This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.01-2(d)(23) | ASME B18.2.1 | 1996 | Square and Hex Bolts and Screws (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iv) | ISO 604:2002(E) | 2002 | Plastics—Determination of compressive properties, Third Edition | International Organization for Standardization | |
Coast Guard | 27 CFR 21.48(a) | National Formulary | 1980 | Formula No. 23-F | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 58.03-1(e)(1) | API RP 14C | 1986 | Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 179.212(b) | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended | International Maritime Organization | |
Coast Guard | 46 CFR 56.20-1(c)(2)(i) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.540(c)(1) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 78.01-2(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 52.01-120(d)(2) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B16.9 | 2003 | Factory-Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers | |
Coast Guard | 27 CFR 21.69(a) | National Formulary | 1980 | Formula No. 39 | U.S. Pharmacopeial Convention | |
Coast Guard | 21 CFR 177.1390(c)(3)(i)(B)(1) | FDA Publication | 1995 | Determination of Non-Volative Chloroform Soluble Residues in Retort Pouch Water Extractives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 76.01-2(d)(1) | UL 19 | 2001 | Standard for Safety, Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
Coast Guard | 36 CFR 1237.18(c) | ISO 18925 | 2002 | Imaging Materials--Optical Disc Media--Storage | International Organization for Standardization | |
Coast Guard | 46 CFR 56.01-2(e)(74) | ASTM F 1123 | 2010 | Standard Specification for Non-Metallic Expansion Joints | ASTM International | |
Coast Guard | 21 CFR 177.1585(c)(1)(i) | GE Publication | 1985 | Intrinsic Viscosity (IV) of Lexan Polycarbonate Resin By a Single Point Method using Dichloromethane as the Solvent | General Electric Co. | |
Coast Guard | 33 CFR 155.140(c)(2) | ASTM F 715 | 1995 | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage | ASTM International | |
Coast Guard | 46 CFR 52.20-25(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.25-10(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(20) | IEC 92-303 | 1980 | Electrical Installation in Ships, Part 303: Equipment-Transformers for Power and Lighting, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 110.10-1(g)(30) | IEC 60947-2 | 2003 | Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | ANSI B31.1 | 1989 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
Coast Guard | 40 CFR 60.335(a)(5) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.10-1(g)(31) | IEC 61363-1 | 1998 | Electrical Installations of Ships and Mobile and Fixed Offshore Units—Part 1: Procedures for Calculating Short-Circuit Currents in Three-Phase a.c., First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways including 1980 supplement | American National Standards Institute | |
Coast Guard | 46 CFR 161.010-1(b) | UL 1196 | 1987 | Standard for Floating Waterlights | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 164.13(d)(3) | IEC 62065 (2002-03) | 2002 | Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements, methods of testing and required test results | International Electrotechnical Commission | |
Coast Guard | 46 CFR 114.600(b) | UL 1570 | 1995 | Fluorescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 148.8(c)(1) | UN Manual of Tests and Criteria | 2009 | Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fifth revised edition | United Nations | |
Coast Guard | 46 CFR 56.20-5 | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 160.005-1(b) | Drawing No. 160.005-1 (Sheet 5) | 2012 | Pad Detail (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 34.01-15(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.047-3a(b)(1)(i) | Federal Standard 151 | 1967 | Metals, Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 182.720(e) | SAE J-1942 | 1984 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 39.2009(a)(1)(iii)(A) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 56.01-2(e)(50) | ASTM B 85 | 1996 | Standard Specification for Aluminum-Alloy Die Castings | ASTM International | |
Coast Guard | 46 CFR 182.130 | ABYC H-32 | 1987 | Ventilation of Boats Using Diesel Fuel | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-11(g)(1) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.052-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 136.3(a) Table IB (30) | ASTM D 1068A | 2005 | Standard Test Methods for Iron in Water, Atomic Absorption, Direct | ASTM International | |
Coast Guard | 21 CFR 173.370(c) | Ecolab Publication | 2000 | Hydrogen Peroxide and Peracid (as Peracetic Acid) Content | Ecolab Inc. | |
Coast Guard | 46 CFR 160.132-5(b)(2) | ASTM A 216/A 216M | 2008 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 8.110(b) | Lloyd's Publication | 1998 | Lloyd's Register of Shipping Supplemental Requirements | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1998 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 12.02-11(a)(1) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 160.135-5(d)(6) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(p) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 54.05-20(b) | ASTM A 203/A 203M | 2007 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | ASTM International | |
Coast Guard | 46 CFR 12.03-1(a) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization |