This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 88 FR 28780 | 10 CFR 429 | ASTM C1199–14 | 2014 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | ASTM International |
Environmental Protection Agency | 40 CFR 272, Subpart FF | NJHWMP | 2014 | State of New Jersey Hazardous Waste Management Program (Reserved) | State of New Jersey | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 1065 | ASTM D445–12 | 2014 | Fuels Regulatory Streamlining | ASTM International |
Transportation Department | 85 FR 44994 | 49 CFR 172 | AAR M–1002 | 2014 | Hazardous Materials: Liquefied Natural Gas by Rail | Association of American Railroads |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | AOAC Method 973.45 | 2014 | Oxygen (dissolved) in water. Titrimetric methods | AOAC International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl D | 2014 | Chlorine, Amperometric direct | American Public Health Association | |
Agriculture Department | 84 FR 28186 | 7 CFR 1755 | Standard No. 17-2014 | 2014 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | West Coast Lumber Inspection Bureau |
Energy Department | 88 FR 28780 | 10 CFR 429 | ANSI/ASHRAE 41.6–2014 | 2014 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 12A | 2014 | Halon 1211 Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 147.2450 | WVUIC regulatons | 2014 | (Reserved) | State of West Virginia | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEC 60079–2:2014 | 2014 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1048 | SAE J2951_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Occupational Safety and Health Administration | 29 CFR 1926 Subpart L Appendix A (1)(b)(i) | NFPA Publication | 2014 | National Design Specification for Wood Construction | National Forest Products Association | |
Federal Highway Administration | 23 CFR 625.4(a)(8) | 23 CFR 626 | 2014 | Pavement Design | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 272, Subpart XX | WVHWMP | 2015 | State of West Virginia Hazardous Waste Management Program (Reserved) | State of West Virginia | |
Environmental Protection Agency | 40 CFR 435 Appendix 8, Subpart A | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.III.NCA-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 85 FR 41100 | 40 CFR 63 | ASTM D2111-10(2015) | 2015 | NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn... | ASTM International |
Environmental Protection Agency | 85 FR 49724 | 40 CFR 63 | ASTM D2369-10(2015)e1 | 2015 | National Emission Standards for Hazardous Air Pollutants: Miscellaneous Coating Manufacturing Residual Risk and Technology Review | ASTM International |
Nuclear Regulatory Commission | 85 FR 26540 | 10 CFR 50 | ASME OM Code 2015 | 2015 | American Society of Mechanical Engineers 2015-2017 Code Editions Incorporation by Reference | American Society of Mechanical Engineers |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.CC.BPV-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 258 | 2015 | Criteria for Municipal Solid Waste Landfills | U.S. Environmental Protection Agency | |
Energy Department | 85 FR 1592 | 10 CFR 431 | ANSI/AHRI 1500–2015 | 2015 | Energy Conservation Program: Energy Conservation Standards for Commercial Packaged Boilers | American National Standards Institute |
Energy Department | 87 FR 50396 | 10 CFR 429 | ANSI/ AMCA Standard 230–15 | 2015 | Energy Conservation Program: Test Procedure for Ceiling Fans | American National Standards Institute |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 11120:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 85 FR 10828 | 40 CFR 63 | ASTM D2111–10 (2015) | 2015 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans and Surface Coating of Metal Coil Residual Risk and Technology Reviews | ASTM International |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE C37.13–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEC 60079–5:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Energy Department | 87 FR 65856 | 10 CFR 429 | ANSI/ASHRAE 29-2015 (R2018) | 2015 | Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers | American National Standards Institute |
Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 41276 | 40 CFR 63 | ASTM D2111-10(2015) | 2015 | National Emission Standards for Hazardous Air Pollutants: Paper and Other Web Coating Residual Risk and Technology Review | ASTM International |
Transportation Department | 85 FR 27810 | 49 CFR 176 | ISO 22434:2006(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASME RTP-1 | 2015 | Reinforced Thermoset Plastic Corrosion-Resistant Equipment | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 435.41(e) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ISWA IWS-089 | 2015 | Insect Wire Screening (Wire Fabric) | Insect Screening Weavers Association | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.III.2-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Transportation Department | 85 FR 27810 | 49 CFR 180 | ISO 11118:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 435.11(gg) | EPA Method 1619 | 2015 | Suspended Particulate Phase (SPP) Toxicity Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.45 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.CC.NC-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 98.464(b)(2) | APHA Method 2540 G | 2015 | Total, Fixed, and Volatile Solids in Solid and Semisolid Samples NDG | American Public Health Association | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 257 | 2015 | Criteria for Classification of Solid Waste Disposal Facilities and Practices | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(3) | APHA Method 601 | 2015 | Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere | American Public Health Association | |
Energy Department | 87 FR 50396 | 10 CFR 430 | ANSI/ AMCA Standard 230–15 | 2015 | Energy Conservation Program: Test Procedure for Ceiling Fans | Air Movement and Control Association |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 11623:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 85 FR 10828 | 40 CFR 63 | ASTM D2369-10(2015)e1 | 2015 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans and Surface Coating of Metal Coil Residual Risk and Technology Reviews | ASTM International |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE C37.14–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | EPA Method 1631 | 2015 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA Method 1670 | 2015 | Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS) | U.S. Environmental Protection Agency |