 CFR 160.047-4(b) | Drawing No. 160.047-1, Sheet 1, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child--Cutting Pattern and General Arrangement, Models AK-1, and AF-1 | U.S. Coast Guard | |
Coast Guard | 46 CFR 113.05-7(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 160.151-31(d) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.051-7(i) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Coast Guard | 45 CFR 162.920(c)(3)(v) | CAQH Publication | 2011 | Phase II CORE 270: Connectivity Rule, version 2.2.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 40 CFR 60, Appendix A-5, Method 13A, Section 16.1 | ASTM D 3270 | 1991 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Coast Guard | 46 CFR 39.1005(g)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 33 CFR 157.02(b)(8) | IMO Resolution A.751(18) | 1993 | Interim Standards for Ship Manoeuvrability, Annex sections 1.2, 2.3-2.4, 3-4.2, and 5 with Explanatory Notes in MSC/Circ. 644 | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-7(b)(23) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 33 CFR 127.1203(a) | ANSI S12.13 | 1986 | Performance Requirements for Combustible Gas Detectors | American National Standards Institute | |
Coast Guard | 40 CFR 136.3(a) Table IB (23) | USGS I-4302-85 | 1978 | Cyanide - Colorimetric, Automated UV | U.S. Geological Survey | |
Coast Guard | 46 CFR 56.15-1(c)(2)(ii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.055-1(a)(3) | Federal Standard 595A | 1968 | Colors | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(e)(72) | ASTM F 1020 | 2011 | Standard Specification for Line-Blind Valves for Marine Applications | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(81) | ASTM F 1387 | 1993 | Standard Specification for Performance of Mechanically Attached Fittings | ASTM International | |
Coast Guard | 46 CFR 108.647 | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 160.176-8(k) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B18.2.2 | 1987 | Square and Hex Nuts (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IB (38) | AOAC Method 993.30 | 1998 | Nitrate (as N), mg/L | AOAC International | |
Coast Guard | 46 CFR 64.11(a) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1 with Addenda Issued December 31, 1989 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 182.458(b) | ABYC H-25 | 1981 | Portable Gasoline Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 46 CFR 164.013-3(b) | UL 1191 | 1995 | Standards for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 63.25-9(f)(6) | ISO 9096 | 2003 | Stationary source emissions—Manual determination of mass concentration of particulate matter, Second edition | International Organization for Standardization | |
Coast Guard | 46 CFR 39.1005(d)(2) | ASTM F 1271 | 1989 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protection Applications | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(F)(22) | EPA-600-R-95-131 | 1995 | Method 525.2, Rev. 2.0—Determination of organic compounds in drinking water by liquid-solid extraction and capillary column gas chromatography/mass spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(iii) | ASTM D 638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Coast Guard | 46 CFR 199.176(a)(4) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 21 CFR 172.615(a) | ASTM D 721 | 1956 | Tentative Method of Test for Oil Content of Petroleum Waxes | ASTM International | |
Coast Guard | 46 CFR 161.006-1(a)(1) | NSSC 43B11 | 2012 | Bolts, nuts, studs, and tap-rivets | Navy Supply Systems Command | |
Coast Guard | 46 CFR 175.600(b) Table | UL 710 | 1993 | Exhaust Hoods For Commercial Cooking Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.01-2(e)(14) | ASTM A 197 | 1992 | Standard Specification for Cupola Malleable Iron | ASTM International | |
Coast Guard | 46 CFR 38.25-3(a)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 172.829(b) | NutraSweet Natural™ Publication | 2001 | Specifications and Analytical Methods for Neotame | NutraSweet Natural™ | |
Coast Guard | 46 CFR 56.01-2(e)(33) | ASTM A 369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Coast Guard | 33 CFR 183.607(a)(3) | UL 1128 | 2011 | Marine Blowers | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.049-3(c)(5) | MIL-C-43006 | 1992 | Cloth, Laminated, Vinyl-Nylon, High Strength | U.S. Department of Defense | |
Coast Guard | 46 CFR 154.1400(a)(8) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 27.102(b) | NFPA 2001 | 2000 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table ID (1) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Coast Guard | 46 CFR 12.10-5(d) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 110.10-1(g)(6) | IEC 60079-0 | 2000 | Electrical apparatus for Explosive Gas Atmospheres—Part 0: General Requirements (Edition 3.1) | International Electrotechnical Commission | |
Coast Guard | 36 CFR 1237.18(b) | ISO 18923 | 2000 | Imaging Materials--Polyester-Base Magnetic Tape--Storage Practices | International Organization for Standardization | |
Coast Guard | 40 CFR 136.3(a) Table IF (Acetonitrile) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency |