This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 170.245(b)(2) | MIL-P-21929B | 1991 | Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot | U.S. Department of Defense | |
Coast Guard | 46 CFR 92.07-1(c) | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea (SOLAS), Consolidated Text of SOLAS, and its Protocol of 1988 | International Maritime Organization | |
Coast Guard | 46 CFR 119.440(a)(3) | UL 1102 | 1992 | Non Integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 58.10-5(b)(3)(i) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 182.455(c) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Coast Guard | 24 CFR 3280.801(b) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 114.600(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 125.180(b) | UL 1570 | 1995 | Fluorescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 95.01-2(b)(1) | ASTM F 1121 | 2010 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Coast Guard | 46 CFR 111.105-40(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 154.1(b) | IMO Publication | 1976 | Code For Existing Ships Carrying Liquefied Gases in Bulk | International Maritime Organization | |
Coast Guard | 33 CFR 154, Appendix C, 6.3.1 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
Coast Guard | 46 CFR 52.05-15(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 153.940(a)(2) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
Coast Guard | 46 CFR 160.010-3(a)(5) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(k) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 177.300(c)(3) | ABS Publication | 1997 | Guide for Building and Classing High Speed Craft | American Bureau of Shipping | |
Coast Guard | 46 CFR 108.497(f) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.055-5(c)(1) | Drawing No. 160.055-1B, Sheet 2 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 63 | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.002-1(a)(4) | 46 CFR 164.003 | 2012 | Kapok, Processed | U.S. Coast Guard | |
Coast Guard | 46 CFR 56.01-2(e)(44) | ASTM B 21 | 1996 | Standard Specification for Naval Brass Rod, Bar, and Shapes | ASTM International | |
Coast Guard | 46 CFR 98.01-3(b) | ASNT RP SNT-TC-1A | 1988 | Personnel Qualification and Certification for Nondestructive Testing | American Society for Nondestructive Testing | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | APHA Method 3112 B | 1999 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Coast Guard | 46 CFR 160.077-19(c)(9) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 54.01-1(d)(1) | CGA S-1.2.5.2 | 1979 | Flow Test of Safety Relief Valves | Compressed Gas Association | |
Coast Guard | 46 CFR 160.048-1(a)(1) | MIL-B-2766 | 1967 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 11 | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (2,4-Dichloro-phenoxyacetic acid) | EPA Method 555 | 1992 | Chlorinated Acids by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 63.25-3(a) | UL 174 | 1996 | Household Electric Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.076-23(a)(1) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.133-5(b)(4) | ASTM A 314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Coast Guard | 46 CFR 160.151-21(y) | ISO 18813:2006(E) | 2006 | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 56.01-2(i)(1) | ISO 15540 | 1999 | Ships and Marine Technology-Fire Resistance of Hose Assemblies-Test Methods | International Organization for Standardization | |
Coast Guard | 46 CFR 160.135-7(b)(6)(i) | IMO MSC/Circular 980 | 2001 | Standardized life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-27(c)(3) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.049-1(a)(1) | FedSpec CCC-C-700G | 1986 | Cloth, Coated, Vinyl, Coated (Artificial Leather) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) Footnote 10 | ASTM A 520 | 1997 | Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction | ASTM International | |
Coast Guard | 46 CFR 160.156-7(b)(6) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 46 CFR 164.023-5 Table 164.023-5(a) | FedSpec V-T-285E | 1986 | Thread, Polyester | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | APHA Method 4500-H+B | 2005 | pH Value by Electrometric Method | American Public Health Association | |
Coast Guard | 46 CFR 119.440 Table 119.440(a)(1) | ASTM B 122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 160.171-17(o) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 163.003-3 | ASTM D 1435 | 1994 | Standard Practice for Outdoor Weathering of Plastics | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table Note (4) | EPA-600-4-79-020 | 1979 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 162.161-6(c) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 154.808(c) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(i) | ISO 2039-2:1987(E) | 1987 | Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 111.105-15(a) | IEC 60079-5 | 1997 | Electrical Apparatus for Explosive Gas Atmospheres—Part 5: Powder Filling “q”, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 54.15-5(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.261(q) High-carbon ferrochrome | ASTM A 101 | 1973 | Standard Specification for Ferrochromium | ASTM International |